Viewing file: bash.html (269.68 KB) -rw-r--r-- Select action/file-type: (+) | (+) | (+) | Code (+) | Session (+) | (+) | SDB (+) | (+) | (+) | (+) | (+) | (+) |
BASH(1) Manual Page
BASH(1) | 2006 September 28 | BASH(1)
|
Index
NAME
bash - GNU Bourne-Again SHell
SYNOPSIS
bash
[options]
[file]
COPYRIGHT
Bash is Copyright © 1989-2005 by the Free Software Foundation, Inc.
DESCRIPTION
Bash
is an sh-compatible command language interpreter that
executes commands read from the standard input or from a file.
Bash
also incorporates useful features from the Korn and C
shells (ksh and csh).
Bash
is intended to be a conformant implementation of the
Shell and Utilities portion of the IEEE POSIX specification
(IEEE Standard 1003.1).
Bash
can be configured to be POSIX-conformant by default.
OPTIONS
In addition to the single-character shell options documented in the
description of the set builtin command, bash
interprets the following options when it is invoked:
- -c string
-
If the
-c
option is present, then commands are read from
string.
If there are arguments after the
string,
they are assigned to the positional parameters, starting with
$0.
- -i
-
If the
-i
option is present, the shell is
interactive.
- -l
-
Make
bash
act as if it had been invoked as a login shell (see
INVOCATION
below).
- -r
-
If the
-r
option is present, the shell becomes
restricted
(see
RESTRICTED SHELL
below).
- -s
-
If the
-s
option is present, or if no arguments remain after option
processing, then commands are read from the standard input.
This option allows the positional parameters to be set
when invoking an interactive shell.
- -D
-
A list of all double-quoted strings preceded by $
is printed on the standard output.
These are the strings that
are subject to language translation when the current locale
is not C or POSIX.
This implies the -n option; no commands will be executed.
- [-+]O [shopt_option]
-
shopt_option is one of the shell options accepted by the
shopt builtin (see
SHELL BUILTIN COMMANDS
below).
If shopt_option is present, -O sets the value of that option;
+O unsets it.
If shopt_option is not supplied, the names and values of the shell
options accepted by shopt are printed on the standard output.
If the invocation option is +O, the output is displayed in a format
that may be reused as input.
- --
-
A
--
signals the end of options and disables further option processing.
Any arguments after the
--
are treated as filenames and arguments. An argument of
-
is equivalent to --.
Bash
also interprets a number of multi-character options.
These options must appear on the command line before the
single-character options to be recognized.
- --debugger
-
Arrange for the debugger profile to be executed before the shell
starts.
Turns on extended debugging mode (see the description of the
extdebug
option to the
shopt
builtin below)
and shell function tracing (see the description of the
-o functrace option to the
set
builtin below).
- --dump-po-strings
-
Equivalent to -D, but the output is in the GNU gettext
po (portable object) file format.
- --dump-strings
-
Equivalent to -D.
- --help
-
Display a usage message on standard output and exit successfully.
- --init-file file
-
- --rcfile file
-
Execute commands from
file
instead of the standard personal initialization file
~/.bashrc
if the shell is interactive (see
INVOCATION
below).
- --login
-
Equivalent to -l.
- --noediting
-
Do not use the GNU
readline
library to read command lines when the shell is interactive.
- --noprofile
-
Do not read either the system-wide startup file
/etc/profile
or any of the personal initialization files
~/.bash_profile,
~/.bash_login,
or
~/.profile.
By default,
bash
reads these files when it is invoked as a login shell (see
INVOCATION
below).
- --norc
-
Do not read and execute the personal initialization file
~/.bashrc
if the shell is interactive.
This option is on by default if the shell is invoked as
sh.
- --posix
-
Change the behavior of bash where the default operation differs
from the POSIX standard to match the standard (posix mode).
- --restricted
-
The shell becomes restricted (see
RESTRICTED SHELL
below).
- --verbose
-
Equivalent to -v.
- --version
-
Show version information for this instance of
bash
on the standard output and exit successfully.
ARGUMENTS
If arguments remain after option processing, and neither the
-c
nor the
-s
option has been supplied, the first argument is assumed to
be the name of a file containing shell commands.
If
bash
is invoked in this fashion,
$0
is set to the name of the file, and the positional parameters
are set to the remaining arguments.
Bash
reads and executes commands from this file, then exits.
Bash's exit status is the exit status of the last command
executed in the script.
If no commands are executed, the exit status is 0.
An attempt is first made to open the file in the current directory, and,
if no file is found, then the shell searches the directories in
PATH
for the script.
INVOCATION
A login shell is one whose first character of argument zero is a
-,
or one started with the
--login
option.
An interactive shell is one started without non-option arguments
and without the
-c
option
whose standard input and error are
both connected to terminals (as determined by
isatty(3)),
or one started with the
-i
option.
PS1
is set and
$-
includes
i
if
bash
is interactive,
allowing a shell script or a startup file to test this state.
The following paragraphs describe how
bash
executes its startup files.
If any of the files exist but cannot be read,
bash
reports an error.
Tildes are expanded in file names as described below under
Tilde Expansion
in the
EXPANSION
section.
When
bash
is invoked as an interactive login shell, or as a non-interactive shell
with the --login option, it first reads and
executes commands from the file /etc/profile, if that
file exists.
After reading that file, it looks for ~/.bash_profile,
~/.bash_login, and ~/.profile, in that order, and reads
and executes commands from the first one that exists and is readable.
The
--noprofile
option may be used when the shell is started to inhibit this behavior.
When a login shell exits,
bash
reads and executes commands from the file ~/.bash_logout, if it
exists.
When an interactive shell that is not a login shell is started,
bash
reads and executes commands from ~/.bashrc, if that file exists.
This may be inhibited by using the
--norc
option.
The --rcfile file option will force
bash
to read and execute commands from file instead of ~/.bashrc.
When
bash
is started non-interactively, to run a shell script, for example, it
looks for the variable
BASH_ENV
in the environment, expands its value if it appears there, and uses the
expanded value as the name of a file to read and execute.
Bash
behaves as if the following command were executed:
-
if [ -n "$BASH_ENV" ]; then . "$BASH_ENV"; fi
but the value of the
PATH
variable is not used to search for the file name.
If
bash
is invoked with the name
sh,
it tries to mimic the startup behavior of historical versions of
sh
as closely as possible,
while conforming to the POSIX standard as well.
When invoked as an interactive login shell, or a non-interactive
shell with the --login option, it first attempts to
read and execute commands from
/etc/profile
and
~/.profile,
in that order.
The
--noprofile
option may be used to inhibit this behavior.
When invoked as an interactive shell with the name
sh,
bash
looks for the variable
ENV,
expands its value if it is defined, and uses the
expanded value as the name of a file to read and execute.
Since a shell invoked as
sh
does not attempt to read and execute commands from any other startup
files, the
--rcfile
option has no effect.
A non-interactive shell invoked with the name
sh
does not attempt to read any other startup files.
When invoked as
sh,
bash
enters
posix
mode after the startup files are read.
When
bash
is started in
posix
mode, as with the
--posix
command line option, it follows the POSIX standard for startup files.
In this mode, interactive shells expand the
ENV
variable and commands are read and executed from the file
whose name is the expanded value.
No other startup files are read.
Bash
attempts to determine when it is being run by the remote shell
daemon, usually rshd.
If
bash
determines it is being run by rshd, it reads and executes
commands from ~/.bashrc, if that file exists and is readable.
It will not do this if invoked as sh.
The
--norc
option may be used to inhibit this behavior, and the
--rcfile
option may be used to force another file to be read, but
rshd does not generally invoke the shell with those options
or allow them to be specified.
If the shell is started with the effective user (group) id not equal to the
real user (group) id, and the -p option is not supplied, no startup
files are read, shell functions are not inherited from the environment, the
SHELLOPTS
variable, if it appears in the environment, is ignored,
and the effective user id is set to the real user id.
If the -p option is supplied at invocation, the startup behavior is
the same, but the effective user id is not reset.
DEFINITIONS
The following definitions are used throughout the rest of this
document.
- blank
-
A space or tab.
- word
-
A sequence of characters considered as a single unit by the shell.
Also known as a
token.
- name
-
A
word
consisting only of alphanumeric characters and underscores, and
beginning with an alphabetic character or an underscore. Also
referred to as an
identifier.
- metacharacter
-
A character that, when unquoted, separates words. One of the following:
-
| & ; ( ) < > space tab
- control operator
-
A token that performs a control function. It is one of the following
symbols:
-
|| & && ; ;; ( ) | <newline>
RESERVED WORDS
Reserved words are words that have a special meaning to the shell.
The following words are recognized as reserved when unquoted and either
the first word of a simple command (see
SHELL GRAMMAR
below) or the third word of a
case
or
for
command:
-
! case do done elif else esac fi for function if in select then until while { } time [[ ]]
SHELL GRAMMAR
Simple Commands
A simple command is a sequence of optional variable assignments
followed by blank-separated words and redirections, and
terminated by a control operator. The first word
specifies the command to be executed, and is passed as argument zero.
The remaining words are passed as arguments to the invoked command.
The return value of a simple command is its exit status, or
128+n if the command is terminated by signal
n.
Pipelines
A pipeline is a sequence of one or more commands separated by
the character
|.
The format for a pipeline is:
-
[time [-p]] [ ! ] command [ | command2 ... ]
The standard output of
command
is connected via a pipe to the standard input of
command2.
This connection is performed before any redirections specified by the
command (see
REDIRECTION
below).
The return status of a pipeline is the exit status of the last
command, unless the pipefail option is enabled.
If pipefail is enabled, the pipeline's return status is the
value of the last (rightmost) command to exit with a non-zero status,
or zero if all commands exit successfully.
If the reserved word
!
precedes a pipeline, the exit status of that pipeline is the logical
negation of the exit status as described above.
The shell waits for all commands in the pipeline to
terminate before returning a value.
If the
time
reserved word precedes a pipeline, the elapsed as well as user and
system time consumed by its execution are reported when the pipeline
terminates.
The -p option changes the output format to that specified by POSIX.
The
TIMEFORMAT
variable may be set to a format string that specifies how the timing
information should be displayed; see the description of
TIMEFORMAT
under
Shell Variables
below.
Each command in a pipeline is executed as a separate process (i.e., in a
subshell).
Lists
A list is a sequence of one or more pipelines separated by one
of the operators
;,
&,
&&,
or
||,
and optionally terminated by one of
;,
&,
or
<newline>.
Of these list operators,
&&
and
||
have equal precedence, followed by
;
and
&,
which have equal precedence.
A sequence of one or more newlines may appear in a list instead
of a semicolon to delimit commands.
If a command is terminated by the control operator
&,
the shell executes the command in the background
in a subshell. The shell does not wait for the command to
finish, and the return status is 0. Commands separated by a
;
are executed sequentially; the shell waits for each
command to terminate in turn. The return status is the
exit status of the last command executed.
The control operators
&&
and
||
denote AND lists and OR lists, respectively.
An AND list has the form
-
command1 && command2
command2
is executed if, and only if,
command1
returns an exit status of zero.
An OR list has the form
-
command1 || command2
command2
is executed if and only if
command1
returns a non-zero exit status. The return status of
AND and OR lists is the exit status of the last command
executed in the list.
Compound Commands
A compound command is one of the following:
- (list)
-
list is executed in a subshell environment (see
COMMAND EXECUTION ENVIRONMENT
below).
Variable assignments and builtin
commands that affect the shell's environment do not remain in effect
after the command completes. The return status is the exit status of
list.
- { list; }
-
list is simply executed in the current shell environment.
list must be terminated with a newline or semicolon.
This is known as a group command.
The return status is the exit status of
list.
Note that unlike the metacharacters ( and ), { and
} are reserved words and must occur where a reserved
word is permitted to be recognized. Since they do not cause a word
break, they must be separated from list by whitespace.
- ((expression))
-
The expression is evaluated according to the rules described
below under
ARITHMETIC EVALUATION.
If the value of the expression is non-zero, the return status is 0;
otherwise the return status is 1. This is exactly equivalent to
let "expression".
- [[ expression ]]
-
Return a status of 0 or 1 depending on the evaluation of
the conditional expression expression.
Expressions are composed of the primaries described below under
CONDITIONAL EXPRESSIONS.
Word splitting and pathname expansion are not performed on the words
between the [[ and ]]; tilde expansion, parameter and
variable expansion, arithmetic expansion, command substitution, process
substitution, and quote removal are performed.
Conditional operators such as -f must be unquoted to be recognized
as primaries.
When the == and != operators are used, the string to the
right of the operator is considered a pattern and matched according
to the rules described below under Pattern Matching.
If the shell option
nocasematch
is enabled, the match is performed without regard to the case
of alphabetic characters.
The return value is 0 if the string matches (==) or does not match
(!=) the pattern, and 1 otherwise.
Any part of the pattern may be quoted to force it to be matched as a
string.
An additional binary operator, =~, is available, with the same
precedence as == and !=.
When it is used, the string to the right of the operator is considered
an extended regular expression and matched accordingly (as in regex(3)).
The return value is 0 if the string matches
the pattern, and 1 otherwise.
If the regular expression is syntactically incorrect, the conditional
expression's return value is 2.
If the shell option
nocasematch
is enabled, the match is performed without regard to the case
of alphabetic characters.
Substrings matched by parenthesized subexpressions within the regular
expression are saved in the array variable BASH_REMATCH.
The element of BASH_REMATCH with index 0 is the portion of the string
matching the entire regular expression.
The element of BASH_REMATCH with index n is the portion of the
string matching the nth parenthesized subexpression.
Expressions may be combined using the following operators, listed
in decreasing order of precedence:
-
- ( expression )
-
Returns the value of expression.
This may be used to override the normal precedence of operators.
- ! expression
-
True if
expression
is false.
- expression1 && expression2
-
True if both
expression1
and
expression2
are true.
- expression1 || expression2
-
True if either
expression1
or
expression2
is true.
The && and
||
operators do not evaluate expression2 if the value of
expression1 is sufficient to determine the return value of
the entire conditional expression.
- for name [ in word ] ; do list ; done
-
The list of words following in is expanded, generating a list
of items.
The variable name is set to each element of this list
in turn, and list is executed each time.
If the in word is omitted, the for command executes
list once for each positional parameter that is set (see
PARAMETERS
below).
The return status is the exit status of the last command that executes.
If the expansion of the items following in results in an empty
list, no commands are executed, and the return status is 0.
- for (( expr1 ; expr2 ; expr3 )) ; do list ; done
-
First, the arithmetic expression expr1 is evaluated according
to the rules described below under
ARITHMETIC EVALUATION.
The arithmetic expression expr2 is then evaluated repeatedly
until it evaluates to zero.
Each time expr2 evaluates to a non-zero value, list is
executed and the arithmetic expression expr3 is evaluated.
If any expression is omitted, it behaves as if it evaluates to 1.
The return value is the exit status of the last command in list
that is executed, or false if any of the expressions is invalid.
- select name [ in word ] ; do list ; done
-
The list of words following in is expanded, generating a list
of items. The set of expanded words is printed on the standard
error, each preceded by a number. If the in
word is omitted, the positional parameters are printed (see
PARAMETERS
below). The
PS3
prompt is then displayed and a line read from the standard input.
If the line consists of a number corresponding to one of
the displayed words, then the value of
name
is set to that word. If the line is empty, the words and prompt
are displayed again. If EOF is read, the command completes. Any
other value read causes
name
to be set to null. The line read is saved in the variable
REPLY.
The
list
is executed after each selection until a
break
command is executed.
The exit status of
select
is the exit status of the last command executed in
list,
or zero if no commands were executed.
- case word in [ [(] pattern [ | pattern ]
-
A case command first expands word, and tries to match
it against each pattern in turn, using the same matching rules
as for pathname expansion (see
Pathname Expansion
below).
The word is expanded using tilde
expansion, parameter and variable expansion, arithmetic substitution,
command substitution, process substitution and quote removal.
Each pattern examined is expanded using tilde
expansion, parameter and variable expansion, arithmetic substitution,
command substitution, and process substitution.
If the shell option
nocasematch
is enabled, the match is performed without regard to the case
of alphabetic characters.
When a match is found, the
corresponding list is executed. After the first match, no
subsequent matches are attempted. The exit status is zero if no
pattern matches. Otherwise, it is the exit status of the
last command executed in list.
- if list; then list; [ elif list; then list; ] ... [ else list; ] fi
-
The
if
list
is executed. If its exit status is zero, the
then list is executed. Otherwise, each elif
list is executed in turn, and if its exit status is zero,
the corresponding then list is executed and the
command completes. Otherwise, the else list is
executed, if present. The exit status is the exit status of the
last command executed, or zero if no condition tested true.
- while list; do list; done
-
- until list; do list; done
-
The while command continuously executes the do
list as long as the last command in list returns
an exit status of zero. The until command is identical
to the while command, except that the test is negated;
the
do
list
is executed as long as the last command in
list
returns a non-zero exit status.
The exit status of the while and until commands
is the exit status
of the last do list command executed, or zero if
none was executed.
Shell Function Definitions
A shell function is an object that is called like a simple command and
executes a compound command with a new set of positional parameters.
Shell functions are declared as follows:
- [ function ] name () compound-command [redirection]
-
This defines a function named name.
The reserved word function is optional.
If the function reserved word is supplied, the parentheses are optional.
The body of the function is the compound command
compound-command
(see Compound Commands above).
That command is usually a list of commands between { and }, but
may be any command listed under Compound Commands above.
compound-command is executed whenever name is specified as the
name of a simple command.
Any redirections (see
REDIRECTION
below) specified when a function is defined are performed
when the function is executed.
The exit status of a function definition is zero unless a syntax error
occurs or a readonly function with the same name already exists.
When executed, the exit status of a function is the exit status of the
last command executed in the body. (See
FUNCTIONS
below.)
COMMENTS
In a non-interactive shell, or an interactive shell in which the
interactive_comments
option to the
shopt
builtin is enabled (see
SHELL BUILTIN COMMANDS
below), a word beginning with
#
causes that word and all remaining characters on that line to
be ignored. An interactive shell without the
interactive_comments
option enabled does not allow comments. The
interactive_comments
option is on by default in interactive shells.
QUOTING
Quoting is used to remove the special meaning of certain
characters or words to the shell. Quoting can be used to
disable special treatment for special characters, to prevent
reserved words from being recognized as such, and to prevent
parameter expansion.
Each of the metacharacters listed above under
DEFINITIONS
has special meaning to the shell and must be quoted if it is to
represent itself.
When the command history expansion facilities are being used
(see
HISTORY EXPANSION
below), the
history expansion character, usually !, must be quoted
to prevent history expansion.
There are three quoting mechanisms: the
escape character,
single quotes, and double quotes.
A non-quoted backslash (\) is the
escape character.
It preserves the literal value of the next character that follows,
with the exception of <newline>. If a \<newline> pair
appears, and the backslash is not itself quoted, the \<newline>
is treated as a line continuation (that is, it is removed from the
input stream and effectively ignored).
Enclosing characters in single quotes preserves the literal value
of each character within the quotes. A single quote may not occur
between single quotes, even when preceded by a backslash.
Enclosing characters in double quotes preserves the literal value
of all characters within the quotes, with the exception of
$,
`,
\,
and, when history expansion is enabled,
!.
The characters
$
and
`
retain their special meaning within double quotes. The backslash
retains its special meaning only when followed by one of the following
characters:
$,
`,
",
\,
or
<newline>.
A double quote may be quoted within double quotes by preceding it with
a backslash.
If enabled, history expansion will be performed unless an
!
appearing in double quotes is escaped using a backslash.
The backslash preceding the
!
is not removed.
The special parameters
*
and
@
have special meaning when in double
quotes (see
PARAMETERS
below).
Words of the form $aqstringaq are treated specially. The
word expands to string, with backslash-escaped characters replaced
as specified by the ANSI C standard. Backslash escape sequences, if
present, are decoded as follows:
-
- \a
-
alert (bell)
- \b
-
backspace
- \e
-
an escape character
- \f
-
form feed
- \n
-
new line
- \r
-
carriage return
- \t
-
horizontal tab
- \v
-
vertical tab
- \\
-
backslash
- \aq
-
single quote
- \nnn
-
the eight-bit character whose value is the octal value nnn
(one to three digits)
- \xHH
-
the eight-bit character whose value is the hexadecimal value HH
(one or two hex digits)
- \cx
-
a control-x character
The expanded result is single-quoted, as if the dollar sign had
not been present.
A double-quoted string preceded by a dollar sign ($) will cause
the string to be translated according to the current locale.
If the current locale is C or POSIX, the dollar sign
is ignored.
If the string is translated and replaced, the replacement is
double-quoted.
PARAMETERS
A
parameter
is an entity that stores values.
It can be a
name,
a number, or one of the special characters listed below under
Special Parameters.
A
variable
is a parameter denoted by a
name.
A variable has a value and zero or more attributes.
Attributes are assigned using the
declare
builtin command (see
declare
below in
SHELL BUILTIN COMMANDS).
A parameter is set if it has been assigned a value. The null string is
a valid value. Once a variable is set, it may be unset only by using
the
unset
builtin command (see
SHELL BUILTIN COMMANDS
below).
A
variable
may be assigned to by a statement of the form
-
name=[value]
If
value
is not given, the variable is assigned the null string. All
values
undergo tilde expansion, parameter and variable expansion,
command substitution, arithmetic expansion, and quote
removal (see
EXPANSION
below). If the variable has its
integer
attribute set, then
value
is evaluated as an arithmetic expression even if the $((...)) expansion is
not used (see
Arithmetic Expansion
below).
Word splitting is not performed, with the exception
of "$@" as explained below under
Special Parameters.
Pathname expansion is not performed.
Assignment statements may also appear as arguments to the
alias,
declare,
typeset,
export,
readonly,
and
local
builtin commands.
In the context where an assignment statement is assigning a value
to a shell variable or array index, the += operator can be used to
append to or add to the variable's previous value.
When += is applied to a variable for which the integer attribute has been
set, value is evaluated as an arithmetic expression and added to the
variable's current value, which is also evaluated.
When += is applied to an array variable using compound assignment (see
Arrays
below), the
variable's value is not unset (as it is when using =), and new values are
appended to the array beginning at one greater than the array's maximum index.
When applied to a string-valued variable, value is expanded and
appended to the variable's value.
Positional Parameters
A
positional parameter
is a parameter denoted by one or more
digits, other than the single digit 0. Positional parameters are
assigned from the shell's arguments when it is invoked,
and may be reassigned using the
set
builtin command. Positional parameters may not be assigned to
with assignment statements. The positional parameters are
temporarily replaced when a shell function is executed (see
FUNCTIONS
below).
When a positional parameter consisting of more than a single
digit is expanded, it must be enclosed in braces (see
EXPANSION
below).
Special Parameters
The shell treats several parameters specially. These parameters may
only be referenced; assignment to them is not allowed.
- *
-
Expands to the positional parameters, starting from one. When the
expansion occurs within double quotes, it expands to a single word
with the value of each parameter separated by the first character
of the
IFS
special variable. That is, "$*" is equivalent
to "$1c$2c...", where
c
is the first character of the value of the
IFS
variable. If
IFS
is unset, the parameters are separated by spaces.
If
IFS
is null, the parameters are joined without intervening separators.
- @
-
Expands to the positional parameters, starting from one. When the
expansion occurs within double quotes, each parameter expands to a
separate word. That is, "$@" is equivalent to
"$1" "$2" ...
If the double-quoted expansion occurs within a word, the expansion of
the first parameter is joined with the beginning part of the original
word, and the expansion of the last parameter is joined with the last
part of the original word.
When there are no positional parameters, "$@" and
$@
expand to nothing (i.e., they are removed).
- #
-
Expands to the number of positional parameters in decimal.
- ?
-
Expands to the status of the most recently executed foreground
pipeline.
- -
-
Expands to the current option flags as specified upon invocation,
by the
set
builtin command, or those set by the shell itself
(such as the
-i
option).
- $
-
Expands to the process ID of the shell. In a () subshell, it
expands to the process ID of the current shell, not the
subshell.
- !
-
Expands to the process ID of the most recently executed background
(asynchronous) command.
- 0
-
Expands to the name of the shell or shell script. This is set at
shell initialization. If
bash
is invoked with a file of commands,
$0
is set to the name of that file. If
bash
is started with the
-c
option, then
$0
is set to the first argument after the string to be
executed, if one is present. Otherwise, it is set
to the file name used to invoke
bash,
as given by argument zero.
- _
-
At shell startup, set to the absolute pathname used to invoke the
shell or shell script being executed as passed in the environment
or argument list.
Subsequently, expands to the last argument to the previous command,
after expansion.
Also set to the full pathname used to invoke each command executed
and placed in the environment exported to that command.
When checking mail, this parameter holds the name of the mail file
currently being checked.
Shell Variables
The following variables are set by the shell:
- BASH
-
Expands to the full file name used to invoke this instance of
bash.
- BASH_ARGC
-
An array variable whose values are the number of parameters in each
frame of the current bash execution call stack.
The number of
parameters to the current subroutine (shell function or script executed
with . or source) is at the top of the stack.
When a subroutine is executed, the number of parameters passed is pushed onto
BASH_ARGC.
The shell sets BASH_ARGC only when in extended debugging mode
(see the description of the
extdebug
option to the
shopt
builtin below)
- BASH_ARGV
-
An array variable containing all of the parameters in the current bash
execution call stack. The final parameter of the last subroutine call
is at the top of the stack; the first parameter of the initial call is
at the bottom. When a subroutine is executed, the parameters supplied
are pushed onto BASH_ARGV.
The shell sets BASH_ARGV only when in extended debugging mode
(see the description of the
extdebug
option to the
shopt
builtin below)
- BASH_COMMAND
-
The command currently being executed or about to be executed, unless the
shell is executing a command as the result of a trap,
in which case it is the command executing at the time of the trap.
- BASH_EXECUTION_STRING
-
The command argument to the -c invocation option.
- BASH_LINENO
-
An array variable whose members are the line numbers in source files
corresponding to each member of FUNCNAME.
${BASH_LINENO[$i]} is the line number in the source
file where ${FUNCNAME[$ifP]} was called.
The corresponding source file name is ${BASH_SOURCE[$i]}.
Use LINENO to obtain the current line number.
- BASH_REMATCH
-
An array variable whose members are assigned by the =~ binary
operator to the [[ conditional command.
The element with index 0 is the portion of the string
matching the entire regular expression.
The element with index n is the portion of the
string matching the nth parenthesized subexpression.
This variable is read-only.
- BASH_SOURCE
-
An array variable whose members are the source filenames corresponding
to the elements in the FUNCNAME array variable.
- BASH_SUBSHELL
-
Incremented by one each time a subshell or subshell environment is spawned.
The initial value is 0.
- BASH_VERSINFO
-
A readonly array variable whose members hold version information for
this instance of
bash.
The values assigned to the array members are as follows:
-
- BASH_VERSINFO[0]
-
The major version number (the release).
- BASH_VERSINFO[1]
-
The minor version number (the version).
- BASH_VERSINFO[2]
-
The patch level.
- BASH_VERSINFO[3]
-
The build version.
- BASH_VERSINFO[4]
-
The release status (e.g., beta1).
- BASH_VERSINFO[5]
-
The value of MACHTYPE.
- BASH_VERSION
-
Expands to a string describing the version of this instance of
bash.
- COMP_CWORD
-
An index into ${COMP_WORDS} of the word containing the current
cursor position.
This variable is available only in shell functions invoked by the
programmable completion facilities (see Programmable Completion
below).
- COMP_LINE
-
The current command line.
This variable is available only in shell functions and external
commands invoked by the
programmable completion facilities (see Programmable Completion
below).
- COMP_POINT
-
The index of the current cursor position relative to the beginning of
the current command.
If the current cursor position is at the end of the current command,
the value of this variable is equal to ${#COMP_LINE}.
This variable is available only in shell functions and external
commands invoked by the
programmable completion facilities (see Programmable Completion
below).
- COMP_WORDBREAKS
-
The set of characters that the Readline library treats as word
separators when performing word completion.
If
COMP_WORDBREAKS
is unset, it loses its special properties, even if it is
subsequently reset.
- COMP_WORDS
-
An array variable (see Arrays below) consisting of the individual
words in the current command line.
The words are split on shell metacharacters as the shell parser would
separate them.
This variable is available only in shell functions invoked by the
programmable completion facilities (see Programmable Completion
below).
- DIRSTACK
-
An array variable (see
Arrays
below) containing the current contents of the directory stack.
Directories appear in the stack in the order they are displayed by the
dirs
builtin.
Assigning to members of this array variable may be used to modify
directories already in the stack, but the
pushd
and
popd
builtins must be used to add and remove directories.
Assignment to this variable will not change the current directory.
If
DIRSTACK
is unset, it loses its special properties, even if it is
subsequently reset.
- EUID
-
Expands to the effective user ID of the current user, initialized at
shell startup. This variable is readonly.
- FUNCNAME
-
An array variable containing the names of all shell functions
currently in the execution call stack.
The element with index 0 is the name of any currently-executing
shell function.
The bottom-most element is "main".
This variable exists only when a shell function is executing.
Assignments to
FUNCNAME
have no effect and return an error status.
If
FUNCNAME
is unset, it loses its special properties, even if it is
subsequently reset.
- GROUPS
-
An array variable containing the list of groups of which the current
user is a member.
Assignments to
GROUPS
have no effect and return an error status.
If
GROUPS
is unset, it loses its special properties, even if it is
subsequently reset.
- HISTCMD
-
The history number, or index in the history list, of the current
command.
If
HISTCMD
is unset, it loses its special properties, even if it is
subsequently reset.
- HOSTNAME
-
Automatically set to the name of the current host.
- HOSTTYPE
-
Automatically set to a string that uniquely
describes the type of machine on which
bash
is executing.
The default is system-dependent.
- LINENO
-
Each time this parameter is referenced, the shell substitutes
a decimal number representing the current sequential line number
(starting with 1) within a script or function. When not in a
script or function, the value substituted is not guaranteed to
be meaningful.
If
LINENO
is unset, it loses its special properties, even if it is
subsequently reset.
- MACHTYPE
-
Automatically set to a string that fully describes the system
type on which
bash
is executing, in the standard GNU cpu-company-system format.
The default is system-dependent.
- OLDPWD
-
The previous working directory as set by the
cd
command.
- OPTARG
-
The value of the last option argument processed by the
getopts
builtin command (see
SHELL BUILTIN COMMANDS
below).
- OPTIND
-
The index of the next argument to be processed by the
getopts
builtin command (see
SHELL BUILTIN COMMANDS
below).
- OSTYPE
-
Automatically set to a string that
describes the operating system on which
bash
is executing.
The default is system-dependent.
- PIPESTATUS
-
An array variable (see
Arrays
below) containing a list of exit status values from the processes
in the most-recently-executed foreground pipeline (which may
contain only a single command).
- PPID
-
The process ID of the shell's parent. This variable is readonly.
- PWD
-
The current working directory as set by the
cd
command.
- RANDOM
-
Each time this parameter is referenced, a random integer between
0 and 32767 is
generated. The sequence of random numbers may be initialized by assigning
a value to
RANDOM.
If
RANDOM
is unset, it loses its special properties, even if it is
subsequently reset.
- REPLY
-
Set to the line of input read by the
read
builtin command when no arguments are supplied.
- SECONDS
-
Each time this parameter is
referenced, the number of seconds since shell invocation is returned. If a
value is assigned to
SECONDS,
the value returned upon subsequent
references is
the number of seconds since the assignment plus the value assigned.
If
SECONDS
is unset, it loses its special properties, even if it is
subsequently reset.
- SHELLOPTS
-
A colon-separated list of enabled shell options. Each word in
the list is a valid argument for the
-o
option to the
set
builtin command (see
SHELL BUILTIN COMMANDS
below). The options appearing in
SHELLOPTS
are those reported as
on
by set -o.
If this variable is in the environment when
bash
starts up, each shell option in the list will be enabled before
reading any startup files.
This variable is read-only.
- SHLVL
-
Incremented by one each time an instance of
bash
is started.
- UID
-
Expands to the user ID of the current user, initialized at shell startup.
This variable is readonly.
The following variables are used by the shell. In some cases,
bash
assigns a default value to a variable; these cases are noted
below.
- BASH_ENV
-
If this parameter is set when bash is executing a shell script,
its value is interpreted as a filename containing commands to
initialize the shell, as in
~/.bashrc.
The value of
BASH_ENV
is subjected to parameter expansion, command substitution, and arithmetic
expansion before being interpreted as a file name.
PATH
is not used to search for the resultant file name.
- CDPATH
-
The search path for the
cd
command.
This is a colon-separated list of directories in which the shell looks
for destination directories specified by the
cd
command.
A sample value is
".:~:/usr".
- COLUMNS
-
Used by the select builtin command to determine the terminal width
when printing selection lists. Automatically set upon receipt of a SIGWINCH.
- COMPREPLY
-
An array variable from which bash reads the possible completions
generated by a shell function invoked by the programmable completion
facility (see Programmable Completion below).
- EMACS
-
If bash finds this variable in the environment when the shell starts
with value
t,
it assumes that the shell is running in an emacs shell buffer and disables
line editing.
- FCEDIT
-
The default editor for the
fc
builtin command.
- FIGNORE
-
A colon-separated list of suffixes to ignore when performing
filename completion (see
READLINE
below).
A filename whose suffix matches one of the entries in
FIGNORE
is excluded from the list of matched filenames.
A sample value is
".o:~".
- GLOBIGNORE
-
A colon-separated list of patterns defining the set of filenames to
be ignored by pathname expansion.
If a filename matched by a pathname expansion pattern also matches one
of the patterns in
GLOBIGNORE,
it is removed from the list of matches.
- HISTCONTROL
-
A colon-separated list of values controlling how commands are saved on
the history list.
If the list of values includes
ignorespace,
lines which begin with a
space
character are not saved in the history list.
A value of
ignoredups
causes lines matching the previous history entry to not be saved.
A value of
ignoreboth
is shorthand for ignorespace and ignoredups.
A value of
erasedups
causes all previous lines matching the current line to be removed from
the history list before that line is saved.
Any value not in the above list is ignored.
If HISTCONTROL is unset, or does not include a valid value,
all lines read by the shell parser are saved on the history list,
subject to the value of
HISTIGNORE.
The second and subsequent lines of a multi-line compound command are
not tested, and are added to the history regardless of the value of
HISTCONTROL.
- HISTFILE
-
The name of the file in which command history is saved (see
HISTORY
below). The default value is ~/.bash_history. If unset, the
command history is not saved when an interactive shell exits.
- HISTFILESIZE
-
The maximum number of lines contained in the history file. When this
variable is assigned a value, the history file is truncated, if
necessary, by removing the oldest entries,
to contain no more than that number of lines. The default
value is 500. The history file is also truncated to this size after
writing it when an interactive shell exits.
- HISTIGNORE
-
A colon-separated list of patterns used to decide which command lines
should be saved on the history list. Each pattern is anchored at the
beginning of the line and must match the complete line (no implicit
`*' is appended). Each pattern is tested against the line
after the checks specified by
HISTCONTROL
are applied.
In addition to the normal shell pattern matching characters, `&'
matches the previous history line. `&' may be escaped using a
backslash; the backslash is removed before attempting a match.
The second and subsequent lines of a multi-line compound command are
not tested, and are added to the history regardless of the value of
HISTIGNORE.
- HISTSIZE
-
The number of commands to remember in the command history (see
HISTORY
below). The default value is 500.
- HISTTIMEFORMAT
-
If this variable is set and not null, its value is used as a format string
for strftime(3) to print the time stamp associated with each history
entry displayed by the history builtin.
If this variable is set, time stamps are written to the history file so
they may be preserved across shell sessions.
- HOME
-
The home directory of the current user; the default argument for the
cd builtin command.
The value of this variable is also used when performing tilde expansion.
- HOSTFILE
-
Contains the name of a file in the same format as
/etc/hosts
that should be read when the shell needs to complete a
hostname.
The list of possible hostname completions may be changed while the
shell is running;
the next time hostname completion is attempted after the
value is changed,
bash
adds the contents of the new file to the existing list.
If
HOSTFILE
is set, but has no value, bash attempts to read
/etc/hosts
to obtain the list of possible hostname completions.
When
HOSTFILE
is unset, the hostname list is cleared.
- IFS
-
The
Internal Field Separator
that is used
for word splitting after expansion and to
split lines into words with the
read
builtin command. The default value is
``<space><tab><newline>''.
- IGNOREEOF
-
Controls the
action of an interactive shell on receipt of an
EOF
character as the sole input. If set, the value is the number of
consecutive
EOF
characters which must be
typed as the first characters on an input line before
bash
exits. If the variable exists but does not have a numeric value, or
has no value, the default value is 10. If it does not exist,
EOF
signifies the end of input to the shell.
- INPUTRC
-
The filename for the
readline
startup file, overriding the default of
~/.inputrc
(see
READLINE
below).
- LANG
-
Used to determine the locale category for any category not specifically
selected with a variable starting with LC_.
- LC_ALL
-
This variable overrides the value of LANG and any other
LC_ variable specifying a locale category.
- LC_COLLATE
-
This variable determines the collation order used when sorting the
results of pathname expansion, and determines the behavior of range
expressions, equivalence classes, and collating sequences within
pathname expansion and pattern matching.
- LC_CTYPE
-
This variable determines the interpretation of characters and the
behavior of character classes within pathname expansion and pattern
matching.
- LC_MESSAGES
-
This variable determines the locale used to translate double-quoted
strings preceded by a $.
- LC_NUMERIC
-
This variable determines the locale category used for number formatting.
- LINES
-
Used by the select builtin command to determine the column length
for printing selection lists. Automatically set upon receipt of a SIGWINCH.
- MAIL
-
If this parameter is set to a file name and the
MAILPATH
variable is not set,
bash
informs the user of the arrival of mail in the specified file.
- MAILCHECK
-
Specifies how
often (in seconds)
bash
checks for mail. The default is 60 seconds. When it is time to check
for mail, the shell does so before displaying the primary prompt.
If this variable is unset, or set to a value that is not a number
greater than or equal to zero, the shell disables mail checking.
- MAILPATH
-
A colon-separated list of file names to be checked for mail.
The message to be printed when mail arrives in a particular file
may be specified by separating the file name from the message with a `?'.
When used in the text of the message, $_ expands to the name of
the current mailfile.
Example:
-
MAILPATH=aq/var/mail/bfox?"You have mail":~/shell-mail?"$_ has mail!"aq
Bash
supplies a default value for this variable, but the location of the user
mail files that it uses is system dependent (e.g., /var/mail/$USER).
- OPTERR
-
If set to the value 1,
bash
displays error messages generated by the
getopts
builtin command (see
SHELL BUILTIN COMMANDS
below).
OPTERR
is initialized to 1 each time the shell is invoked or a shell
script is executed.
- PATH
-
The search path for commands. It
is a colon-separated list of directories in which
the shell looks for commands (see
COMMAND EXECUTION
below).
A zero-length (null) directory name in the value of PATH indicates the
current directory.
A null directory name may appear as two adjacent colons, or as an initial
or trailing colon.
The default path is system-dependent,
and is set by the administrator who installs
bash.
A common value is
/usr/gnu/bin:/usr/local/bin:/usr/ucb:/bin:/usr/bin.
- POSIXLY_CORRECT
-
If this variable is in the environment when bash starts, the shell
enters posix mode before reading the startup files, as if the
--posix
invocation option had been supplied. If it is set while the shell is
running, bash enables posix mode, as if the command
set -o posix
had been executed.
- PROMPT_COMMAND
-
If set, the value is executed as a command prior to issuing each primary
prompt.
- PS1
-
The value of this parameter is expanded (see
PROMPTING
below) and used as the primary prompt string. The default value is
``\s-\v\$ ''.
- PS2
-
The value of this parameter is expanded as with
PS1
and used as the secondary prompt string. The default is
``> ''.
- PS3
-
The value of this parameter is used as the prompt for the
select
command (see
SHELL GRAMMAR
above).
- PS4
-
The value of this parameter is expanded as with
PS1
and the value is printed before each command
bash
displays during an execution trace. The first character of
PS4
is replicated multiple times, as necessary, to indicate multiple
levels of indirection. The default is ``+ ''.
- SHELL
-
The full pathname to the shell is kept in this environment variable.
If it is not set when the shell starts,
bash
assigns to it the full pathname of the current user's login shell.
- TIMEFORMAT
-
The value of this parameter is used as a format string specifying
how the timing information for pipelines prefixed with the
time
reserved word should be displayed.
The % character introduces an escape sequence that is
expanded to a time value or other information.
The escape sequences and their meanings are as follows; the
braces denote optional portions.
-
- %%
-
A literal %.
- %[p][l]R
-
The elapsed time in seconds.
- %[p][l]U
-
The number of CPU seconds spent in user mode.
- %[p][l]S
-
The number of CPU seconds spent in system mode.
- %P
-
The CPU percentage, computed as (%U + %S) / %R.
-
The optional p is a digit specifying the precision,
the number of fractional digits after a decimal point.
A value of 0 causes no decimal point or fraction to be output.
At most three places after the decimal point may be specified;
values of p greater than 3 are changed to 3.
If p is not specified, the value 3 is used.
-
The optional l specifies a longer format, including
minutes, of the form MMmSS.FFs.
The value of p determines whether or not the fraction is
included.
-
If this variable is not set, bash acts as if it had the
value $aq\nreal\t%3lR\nuser\t%3lU\nsys %3lSaq.
If the value is null, no timing information is displayed.
A trailing newline is added when the format string is displayed.
- TMOUT
-
If set to a value greater than zero, TMOUT is treated as the
default timeout for the read builtin.
The select command terminates if input does not arrive
after TMOUT seconds when input is coming from a terminal.
In an interactive shell, the value is interpreted as the
number of seconds to wait for input after issuing the primary prompt.
Bash
terminates after waiting for that number of seconds if input does
not arrive.
- TMPDIR
-
If set, Bash uses its value as the name of a directory in which
Bash creates temporary files for the shell's use.
- auto_resume
-
This variable controls how the shell interacts with the user and
job control. If this variable is set, single word simple
commands without redirections are treated as candidates for resumption
of an existing stopped job. There is no ambiguity allowed; if there is
more than one job beginning with the string typed, the job most recently
accessed is selected. The
name
of a stopped job, in this context, is the command line used to
start it.
If set to the value
exact,
the string supplied must match the name of a stopped job exactly;
if set to
substring,
the string supplied needs to match a substring of the name of a
stopped job. The
substring
value provides functionality analogous to the
%?
job identifier (see
JOB CONTROL
below). If set to any other value, the supplied string must
be a prefix of a stopped job's name; this provides functionality
analogous to the %string job identifier.
- histchars
-
The two or three characters which control history expansion
and tokenization (see
HISTORY EXPANSION
below). The first character is the history expansion character,
the character which signals the start of a history
expansion, normally `!'.
The second character is the quick substitution
character, which is used as shorthand for re-running the previous
command entered, substituting one string for another in the command.
The default is `^'.
The optional third character is the character
which indicates that the remainder of the line is a comment when found
as the first character of a word, normally `#'. The history
comment character causes history substitution to be skipped for the
remaining words on the line. It does not necessarily cause the shell
parser to treat the rest of the line as a comment.
Arrays
Bash
provides one-dimensional array variables. Any variable may be used as
an array; the
declare
builtin will explicitly declare an array. There is no maximum
limit on the size of an array, nor any requirement that members
be indexed or assigned contiguously. Arrays are indexed using
integers and are zero-based.
An array is created automatically if any variable is assigned to using
the syntax name[subscript]=value. The
subscript
is treated as an arithmetic expression that must evaluate to a number
greater than or equal to zero. To explicitly declare an array, use
declare -a name
(see
SHELL BUILTIN COMMANDS
below).
declare -a name[subscript]
is also accepted; the subscript is ignored. Attributes may be
specified for an array variable using the
declare
and
readonly
builtins. Each attribute applies to all members of an array.
Arrays are assigned to using compound assignments of the form
name=(value1 ... valuen), where each
value is of the form [subscript]=string. Only
string is required. If
the optional brackets and subscript are supplied, that index is assigned to;
otherwise the index of the element assigned is the last index assigned
to by the statement plus one. Indexing starts at zero.
This syntax is also accepted by the
declare
builtin. Individual array elements may be assigned to using the
name[subscript]=value syntax introduced above.
Any element of an array may be referenced using
${name[subscript]}. The braces are required to avoid
conflicts with pathname expansion. If
subscript is @ or *, the word expands to
all members of name. These subscripts differ only when the
word appears within double quotes. If the word is double-quoted,
${name[*]} expands to a single
word with the value of each array member separated by the first
character of the
IFS
special variable, and ${name[@]} expands each element of
name to a separate word. When there are no array members,
${name[@]} expands to nothing.
If the double-quoted expansion occurs within a word, the expansion of
the first parameter is joined with the beginning part of the original
word, and the expansion of the last parameter is joined with the last
part of the original word.
This is analogous to the expansion
of the special parameters * and @ (see
Special Parameters
above). ${#name[subscript]} expands to the length of
${name[subscript]}. If subscript is * or
@, the expansion is the number of elements in the array.
Referencing an array variable without a subscript is equivalent to
referencing element zero.
The
unset
builtin is used to destroy arrays. unset name[subscript]
destroys the array element at index subscript.
Care must be taken to avoid unwanted side effects caused by filename
generation.
unset name, where name is an array, or
unset name[subscript], where
subscript is * or @, removes the entire array.
The
declare,
local,
and
readonly
builtins each accept a
-a
option to specify an array. The
read
builtin accepts a
-a
option to assign a list of words read from the standard input
to an array. The
set
and
declare
builtins display array values in a way that allows them to be
reused as assignments.
EXPANSION
Expansion is performed on the command line after it has been split into
words. There are seven kinds of expansion performed:
brace expansion,
tilde expansion,
parameter and variable expansion,
command substitution,
arithmetic expansion,
word splitting,
and
pathname expansion.
The order of expansions is: brace expansion, tilde expansion,
parameter, variable and arithmetic expansion and
command substitution
(done in a left-to-right fashion), word splitting, and pathname
expansion.
On systems that can support it, there is an additional expansion
available: process substitution.
Only brace expansion, word splitting, and pathname expansion
can change the number of words of the expansion; other expansions
expand a single word to a single word.
The only exceptions to this are the expansions of
"$@" and "${name[@]}"
as explained above (see
PARAMETERS).
Brace Expansion
Brace expansion
is a mechanism by which arbitrary strings
may be generated. This mechanism is similar to
pathname expansion, but the filenames generated
need not exist. Patterns to be brace expanded take
the form of an optional
preamble,
followed by either a series of comma-separated strings or
a sequence expression between a pair of braces, followed by
an optional
postscript.
The preamble is prefixed to each string contained
within the braces, and the postscript is then appended
to each resulting string, expanding left to right.
Brace expansions may be nested. The results of each expanded
string are not sorted; left to right order is preserved.
For example, a{d,c,b}e expands into `ade ace abe'.
A sequence expression takes the form {x..y},
where x and y are either integers or single characters.
When integers are supplied, the expression expands to each number between
x and y, inclusive.
When characters are supplied, the expression expands to each character
lexicographically between x and y, inclusive. Note that
both x and y must be of the same type.
Brace expansion is performed before any other expansions,
and any characters special to other expansions are preserved
in the result. It is strictly textual.
Bash
does not apply any syntactic interpretation to the context of the
expansion or the text between the braces.
A correctly-formed brace expansion must contain unquoted opening
and closing braces, and at least one unquoted comma or a valid
sequence expression.
Any incorrectly formed brace expansion is left unchanged.
A { or , may be quoted with a backslash to prevent its
being considered part of a brace expression.
To avoid conflicts with parameter expansion, the string ${
is not considered eligible for brace expansion.
This construct is typically used as shorthand when the common
prefix of the strings to be generated is longer than in the
above example:
-
mkdir /usr/local/src/bash/{old,new,dist,bugs}
or
-
chown root /usr/{ucb/{ex,edit},lib/{ex?.?*,how_ex}}
Brace expansion introduces a slight incompatibility with
historical versions of
sh.
sh
does not treat opening or closing braces specially when they
appear as part of a word, and preserves them in the output.
Bash
removes braces from words as a consequence of brace
expansion. For example, a word entered to
sh
as file{1,2}
appears identically in the output. The same word is
output as
file1 file2
after expansion by
bash.
If strict compatibility with
sh
is desired, start
bash
with the
+B
option or disable brace expansion with the
+B
option to the
set
command (see
SHELL BUILTIN COMMANDS
below).
Tilde Expansion
If a word begins with an unquoted tilde character (`~'), all of
the characters preceding the first unquoted slash (or all characters,
if there is no unquoted slash) are considered a tilde-prefix.
If none of the characters in the tilde-prefix are quoted, the
characters in the tilde-prefix following the tilde are treated as a
possible login name.
If this login name is the null string, the tilde is replaced with the
value of the shell parameter
HOME.
If
HOME
is unset, the home directory of the user executing the shell is
substituted instead.
Otherwise, the tilde-prefix is replaced with the home directory
associated with the specified login name.
If the tilde-prefix is a `~+', the value of the shell variable
PWD
replaces the tilde-prefix.
If the tilde-prefix is a `~-', the value of the shell variable
OLDPWD,
if it is set, is substituted.
If the characters following the tilde in the tilde-prefix consist
of a number N, optionally prefixed
by a `+' or a `-', the tilde-prefix is replaced with the corresponding
element from the directory stack, as it would be displayed by the
dirs
builtin invoked with the tilde-prefix as an argument.
If the characters following the tilde in the tilde-prefix consist of a
number without a leading `+' or `-', `+' is assumed.
If the login name is invalid, or the tilde expansion fails, the word
is unchanged.
Each variable assignment is checked for unquoted tilde-prefixes immediately
following a
:
or the first
=.
In these cases, tilde expansion is also performed.
Consequently, one may use file names with tildes in assignments to
PATH,
MAILPATH,
and
CDPATH,
and the shell assigns the expanded value.
Parameter Expansion
The `$' character introduces parameter expansion,
command substitution, or arithmetic expansion. The parameter name
or symbol to be expanded may be enclosed in braces, which
are optional but serve to protect the variable to be expanded from
characters immediately following it which could be
interpreted as part of the name.
When braces are used, the matching ending brace is the first `}'
not escaped by a backslash or within a quoted string, and not within an
embedded arithmetic expansion, command substitution, or parameter
expansion.
- ${parameter}
-
The value of parameter is substituted. The braces are required
when
parameter
is a positional parameter with more than one digit,
or when
parameter
is followed by a character which is not to be
interpreted as part of its name.
If the first character of parameter is an exclamation point,
a level of variable indirection is introduced.
Bash uses the value of the variable formed from the rest of
parameter as the name of the variable; this variable is then
expanded and that value is used in the rest of the substitution, rather
than the value of parameter itself.
This is known as indirect expansion.
The exceptions to this are the expansions of ${!prefix*} and
${!name[@]} described below.
The exclamation point must immediately follow the left brace in order to
introduce indirection.
In each of the cases below, word is subject to tilde expansion,
parameter expansion, command substitution, and arithmetic expansion.
When not performing substring expansion, bash tests for a parameter
that is unset or null; omitting the colon results in a test only for a
parameter that is unset.
- ${parameter:-word}
-
Use Default Values. If
parameter
is unset or null, the expansion of
word
is substituted. Otherwise, the value of
parameter
is substituted.
- ${parameter:=word}
-
Assign Default Values.
If
parameter
is unset or null, the expansion of
word
is assigned to
parameter.
The value of
parameter
is then substituted. Positional parameters and special parameters may
not be assigned to in this way.
- ${parameter:?word}
-
Display Error if Null or Unset.
If
parameter
is null or unset, the expansion of word (or a message to that effect
if
word
is not present) is written to the standard error and the shell, if it
is not interactive, exits. Otherwise, the value of parameter is
substituted.
- ${parameter:+word}
-
Use Alternate Value.
If
parameter
is null or unset, nothing is substituted, otherwise the expansion of
word
is substituted.
- ${parameter:offset}
-
- ${parameter:offset:length}
-
Substring Expansion.
Expands to up to length characters of parameter
starting at the character specified by offset.
If length is omitted, expands to the substring of
parameter starting at the character specified by offset.
length and offset are arithmetic expressions (see
ARITHMETIC EVALUATION
below).
length must evaluate to a number greater than or equal to zero.
If offset evaluates to a number less than zero, the value
is used as an offset from the end of the value of parameter.
If parameter is @, the result is length positional
parameters beginning at offset.
If parameter is an array name indexed by @ or *,
the result is the length
members of the array beginning with ${parameter[offset]}.
A negative offset is taken relative to one greater than the maximum
index of the specified array.
Note that a negative offset must be separated from the colon by at least
one space to avoid being confused with the :- expansion.
Substring indexing is zero-based unless the positional parameters
are used, in which case the indexing starts at 1.
- ${!prefix*}
-
- ${!prefix@}
-
Expands to the names of variables whose names begin with prefix,
separated by the first character of the
IFS
special variable.
- ${!name[@]}
-
- ${!name[*]}
-
If name is an array variable, expands to the list of array indices
(keys) assigned in name.
If name is not an array, expands to 0 if name is set and null
otherwise.
When @ is used and the expansion appears within double quotes, each
key expands to a separate word.
- ${#parameter}
-
The length in characters of the value of parameter is substituted.
If
parameter
is
*
or
@,
the value substituted is the number of positional parameters.
If
parameter
is an array name subscripted by
*
or
@,
the value substituted is the number of elements in the array.
- ${parameter#word}
-
- ${parameter##word}
-
The
word
is expanded to produce a pattern just as in pathname
expansion. If the pattern matches the beginning of
the value of
parameter,
then the result of the expansion is the expanded value of
parameter
with the shortest matching pattern (the ``#'' case) or the
longest matching pattern (the ``##'' case) deleted.
If
parameter
is
@
or
*,
the pattern removal operation is applied to each positional
parameter in turn, and the expansion is the resultant list.
If
parameter
is an array variable subscripted with
@
or
*,
the pattern removal operation is applied to each member of the
array in turn, and the expansion is the resultant list.
- ${parameter%word}
-
- ${parameter%%word}
-
The word is expanded to produce a pattern just as in
pathname expansion.
If the pattern matches a trailing portion of the expanded value of
parameter,
then the result of the expansion is the expanded value of
parameter
with the shortest matching pattern (the ``%'' case) or the
longest matching pattern (the ``%%'' case) deleted.
If
parameter
is
@
or
*,
the pattern removal operation is applied to each positional
parameter in turn, and the expansion is the resultant list.
If
parameter
is an array variable subscripted with
@
or
*,
the pattern removal operation is applied to each member of the
array in turn, and the expansion is the resultant list.
- ${parameter/pattern/string}
-
The pattern is expanded to produce a pattern just as in
pathname expansion.
Parameter is expanded and the longest match of pattern
against its value is replaced with string.
If Ipattern begins with /, all matches of pattern are
replaced with string. Normally only the first match is replaced.
If pattern begins with #, it must match at the beginning
of the expanded value of parameter.
If pattern begins with %, it must match at the end
of the expanded value of parameter.
If string is null, matches of pattern are deleted
and the / following pattern may be omitted.
If
parameter
is
@
or
*,
the substitution operation is applied to each positional
parameter in turn, and the expansion is the resultant list.
If
parameter
is an array variable subscripted with
@
or
*,
the substitution operation is applied to each member of the
array in turn, and the expansion is the resultant list.
Command Substitution
Command substitution allows the output of a command to replace
the command name. There are two forms:
-
$(command)
or
-
`command`
Bash
performs the expansion by executing command and
replacing the command substitution with the standard output of the
command, with any trailing newlines deleted.
Embedded newlines are not deleted, but they may be removed during
word splitting.
The command substitution $(cat file) can be replaced by
the equivalent but faster $(< file).
When the old-style backquote form of substitution is used,
backslash retains its literal meaning except when followed by
$,
`,
or
\.
The first backquote not preceded by a backslash terminates the
command substitution.
When using the $(command) form, all characters between the
parentheses make up the command; none are treated specially.
Command substitutions may be nested. To nest when using the backquoted form,
escape the inner backquotes with backslashes.
If the substitution appears within double quotes, word splitting and
pathname expansion are not performed on the results.
Arithmetic Expansion
Arithmetic expansion allows the evaluation of an arithmetic expression
and the substitution of the result. The format for arithmetic expansion is:
-
$((expression))
The
expression
is treated as if it were within double quotes, but a double quote
inside the parentheses is not treated specially.
All tokens in the expression undergo parameter expansion, string
expansion, command substitution, and quote removal.
Arithmetic expansions may be nested.
The evaluation is performed according to the rules listed below under
ARITHMETIC EVALUATION.
If
expression
is invalid,
bash
prints a message indicating failure and no substitution occurs.
Process Substitution
Process substitution is supported on systems that support named
pipes (FIFOs) or the /dev/fd method of naming open files.
It takes the form of
<(list)
or
>(list).
The process list is run with its input or output connected to a
FIFO or some file in /dev/fd. The name of this file is
passed as an argument to the current command as the result of the
expansion. If the >(list) form is used, writing to
the file will provide input for list. If the
<(list) form is used, the file passed as an
argument should be read to obtain the output of list.
When available, process substitution is performed
simultaneously with parameter and variable expansion,
command substitution,
and arithmetic expansion.
Word Splitting
The shell scans the results of
parameter expansion,
command substitution,
and
arithmetic expansion
that did not occur within double quotes for
word splitting.
The shell treats each character of
IFS
as a delimiter, and splits the results of the other
expansions into words on these characters. If
IFS
is unset, or its
value is exactly
<space><tab><newline>,
the default, then
any sequence of
IFS
characters serves to delimit words. If
IFS
has a value other than the default, then sequences of
the whitespace characters
space
and
tab
are ignored at the beginning and end of the
word, as long as the whitespace character is in the
value of
IFS
(an
IFS
whitespace character).
Any character in
IFS
that is not
IFS
whitespace, along with any adjacent
IFS
whitespace characters, delimits a field.
A sequence of
IFS
whitespace characters is also treated as a delimiter.
If the value of
IFS
is null, no word splitting occurs.
Explicit null arguments ("" or aqaq) are retained.
Unquoted implicit null arguments, resulting from the expansion of
parameters that have no values, are removed.
If a parameter with no value is expanded within double quotes, a
null argument results and is retained.
Note that if no expansion occurs, no splitting
is performed.
Pathname Expansion
After word splitting,
unless the
-f
option has been set,
bash
scans each word for the characters
*,
?,
and
[.
If one of these characters appears, then the word is
regarded as a
pattern,
and replaced with an alphabetically sorted list of
file names matching the pattern.
If no matching file names are found,
and the shell option
nullglob
is disabled, the word is left unchanged.
If the
nullglob
option is set, and no matches are found,
the word is removed.
If the
failglob
shell option is set, and no matches are found, an error message
is printed and the command is not executed.
If the shell option
nocaseglob
is enabled, the match is performed without regard to the case
of alphabetic characters.
When a pattern is used for pathname expansion,
the character
``.''
at the start of a name or immediately following a slash
must be matched explicitly, unless the shell option
dotglob
is set.
When matching a pathname, the slash character must always be
matched explicitly.
In other cases, the
``.''
character is not treated specially.
See the description of
shopt
below under
SHELL BUILTIN COMMANDS
for a description of the
nocaseglob,
nullglob,
failglob,
and
dotglob
shell options.
The
GLOBIGNORE
shell variable may be used to restrict the set of file names matching a
pattern.
If
GLOBIGNORE
is set, each matching file name that also matches one of the patterns in
GLOBIGNORE
is removed from the list of matches.
The file names
``.''
and
``..''
are always ignored when
GLOBIGNORE
is set and not null. However, setting
GLOBIGNORE
to a non-null value has the effect of enabling the
dotglob
shell option, so all other file names beginning with a
``.''
will match.
To get the old behavior of ignoring file names beginning with a
``.'',
make
``.*''
one of the patterns in
GLOBIGNORE.
The
dotglob
option is disabled when
GLOBIGNORE
is unset.
Pattern Matching
Any character that appears in a pattern, other than the special pattern
characters described below, matches itself. The NUL character may not
occur in a pattern. A backslash escapes the following character; the
escaping backslash is discarded when matching.
The special pattern characters must be quoted if
they are to be matched literally.
The special pattern characters have the following meanings:
- *
-
Matches any string, including the null string.
- ?
-
Matches any single character.
- [...]
-
Matches any one of the enclosed characters. A pair of characters
separated by a hyphen denotes a
range expression;
any character that sorts between those two characters, inclusive,
using the current locale's collating sequence and character set,
is matched. If the first character following the
[
is a
!
or a
^
then any character not enclosed is matched.
The sorting order of characters in range expressions is determined by
the current locale and the value of the LC_COLLATE shell variable,
if set.
A
-
may be matched by including it as the first or last character
in the set.
A
]
may be matched by including it as the first character
in the set.
Within
[
and
],
character classes can be specified using the syntax
[:class:], where class is one of the
following classes defined in the POSIX standard:
-
alnum alpha ascii blank cntrl digit graph lower print punct space upper word xdigit
A character class matches any character belonging to that class.
The word character class matches letters, digits, and the character _.
Within
[
and
],
an equivalence class can be specified using the syntax
[=c=], which matches all characters with the
same collation weight (as defined by the current locale) as
the character c.
Within
[
and
],
the syntax [.symbol.] matches the collating symbol
symbol.
If the extglob shell option is enabled using the shopt
builtin, several extended pattern matching operators are recognized.
In the following description, a pattern-list is a list of one
or more patterns separated by a |.
Composite patterns may be formed using one or more of the following
sub-patterns:
-
- ?(pattern-list)
-
Matches zero or one occurrence of the given patterns
- *(pattern-list)
-
Matches zero or more occurrences of the given patterns
- +(pattern-list)
-
Matches one or more occurrences of the given patterns
- @(pattern-list)
-
Matches one of the given patterns
- !(pattern-list)
-
Matches anything except one of the given patterns
Quote Removal
After the preceding expansions, all unquoted occurrences of the
characters
\,
aq,
and " that did not result from one of the above
expansions are removed.
REDIRECTION
Before a command is executed, its input and output
may be
redirected
using a special notation interpreted by the shell.
Redirection may also be used to open and close files for the
current shell execution environment. The following redirection
operators may precede or appear anywhere within a
simple command
or may follow a
command.
Redirections are processed in the order they appear, from
left to right.
In the following descriptions, if the file descriptor number is
omitted, and the first character of the redirection operator is
<,
the redirection refers to the standard input (file descriptor
0). If the first character of the redirection operator is
>,
the redirection refers to the standard output (file descriptor
1).
The word following the redirection operator in the following
descriptions, unless otherwise noted, is subjected to brace expansion,
tilde expansion, parameter expansion, command substitution, arithmetic
expansion, quote removal, pathname expansion, and word splitting.
If it expands to more than one word,
bash
reports an error.
Note that the order of redirections is significant. For example,
the command
-
ls > dirlist 2>&1
directs both standard output and standard error to the file
dirlist,
while the command
-
ls 2>&1 > dirlist
directs only the standard output to file
dirlist,
because the standard error was duplicated as standard output
before the standard output was redirected to
dirlist.
Bash handles several filenames specially when they are used in
redirections, as described in the following table:
-
- /dev/fd/fd
-
If fd is a valid integer, file descriptor fd is duplicated.
- /dev/stdin
-
File descriptor 0 is duplicated.
- /dev/stdout
-
File descriptor 1 is duplicated.
- /dev/stderr
-
File descriptor 2 is duplicated.
- /dev/tcp/host/port
-
If host is a valid hostname or Internet address, and port
is an integer port number or service name, bash attempts to open
a TCP connection to the corresponding socket.
- /dev/udp/host/port
-
If host is a valid hostname or Internet address, and port
is an integer port number or service name, bash attempts to open
a UDP connection to the corresponding socket.
A failure to open or create a file causes the redirection to fail.
Redirections using file descriptors greater than 9 should be used with
care, as they may conflict with file descriptors the shell uses
internally.
Redirecting Input
Redirection of input causes the file whose name results from
the expansion of
word
to be opened for reading on file descriptor
n,
or the standard input (file descriptor 0) if
n
is not specified.
The general format for redirecting input is:
-
[n]<word
Redirecting Output
Redirection of output causes the file whose name results from
the expansion of
word
to be opened for writing on file descriptor
n,
or the standard output (file descriptor 1) if
n
is not specified. If the file does not exist it is created;
if it does exist it is truncated to zero size.
The general format for redirecting output is:
-
[n]>word
If the redirection operator is
>,
and the
noclobber
option to the
set
builtin has been enabled, the redirection will fail if the file
whose name results from the expansion of word exists and is
a regular file.
If the redirection operator is
>|,
or the redirection operator is
>
and the
noclobber
option to the
set
builtin command is not enabled, the redirection is attempted even
if the file named by word exists.
Appending Redirected Output
Redirection of output in this fashion
causes the file whose name results from
the expansion of
word
to be opened for appending on file descriptor
n,
or the standard output (file descriptor 1) if
n
is not specified. If the file does not exist it is created.
The general format for appending output is:
-
[n]>>word
Redirecting Standard Output and Standard Error
Bash
allows both the
standard output (file descriptor 1) and
the standard error output (file descriptor 2)
to be redirected to the file whose name is the
expansion of
word
with this construct.
There are two formats for redirecting standard output and
standard error:
-
&>word
and
-
>&word
Of the two forms, the first is preferred.
This is semantically equivalent to
-
>word 2>&1
Here Documents
This type of redirection instructs the shell to read input from the
current source until a line containing only
word
(with no trailing blanks)
is seen. All of
the lines read up to that point are then used as the standard
input for a command.
The format of here-documents is:
-
<<[-]word
here-document
delimiter
No parameter expansion, command substitution, arithmetic expansion,
or pathname expansion is performed on
word.
If any characters in
word
are quoted, the
delimiter
is the result of quote removal on
word,
and the lines in the here-document are not expanded.
If word is unquoted,
all lines of the here-document are subjected to parameter expansion,
command substitution, and arithmetic expansion. In the latter
case, the character sequence
\<newline>
is ignored, and
\
must be used to quote the characters
\,
$,
and
`.
If the redirection operator is
<<-,
then all leading tab characters are stripped from input lines and the
line containing
delimiter.
This allows
here-documents within shell scripts to be indented in a
natural fashion.
Here Strings
A variant of here documents, the format is:
-
<<<word
The word is expanded and supplied to the command on its standard
input.
Duplicating File Descriptors
The redirection operator
-
[n]<&word
is used to duplicate input file descriptors.
If
word
expands to one or more digits, the file descriptor denoted by
n
is made to be a copy of that file descriptor.
If the digits in
word
do not specify a file descriptor open for input, a redirection error occurs.
If
word
evaluates to
-,
file descriptor
n
is closed. If
n
is not specified, the standard input (file descriptor 0) is used.
The operator
-
[n]>&word
is used similarly to duplicate output file descriptors. If
n
is not specified, the standard output (file descriptor 1) is used.
If the digits in
word
do not specify a file descriptor open for output, a redirection error occurs.
As a special case, if n is omitted, and word does not
expand to one or more digits, the standard output and standard
error are redirected as described previously.
Moving File Descriptors
The redirection operator
-
[n]<&digit-
moves the file descriptor digit to file descriptor
n,
or the standard input (file descriptor 0) if n is not specified.
digit is closed after being duplicated to n.
Similarly, the redirection operator
-
[n]>&digit-
moves the file descriptor digit to file descriptor
n,
or the standard output (file descriptor 1) if n is not specified.
Opening File Descriptors for Reading and Writing
The redirection operator
-
[n]<>word
causes the file whose name is the expansion of
word
to be opened for both reading and writing on file descriptor
n,
or on file descriptor 0 if
n
is not specified. If the file does not exist, it is created.
ALIASES
Aliases allow a string to be substituted for a word when it is used
as the first word of a simple command.
The shell maintains a list of aliases that may be set and unset with the
alias
and
unalias
builtin commands (see
SHELL BUILTIN COMMANDS
below).
The first word of each simple command, if unquoted,
is checked to see if it has an
alias. If so, that word is replaced by the text of the alias.
The characters /, $, `, and = and
any of the shell metacharacters or quoting characters
listed above may not appear in an alias name.
The replacement text may contain any valid shell input,
including shell metacharacters.
The first word of the replacement text is tested
for aliases, but a word that is identical to an alias being expanded
is not expanded a second time.
This means that one may alias
ls
to
ls -F,
for instance, and
bash
does not try to recursively expand the replacement text.
If the last character of the alias value is a
blank,
then the next command
word following the alias is also checked for alias expansion.
Aliases are created and listed with the
alias
command, and removed with the
unalias
command.
There is no mechanism for using arguments in the replacement text.
If arguments are needed, a shell function should be used (see
FUNCTIONS
below).
Aliases are not expanded when the shell is not interactive, unless
the
expand_aliases
shell option is set using
shopt
(see the description of
shopt
under
SHELL BUILTIN COMMANDS
below).
The rules concerning the definition and use of aliases are
somewhat confusing.
Bash
always reads at least one complete line
of input before executing any
of the commands on that line. Aliases are expanded when a
command is read, not when it is executed. Therefore, an
alias definition appearing on the same line as another
command does not take effect until the next line of input is read.
The commands following the alias definition
on that line are not affected by the new alias.
This behavior is also an issue when functions are executed.
Aliases are expanded when a function definition is read,
not when the function is executed, because a function definition
is itself a compound command. As a consequence, aliases
defined in a function are not available until after that
function is executed. To be safe, always put
alias definitions on a separate line, and do not use
alias
in compound commands.
For almost every purpose, aliases are superseded by
shell functions.
FUNCTIONS
A shell function, defined as described above under
SHELL GRAMMAR,
stores a series of commands for later execution.
When the name of a shell function is used as a simple command name,
the list of commands associated with that function name is executed.
Functions are executed in the context of the
current shell; no new process is created to interpret
them (contrast this with the execution of a shell script).
When a function is executed, the arguments to the
function become the positional parameters
during its execution.
The special parameter
#
is updated to reflect the change. Special parameter 0
is unchanged.
The first element of the
FUNCNAME
variable is set to the name of the function while the function
is executing.
All other aspects of the shell execution
environment are identical between a function and its caller
with the exception that the
DEBUG
and
RETURN
traps (see the description of the
trap
builtin under
SHELL BUILTIN COMMANDS
below) are not inherited unless the function has been given the
trace attribute (see the description of the
declare
builtin below) or the
-o functrace shell option has been enabled with
the set builtin
(in which case all functions inherit the DEBUG and RETURN traps).
Variables local to the function may be declared with the
local
builtin command. Ordinarily, variables and their values
are shared between the function and its caller.
If the builtin command
return
is executed in a function, the function completes and
execution resumes with the next command after the function
call.
Any command associated with the RETURN trap is executed
before execution resumes.
When a function completes, the values of the
positional parameters and the special parameter
#
are restored to the values they had prior to the function's
execution.
Function names and definitions may be listed with the
-f
option to the
declare
or
typeset
builtin commands. The
-F
option to
declare
or
typeset
will list the function names only
(and optionally the source file and line number, if the extdebug
shell option is enabled).
Functions may be exported so that subshells
automatically have them defined with the
-f
option to the
export
builtin.
A function definition may be deleted using the -f option to
the
unset
builtin.
Note that shell functions and variables with the same name may result
in multiple identically-named entries in the environment passed to the
shell's children.
Care should be taken in cases where this may cause a problem.
Functions may be recursive. No limit is imposed on the number
of recursive calls.
ARITHMETIC EVALUATION
The shell allows arithmetic expressions to be evaluated, under
certain circumstances (see the let and declare builtin
commands and Arithmetic Expansion).
Evaluation is done in fixed-width integers with no check for overflow,
though division by 0 is trapped and flagged as an error.
The operators and their precedence, associativity, and values
are the same as in the C language.
The following list of operators is grouped into levels of
equal-precedence operators.
The levels are listed in order of decreasing precedence.
- id++ id--
-
variable post-increment and post-decrement
- ++id --id
-
variable pre-increment and pre-decrement
- - +
-
unary minus and plus
- ! ~
-
logical and bitwise negation
- **
-
exponentiation
- * / %
-
multiplication, division, remainder
- + -
-
addition, subtraction
- << >>
-
left and right bitwise shifts
- <= >= < >
-
comparison
- == !=
-
equality and inequality
- &
-
bitwise AND
- ^
-
bitwise exclusive OR
- |
-
bitwise OR
- &&
-
logical AND
- ||
-
logical OR
- expr?expr:expr
-
conditional operator
- = *= /= %= += -= <<= >>= &= ^= |=
-
assignment
- expr1 , expr2
-
comma
Shell variables are allowed as operands; parameter expansion is
performed before the expression is evaluated.
Within an expression, shell variables may also be referenced by name
without using the parameter expansion syntax.
A shell variable that is null or unset evaluates to 0 when referenced
by name without using the parameter expansion syntax.
The value of a variable is evaluated as an arithmetic expression
when it is referenced, or when a variable which has been given the
integer attribute using declare -i is assigned a value.
A null value evaluates to 0.
A shell variable need not have its integer attribute
turned on to be used in an expression.
Constants with a leading 0 are interpreted as octal numbers.
A leading 0x or 0X denotes hexadecimal.
Otherwise, numbers take the form [base#]n, where base
is a decimal number between 2 and 64 representing the arithmetic
base, and n is a number in that base.
If base# is omitted, then base 10 is used.
The digits greater than 9 are represented by the lowercase letters,
the uppercase letters, @, and _, in that order.
If base is less than or equal to 36, lowercase and uppercase
letters may be used interchangeably to represent numbers between 10
and 35.
Operators are evaluated in order of precedence. Sub-expressions in
parentheses are evaluated first and may override the precedence
rules above.
CONDITIONAL EXPRESSIONS
Conditional expressions are used by the [[ compound command and
the test and [ builtin commands to test file attributes
and perform string and arithmetic comparisons.
Expressions are formed from the following unary or binary primaries.
If any file argument to one of the primaries is of the form
/dev/fd/n, then file descriptor n is checked.
If the file argument to one of the primaries is one of
/dev/stdin, /dev/stdout, or /dev/stderr, file
descriptor 0, 1, or 2, respectively, is checked.
Unless otherwise specified, primaries that operate on files follow symbolic
links and operate on the target of the link, rather than the link itself.
- -a file
-
True if file exists.
- -b file
-
True if file exists and is a block special file.
- -c file
-
True if file exists and is a character special file.
- -d file
-
True if file exists and is a directory.
- -e file
-
True if file exists.
- -f file
-
True if file exists and is a regular file.
- -g file
-
True if file exists and is set-group-id.
- -h file
-
True if file exists and is a symbolic link.
- -k file
-
True if file exists and its ``sticky'' bit is set.
- -p file
-
True if file exists and is a named pipe (FIFO).
- -r file
-
True if file exists and is readable.
- -s file
-
True if file exists and has a size greater than zero.
- -t fd
-
True if file descriptor
fd
is open and refers to a terminal.
- -u file
-
True if file exists and its set-user-id bit is set.
- -w file
-
True if file exists and is writable.
- -x file
-
True if file exists and is executable.
- -O file
-
True if file exists and is owned by the effective user id.
- -G file
-
True if file exists and is owned by the effective group id.
- -L file
-
True if file exists and is a symbolic link.
- -S file
-
True if file exists and is a socket.
- -N file
-
True if file exists and has been modified since it was last read.
- file1 -nt file2
-
True if file1 is newer (according to modification date) than file2,
or if file1 exists and file2 does not.
- file1 -ot file2
-
True if file1 is older than file2, or if file2 exists
and file1 does not.
- file1 -ef file2
-
True if file1 and file2 refer to the same device and
inode numbers.
- -o optname
-
True if shell option
optname
is enabled.
See the list of options under the description of the
-o
option to the
set
builtin below.
- -z string
-
True if the length of string is zero.
- string
-
- -n string
-
True if the length of
string
is non-zero.
- string1 == string2
-
True if the strings are equal. = may be used in place of
== for strict POSIX compliance.
- string1 != string2
-
True if the strings are not equal.
- string1 < string2
-
True if string1 sorts before string2 lexicographically
in the current locale.
- string1 > string2
-
True if string1 sorts after string2 lexicographically
in the current locale.
- arg1 OP arg2
-
OP
is one of
-eq,
-ne,
-lt,
-le,
-gt,
or
-ge.
These arithmetic binary operators return true if arg1
is equal to, not equal to, less than, less than or equal to,
greater than, or greater than or equal to arg2, respectively.
Arg1
and
arg2
may be positive or negative integers.
SIMPLE COMMAND EXPANSION
When a simple command is executed, the shell performs the following
expansions, assignments, and redirections, from left to right.
- 1.
-
The words that the parser has marked as variable assignments (those
preceding the command name) and redirections are saved for later
processing.
- 2.
-
The words that are not variable assignments or redirections are
expanded. If any words remain after expansion, the first word
is taken to be the name of the command and the remaining words are
the arguments.
- 3.
-
Redirections are performed as described above under
REDIRECTION.
- 4.
-
The text after the = in each variable assignment undergoes tilde
expansion, parameter expansion, command substitution, arithmetic expansion,
and quote removal before being assigned to the variable.
If no command name results, the variable assignments affect the current
shell environment. Otherwise, the variables are added to the environment
of the executed command and do not affect the current shell environment.
If any of the assignments attempts to assign a value to a readonly variable,
an error occurs, and the command exits with a non-zero status.
If no command name results, redirections are performed, but do not
affect the current shell environment. A redirection error causes the
command to exit with a non-zero status.
If there is a command name left after expansion, execution proceeds as
described below. Otherwise, the command exits. If one of the expansions
contained a command substitution, the exit status of the command is
the exit status of the last command substitution performed. If there
were no command substitutions, the command exits with a status of zero.
COMMAND EXECUTION
After a command has been split into words, if it results in a
simple command and an optional list of arguments, the following
actions are taken.
If the command name contains no slashes, the shell attempts to
locate it. If there exists a shell function by that name, that
function is invoked as described above in
FUNCTIONS.
If the name does not match a function, the shell searches for
it in the list of shell builtins. If a match is found, that
builtin is invoked.
If the name is neither a shell function nor a builtin,
and contains no slashes,
bash
searches each element of the
PATH
for a directory containing an executable file by that name.
Bash
uses a hash table to remember the full pathnames of executable
files (see
hash
under
SHELL BUILTIN COMMANDS
below).
A full search of the directories in
PATH
is performed only if the command is not found in the hash table.
If the search is unsuccessful, the shell prints an error
message and returns an exit status of 127.
If the search is successful, or if the command name contains
one or more slashes, the shell executes the named program in a
separate execution environment.
Argument 0 is set to the name given, and the remaining arguments
to the command are set to the arguments given, if any.
If this execution fails because the file is not in executable
format, and the file is not a directory, it is assumed to be
a shell script, a file
containing shell commands. A subshell is spawned to execute
it. This subshell reinitializes itself, so
that the effect is as if a new shell had been invoked
to handle the script, with the exception that the locations of
commands remembered by the parent (see
hash
below under
SHELL BUILTIN COMMANDS)
are retained by the child.
If the program is a file beginning with
#!,
the remainder of the first line specifies an interpreter
for the program. The shell executes the
specified interpreter on operating systems that do not
handle this executable format themselves. The arguments to the
interpreter consist of a single optional argument following the
interpreter name on the first line of the program, followed
by the name of the program, followed by the command
arguments, if any.
COMMAND EXECUTION ENVIRONMENT
The shell has an execution environment, which consists of the
following:
- *
-
open files inherited by the shell at invocation, as modified by
redirections supplied to the exec builtin
- *
-
the current working directory as set by cd, pushd, or
popd, or inherited by the shell at invocation
- *
-
the file creation mode mask as set by umask or inherited from
the shell's parent
- *
-
current traps set by trap
- *
-
shell parameters that are set by variable assignment or with set
or inherited from the shell's parent in the environment
- *
-
shell functions defined during execution or inherited from the shell's
parent in the environment
- *
-
options enabled at invocation (either by default or with command-line
arguments) or by set
- *
-
options enabled by shopt
- *
-
shell aliases defined with alias
- *
-
various process IDs, including those of background jobs, the value
of $$, and the value of $PPID
When a simple command other than a builtin or shell function
is to be executed, it
is invoked in a separate execution environment that consists of
the following. Unless otherwise noted, the values are inherited
from the shell.
- *
-
the shell's open files, plus any modifications and additions specified
by redirections to the command
- *
-
the current working directory
- *
-
the file creation mode mask
- *
-
shell variables and functions marked for export, along with variables
exported for the command, passed in the environment
- *
-
traps caught by the shell are reset to the values inherited from the
shell's parent, and traps ignored by the shell are ignored
A command invoked in this separate environment cannot affect the
shell's execution environment.
Command substitution, commands grouped with parentheses,
and asynchronous commands are invoked in a
subshell environment that is a duplicate of the shell environment,
except that traps caught by the shell are reset to the values
that the shell inherited from its parent at invocation. Builtin
commands that are invoked as part of a pipeline are also executed in a
subshell environment. Changes made to the subshell environment
cannot affect the shell's execution environment.
If a command is followed by a & and job control is not active, the
default standard input for the command is the empty file /dev/null.
Otherwise, the invoked command inherits the file descriptors of the calling
shell as modified by redirections.
ENVIRONMENT
When a program is invoked it is given an array of strings
called the
environment.
This is a list of
name-value pairs, of the form
name=value.
The shell provides several ways to manipulate the environment.
On invocation, the shell scans its own environment and
creates a parameter for each name found, automatically marking
it for
export
to child processes. Executed commands inherit the environment.
The
export
and
declare -x
commands allow parameters and functions to be added to and
deleted from the environment. If the value of a parameter
in the environment is modified, the new value becomes part
of the environment, replacing the old. The environment
inherited by any executed command consists of the shell's
initial environment, whose values may be modified in the shell,
less any pairs removed by the
unset
command, plus any additions via the
export
and
declare -x
commands.
The environment for any
simple command
or function may be augmented temporarily by prefixing it with
parameter assignments, as described above in
PARAMETERS.
These assignment statements affect only the environment seen
by that command.
If the
-k
option is set (see the
set
builtin command below), then
all
parameter assignments are placed in the environment for a command,
not just those that precede the command name.
When
bash
invokes an external command, the variable
_
is set to the full file name of the command and passed to that
command in its environment.
EXIT STATUS
For the shell's purposes, a command which exits with a
zero exit status has succeeded. An exit status of zero
indicates success. A non-zero exit status indicates failure.
When a command terminates on a fatal signal N, bash uses
the value of 128+N as the exit status.
If a command is not found, the child process created to
execute it returns a status of 127. If a command is found
but is not executable, the return status is 126.
If a command fails because of an error during expansion or redirection,
the exit status is greater than zero.
Shell builtin commands return a status of 0 (true) if
successful, and non-zero (false) if an error occurs
while they execute.
All builtins return an exit status of 2 to indicate incorrect usage.
Bash itself returns the exit status of the last command
executed, unless a syntax error occurs, in which case it exits
with a non-zero value. See also the exit builtin
command below.
SIGNALS
When bash is interactive, in the absence of any traps, it ignores
SIGTERM
(so that kill 0 does not kill an interactive shell),
and
SIGINT
is caught and handled (so that the wait builtin is interruptible).
In all cases, bash ignores
SIGQUIT.
If job control is in effect,
bash
ignores
SIGTTIN,
SIGTTOU,
and
SIGTSTP.
Non-builtin commands run by bash have signal handlers
set to the values inherited by the shell from its parent.
When job control is not in effect, asynchronous commands
ignore
SIGINT
and
SIGQUIT
in addition to these inherited handlers.
Commands run as a result of command substitution ignore the
keyboard-generated job control signals
SIGTTIN,
SIGTTOU,
and
SIGTSTP.
The shell exits by default upon receipt of a
SIGHUP.
Before exiting, an interactive shell resends the
SIGHUP
to all jobs, running or stopped.
Stopped jobs are sent
SIGCONT
to ensure that they receive the
SIGHUP.
To prevent the shell from
sending the signal to a particular job, it should be removed from the
jobs table with the
disown
builtin (see
SHELL BUILTIN COMMANDS
below) or marked
to not receive
SIGHUP
using
disown -h.
If the
huponexit
shell option has been set with
shopt,
bash
sends a
SIGHUP
to all jobs when an interactive login shell exits.
If bash is waiting for a command to complete and receives a signal
for which a trap has been set, the trap will not be executed until
the command completes.
When bash is waiting for an asynchronous command via the wait
builtin, the reception of a signal for which a trap has been set will
cause the wait builtin to return immediately with an exit status
greater than 128, immediately after which the trap is executed.
JOB CONTROL
Job control
refers to the ability to selectively stop (suspend)
the execution of processes and continue (resume)
their execution at a later point. A user typically employs
this facility via an interactive interface supplied jointly
by the system's terminal driver and
bash.
The shell associates a
job
with each pipeline. It keeps a table of currently executing
jobs, which may be listed with the
jobs
command. When
bash
starts a job asynchronously (in the
background),
it prints a line that looks like:
-
[1] 25647
indicating that this job is job number 1 and that the process ID
of the last process in the pipeline associated with this job is 25647.
All of the processes in a single pipeline are members of the same job.
Bash
uses the
job
abstraction as the basis for job control.
To facilitate the implementation of the user interface to job
control, the operating system maintains the notion of a current terminal
process group ID. Members of this process group (processes whose
process group ID is equal to the current terminal process group ID)
receive keyboard-generated signals such as
SIGINT.
These processes are said to be in the
foreground.
Background
processes are those whose process group ID differs from the terminal's;
such processes are immune to keyboard-generated signals.
Only foreground processes are allowed to read from or write to the
terminal. Background processes which attempt to read from (write to) the
terminal are sent a
SIGTTIN (SIGTTOU)
signal by the terminal driver,
which, unless caught, suspends the process.
If the operating system on which
bash
is running supports
job control,
bash
contains facilities to use it.
Typing the
suspend
character (typically
^Z,
Control-Z) while a process is running
causes that process to be stopped and returns control to
bash.
Typing the
delayed suspend
character (typically
^Y,
Control-Y) causes the process to be stopped when it
attempts to read input from the terminal, and control to
be returned to
bash.
The user may then manipulate the state of this job, using the
bg
command to continue it in the background, the
fg
command to continue it in the foreground, or
the
kill
command to kill it. A ^Z takes effect immediately,
and has the additional side effect of causing pending output
and typeahead to be discarded.
There are a number of ways to refer to a job in the shell.
The character
%
introduces a job name. Job number
n
may be referred to as
%n.
A job may also be referred to using a prefix of the name used to
start it, or using a substring that appears in its command line.
For example,
%ce
refers to a stopped
ce
job. If a prefix matches more than one job,
bash
reports an error. Using
%?ce,
on the other hand, refers to any job containing the string
ce
in its command line. If the substring matches more than one job,
bash
reports an error. The symbols
%%
and
%+
refer to the shell's notion of the
current job,
which is the last job stopped while it was in
the foreground or started in the background.
The
previous job
may be referenced using
%-.
In output pertaining to jobs (e.g., the output of the
jobs
command), the current job is always flagged with a
+,
and the previous job with a
-.
A single % (with no accompanying job specification) also refers to the
current job.
Simply naming a job can be used to bring it into the
foreground:
%1
is a synonym for
``fg %1'',
bringing job 1 from the background into the foreground.
Similarly,
``%1 &''
resumes job 1 in the background, equivalent to
``bg %1''.
The shell learns immediately whenever a job changes state.
Normally,
bash
waits until it is about to print a prompt before reporting
changes in a job's status so as to not interrupt
any other output. If the
-b
option to the
set
builtin command
is enabled,
bash
reports such changes immediately.
Any trap on
SIGCHLD
is executed for each child that exits.
If an attempt to exit
bash
is made while jobs are stopped, the shell prints a warning message. The
jobs
command may then be used to inspect their status.
If a second attempt to exit is made without an intervening command,
the shell does not print another warning, and the stopped
jobs are terminated.
PROMPTING
When executing interactively,
bash
displays the primary prompt
PS1
when it is ready to read a command, and the secondary prompt
PS2
when it needs more input to complete a command.
Bash
allows these prompt strings to be customized by inserting a number of
backslash-escaped special characters that are decoded as follows:
-
- \a
-
an ASCII bell character (07)
- \d
-
the date in "Weekday Month Date" format (e.g., "Tue May 26")
- \D{format}
-
the format is passed to strftime(3) and the result is inserted
into the prompt string; an empty format results in a locale-specific
time representation. The braces are required
- \e
-
an ASCII escape character (033)
- \h
-
the hostname up to the first `.'
- \H
-
the hostname
- \j
-
the number of jobs currently managed by the shell
- \l
-
the basename of the shell's terminal device name
- \n
-
newline
- \r
-
carriage return
- \s
-
the name of the shell, the basename of
$0
(the portion following the final slash)
- \t
-
the current time in 24-hour HH:MM:SS format
- \T
-
the current time in 12-hour HH:MM:SS format
- \@
-
the current time in 12-hour am/pm format
- \A
-
the current time in 24-hour HH:MM format
- \u
-
the username of the current user
- \v
-
the version of bash (e.g., 2.00)
- \V
-
the release of bash, version + patch level (e.g., 2.00.0)
- \w
-
the current working directory, with $HOME abbreviated with a tilde
- \W
-
the basename of the current working directory, with $HOME
abbreviated with a tilde
- \!
-
the history number of this command
- \#
-
the command number of this command
- \$
-
if the effective UID is 0, a
#,
otherwise a
$
- \nnn
-
the character corresponding to the octal number nnn
- \\
-
a backslash
- \[
-
begin a sequence of non-printing characters, which could be used to
embed a terminal control sequence into the prompt
- \]
-
end a sequence of non-printing characters
The command number and the history number are usually different:
the history number of a command is its position in the history
list, which may include commands restored from the history file
(see
HISTORY
below), while the command number is the position in the sequence
of commands executed during the current shell session.
After the string is decoded, it is expanded via
parameter expansion, command substitution, arithmetic
expansion, and quote removal, subject to the value of the
promptvars
shell option (see the description of the
shopt
command under
SHELL BUILTIN COMMANDS
below).
READLINE
This is the library that handles reading input when using an interactive
shell, unless the
--noediting
option is given at shell invocation.
By default, the line editing commands are similar to those of emacs.
A vi-style line editing interface is also available.
To turn off line editing after the shell is running, use the
+o emacs
or
+o vi
options to the
set
builtin (see
SHELL BUILTIN COMMANDS
below).
Readline Notation
In this section, the emacs-style notation is used to denote
keystrokes. Control keys are denoted by C-key, e.g., C-n
means Control-N. Similarly,
meta
keys are denoted by M-key, so M-x means Meta-X. (On keyboards
without a
meta
key, M-x means ESC x, i.e., press the Escape key
then the
x
key. This makes ESC the meta prefix.
The combination M-C-x means ESC-Control-x,
or press the Escape key
then hold the Control key while pressing the
x
key.)
Readline commands may be given numeric
arguments,
which normally act as a repeat count.
Sometimes, however, it is the sign of the argument that is significant.
Passing a negative argument to a command that acts in the forward
direction (e.g., kill-line) causes that command to act in a
backward direction.
Commands whose behavior with arguments deviates from this are noted
below.
When a command is described as killing text, the text
deleted is saved for possible future retrieval
(yanking). The killed text is saved in a
kill ring. Consecutive kills cause the text to be
accumulated into one unit, which can be yanked all at once.
Commands which do not kill text separate the chunks of text
on the kill ring.
Readline Initialization
Readline is customized by putting commands in an initialization
file (the inputrc file).
The name of this file is taken from the value of the
INPUTRC
variable. If that variable is unset, the default is
~/.inputrc.
When a program which uses the readline library starts up, the
initialization file is read, and the key bindings and variables
are set.
There are only a few basic constructs allowed in the
readline initialization file.
Blank lines are ignored.
Lines beginning with a # are comments.
Lines beginning with a $ indicate conditional constructs.
Other lines denote key bindings and variable settings.
The default key-bindings may be changed with an
inputrc
file.
Other programs that use this library may add their own commands
and bindings.
For example, placing
-
M-Control-u: universal-argument
or
-
C-Meta-u: universal-argument
into the
inputrc
would make M-C-u execute the readline command
universal-argument.
The following symbolic character names are recognized:
RUBOUT,
DEL,
ESC,
LFD,
NEWLINE,
RET,
RETURN,
SPC,
SPACE,
and
TAB.
In addition to command names, readline allows keys to be bound
to a string that is inserted when the key is pressed (a macro).
Readline Key Bindings
The syntax for controlling key bindings in the
inputrc
file is simple. All that is required is the name of the
command or the text of a macro and a key sequence to which
it should be bound. The name may be specified in one of two ways:
as a symbolic key name, possibly with Meta- or Control-
prefixes, or as a key sequence.
When using the form keyname:function-name or macro,
keyname
is the name of a key spelled out in English. For example:
-
Control-u: universal-argument
Meta-Rubout: backward-kill-word
Control-o: "> output"
In the above example,
C-u
is bound to the function
universal-argument,
M-DEL
is bound to the function
backward-kill-word,
and
C-o
is bound to run the macro
expressed on the right hand side (that is, to insert the text
> output
into the line).
In the second form, "keyseq":function-name or macro,
keyseq
differs from
keyname
above in that strings denoting
an entire key sequence may be specified by placing the sequence
within double quotes. Some GNU Emacs style key escapes can be
used, as in the following example, but the symbolic character names
are not recognized.
-
"\C-u": universal-argument
"\C-x\C-r": re-read-init-file
"\e[11~": "Function Key 1"
In this example,
C-u
is again bound to the function
universal-argument.
C-x C-r
is bound to the function
re-read-init-file,
and
ESC [ 1 1 ~
is bound to insert the text
Function Key 1.
The full set of GNU Emacs style escape sequences is
-
- \C-
-
control prefix
- \M-
-
meta prefix
- \e
-
an escape character
- \\
-
backslash
- \
-
literal "
- \aq
-
literal aq
In addition to the GNU Emacs style escape sequences, a second
set of backslash escapes is available:
-
- \a
-
alert (bell)
- \b
-
backspace
- \d
-
delete
- \f
-
form feed
- \n
-
newline
- \r
-
carriage return
- \t
-
horizontal tab
- \v
-
vertical tab
- \nnn
-
the eight-bit character whose value is the octal value nnn
(one to three digits)
- \xHH
-
the eight-bit character whose value is the hexadecimal value HH
(one or two hex digits)
When entering the text of a macro, single or double quotes must
be used to indicate a macro definition.
Unquoted text is assumed to be a function name.
In the macro body, the backslash escapes described above are expanded.
Backslash will quote any other character in the macro text,
including " and aq.
Bash
allows the current readline key bindings to be displayed or modified
with the
bind
builtin command. The editing mode may be switched during interactive
use by using the
-o
option to the
set
builtin command (see
SHELL BUILTIN COMMANDS
below).
Readline Variables
Readline has variables that can be used to further customize its
behavior. A variable may be set in the
inputrc
file with a statement of the form
-
set variable-name value
Except where noted, readline variables can take the values
On
or
Off
(without regard to case).
Unrecognized variable names are ignored.
When a variable value is read, empty or null values, "on" (case-insensitive),
and "1" are equivalent to On. All other values are equivalent to
Off.
The variables and their default values are:
- bell-style (audible)
-
Controls what happens when readline wants to ring the terminal bell.
If set to none, readline never rings the bell. If set to
visible, readline uses a visible bell if one is available.
If set to audible, readline attempts to ring the terminal's bell.
- bind-tty-special-chars (On)
-
If set to On, readline attempts to bind the control characters
treated specially by the kernel's terminal driver to their readline
equivalents.
- comment-begin (``#'')
-
The string that is inserted when the readline
insert-comment
command is executed.
This command is bound to
M-#
in emacs mode and to
#
in vi command mode.
- completion-ignore-case (Off)
-
If set to On, readline performs filename matching and completion
in a case-insensitive fashion.
- completion-query-items (100)
-
This determines when the user is queried about viewing
the number of possible completions
generated by the possible-completions command.
It may be set to any integer value greater than or equal to
zero. If the number of possible completions is greater than
or equal to the value of this variable, the user is asked whether
or not he wishes to view them; otherwise they are simply listed
on the terminal.
- convert-meta (On)
-
If set to On, readline will convert characters with the
eighth bit set to an ASCII key sequence
by stripping the eighth bit and prefixing an
escape character (in effect, using escape as the meta prefix).
- disable-completion (Off)
-
If set to On, readline will inhibit word completion. Completion
characters will be inserted into the line as if they had been
mapped to self-insert.
- editing-mode (emacs)
-
Controls whether readline begins with a set of key bindings similar
to emacs or vi.
editing-mode
can be set to either
emacs
or
vi.
- enable-keypad (Off)
-
When set to On, readline will try to enable the application
keypad when it is called. Some systems need this to enable the
arrow keys.
- expand-tilde (Off)
-
If set to on, tilde expansion is performed when readline
attempts word completion.
- history-preserve-point (Off)
-
If set to on, the history code attempts to place point at the
same location on each history line retrieved with previous-history
or next-history.
- horizontal-scroll-mode (Off)
-
When set to On, makes readline use a single line for display,
scrolling the input horizontally on a single screen line when it
becomes longer than the screen width rather than wrapping to a new line.
- input-meta (Off)
-
If set to On, readline will enable eight-bit input (that is,
it will not strip the high bit from the characters it reads),
regardless of what the terminal claims it can support. The name
meta-flag
is a synonym for this variable.
- isearch-terminators (``C-[C-J'')
-
The string of characters that should terminate an incremental
search without subsequently executing the character as a command.
If this variable has not been given a value, the characters
ESC and C-J will terminate an incremental search.
- keymap (emacs)
-
Set the current readline keymap. The set of valid keymap names is
emacs, emacs-standard, emacs-meta, emacs-ctlx, vi,
vi-command, and
vi-insert.
vi is equivalent to vi-command; emacs is
equivalent to emacs-standard. The default value is
emacs;
the value of
editing-mode
also affects the default keymap.
- mark-directories (On)
-
If set to On, completed directory names have a slash
appended.
- mark-modified-lines (Off)
-
If set to On, history lines that have been modified are displayed
with a preceding asterisk (*).
- mark-symlinked-directories (Off)
-
If set to On, completed names which are symbolic links to directories
have a slash appended (subject to the value of
mark-directories).
- match-hidden-files (On)
-
This variable, when set to On, causes readline to match files whose
names begin with a `.' (hidden files) when performing filename
completion, unless the leading `.' is
supplied by the user in the filename to be completed.
- output-meta (Off)
-
If set to On, readline will display characters with the
eighth bit set directly rather than as a meta-prefixed escape
sequence.
- page-completions (On)
-
If set to On, readline uses an internal more-like pager
to display a screenful of possible completions at a time.
- print-completions-horizontally (Off)
-
If set to On, readline will display completions with matches
sorted horizontally in alphabetical order, rather than down the screen.
- show-all-if-ambiguous (Off)
-
This alters the default behavior of the completion functions. If
set to
on,
words which have more than one possible completion cause the
matches to be listed immediately instead of ringing the bell.
- show-all-if-unmodified (Off)
-
This alters the default behavior of the completion functions in
a fashion similar to show-all-if-ambiguous.
If set to
on,
words which have more than one possible completion without any
possible partial completion (the possible completions don't share
a common prefix) cause the matches to be listed immediately instead
of ringing the bell.
- visible-stats (Off)
-
If set to On, a character denoting a file's type as reported
by stat(2) is appended to the filename when listing possible
completions.
Readline Conditional Constructs
Readline implements a facility similar in spirit to the conditional
compilation features of the C preprocessor which allows key
bindings and variable settings to be performed as the result
of tests. There are four parser directives used.
- $if
-
The
$if
construct allows bindings to be made based on the
editing mode, the terminal being used, or the application using
readline. The text of the test extends to the end of the line;
no characters are required to isolate it.
-
- mode
-
The mode= form of the $if directive is used to test
whether readline is in emacs or vi mode.
This may be used in conjunction
with the set keymap command, for instance, to set bindings in
the emacs-standard and emacs-ctlx keymaps only if
readline is starting out in emacs mode.
- term
-
The term= form may be used to include terminal-specific
key bindings, perhaps to bind the key sequences output by the
terminal's function keys. The word on the right side of the
=
is tested against the both full name of the terminal and the portion
of the terminal name before the first -. This allows
sun
to match both
sun
and
sun-cmd,
for instance.
- application
-
The application construct is used to include
application-specific settings. Each program using the readline
library sets the application name, and an initialization
file can test for a particular value.
This could be used to bind key sequences to functions useful for
a specific program. For instance, the following command adds a
key sequence that quotes the current or previous word in Bash:
-
$if Bash
# Quote the current or previous word
"\C-xq": "\eb\"\ef\""
$endif
- $endif
-
This command, as seen in the previous example, terminates an
$if command.
- $else
-
Commands in this branch of the $if directive are executed if
the test fails.
- $include
-
This directive takes a single filename as an argument and reads commands
and bindings from that file. For example, the following directive
would read /etc/inputrc:
-
$include /etc/inputrc
Searching
Readline provides commands for searching through the command history
(see
HISTORY
below) for lines containing a specified string.
There are two search modes:
incremental
and
non-incremental.
Incremental searches begin before the user has finished typing the
search string.
As each character of the search string is typed, readline displays
the next entry from the history matching the string typed so far.
An incremental search requires only as many characters as needed to
find the desired history entry.
The characters present in the value of the isearch-terminators
variable are used to terminate an incremental search.
If that variable has not been assigned a value the Escape and
Control-J characters will terminate an incremental search.
Control-G will abort an incremental search and restore the original
line.
When the search is terminated, the history entry containing the
search string becomes the current line.
To find other matching entries in the history list, type Control-S or
Control-R as appropriate.
This will search backward or forward in the history for the next
entry matching the search string typed so far.
Any other key sequence bound to a readline command will terminate
the search and execute that command.
For instance, a newline will terminate the search and accept
the line, thereby executing the command from the history list.
Readline remembers the last incremental search string. If two
Control-Rs are typed without any intervening characters defining a
new search string, any remembered search string is used.
Non-incremental searches read the entire search string before starting
to search for matching history lines. The search string may be
typed by the user or be part of the contents of the current line.
Readline Command Names
The following is a list of the names of the commands and the default
key sequences to which they are bound.
Command names without an accompanying key sequence are unbound by default.
In the following descriptions, point refers to the current cursor
position, and mark refers to a cursor position saved by the
set-mark command.
The text between the point and mark is referred to as the region.
Commands for Moving
- beginning-of-line (C-a)
-
Move to the start of the current line.
- end-of-line (C-e)
-
Move to the end of the line.
- forward-char (C-f)
-
Move forward a character.
- backward-char (C-b)
-
Move back a character.
- forward-word (M-f)
-
Move forward to the end of the next word. Words are composed of
alphanumeric characters (letters and digits).
- backward-word (M-b)
-
Move back to the start of the current or previous word. Words are
composed of alphanumeric characters (letters and digits).
- clear-screen (C-l)
-
Clear the screen leaving the current line at the top of the screen.
With an argument, refresh the current line without clearing the
screen.
- redraw-current-line
-
Refresh the current line.
Commands for Manipulating the History
- accept-line (Newline, Return)
-
Accept the line regardless of where the cursor is. If this line is
non-empty, add it to the history list according to the state of the
HISTCONTROL
variable. If the line is a modified history
line, then restore the history line to its original state.
- previous-history (C-p)
-
Fetch the previous command from the history list, moving back in
the list.
- next-history (C-n)
-
Fetch the next command from the history list, moving forward in the
list.
- beginning-of-history (M-<)
-
Move to the first line in the history.
- end-of-history (M->)
-
Move to the end of the input history, i.e., the line currently being
entered.
- reverse-search-history (C-r)
-
Search backward starting at the current line and moving `up' through
the history as necessary. This is an incremental search.
- forward-search-history (C-s)
-
Search forward starting at the current line and moving `down' through
the history as necessary. This is an incremental search.
- non-incremental-reverse-search-history (M-p)
-
Search backward through the history starting at the current line
using a non-incremental search for a string supplied by the user.
- non-incremental-forward-search-history (M-n)
-
Search forward through the history using a non-incremental search for
a string supplied by the user.
- history-search-forward
-
Search forward through the history for the string of characters
between the start of the current line and the point.
This is a non-incremental search.
- history-search-backward
-
Search backward through the history for the string of characters
between the start of the current line and the point.
This is a non-incremental search.
- yank-nth-arg (M-C-y)
-
Insert the first argument to the previous command (usually
the second word on the previous line) at point.
With an argument
n,
insert the nth word from the previous command (the words
in the previous command begin with word 0). A negative argument
inserts the nth word from the end of the previous command.
Once the argument n is computed, the argument is extracted
as if the "!n" history expansion had been specified.
- yank-last-arg (M-., M-_)
-
Insert the last argument to the previous command (the last word of
the previous history entry). With an argument,
behave exactly like yank-nth-arg.
Successive calls to yank-last-arg move back through the history
list, inserting the last argument of each line in turn.
The history expansion facilities are used to extract the last argument,
as if the "!$" history expansion had been specified.
- shell-expand-line (M-C-e)
-
Expand the line as the shell does. This
performs alias and history expansion as well as all of the shell
word expansions. See
HISTORY EXPANSION
below for a description of history expansion.
- history-expand-line (M-^)
-
Perform history expansion on the current line.
See
HISTORY EXPANSION
below for a description of history expansion.
- magic-space
-
Perform history expansion on the current line and insert a space.
See
HISTORY EXPANSION
below for a description of history expansion.
- alias-expand-line
-
Perform alias expansion on the current line.
See
ALIASES
above for a description of alias expansion.
- history-and-alias-expand-line
-
Perform history and alias expansion on the current line.
- insert-last-argument (M-., M-_)
-
A synonym for yank-last-arg.
- operate-and-get-next (C-o)
-
Accept the current line for execution and fetch the next line
relative to the current line from the history for editing. Any
argument is ignored.
- edit-and-execute-command (C-xC-e)
-
Invoke an editor on the current command line, and execute the result as shell
commands.
Bash attempts to invoke
$FCEDIT,
$EDITOR,
and emacs as the editor, in that order.
Commands for Changing Text
- delete-char (C-d)
-
Delete the character at point. If point is at the
beginning of the line, there are no characters in the line, and
the last character typed was not bound to delete-char,
then return
EOF.
- backward-delete-char (Rubout)
-
Delete the character behind the cursor. When given a numeric argument,
save the deleted text on the kill ring.
- forward-backward-delete-char
-
Delete the character under the cursor, unless the cursor is at the
end of the line, in which case the character behind the cursor is
deleted.
- quoted-insert (C-q, C-v)
-
Add the next character typed to the line verbatim. This is
how to insert characters like C-q, for example.
- tab-insert (C-v TAB)
-
Insert a tab character.
- self-insert (a, b, A, 1, !, ...)
-
Insert the character typed.
- transpose-chars (C-t)
-
Drag the character before point forward over the character at point,
moving point forward as well.
If point is at the end of the line, then this transposes
the two characters before point.
Negative arguments have no effect.
- transpose-words (M-t)
-
Drag the word before point past the word after point,
moving point over that word as well.
If point is at the end of the line, this transposes
the last two words on the line.
- upcase-word (M-u)
-
Uppercase the current (or following) word. With a negative argument,
uppercase the previous word, but do not move point.
- downcase-word (M-l)
-
Lowercase the current (or following) word. With a negative argument,
lowercase the previous word, but do not move point.
- capitalize-word (M-c)
-
Capitalize the current (or following) word. With a negative argument,
capitalize the previous word, but do not move point.
- overwrite-mode
-
Toggle overwrite mode. With an explicit positive numeric argument,
switches to overwrite mode. With an explicit non-positive numeric
argument, switches to insert mode. This command affects only
emacs mode; vi mode does overwrite differently.
Each call to readline() starts in insert mode.
In overwrite mode, characters bound to self-insert replace
the text at point rather than pushing the text to the right.
Characters bound to backward-delete-char replace the character
before point with a space. By default, this command is unbound.
Killing and Yanking
- kill-line (C-k)
-
Kill the text from point to the end of the line.
- backward-kill-line (C-x Rubout)
-
Kill backward to the beginning of the line.
- unix-line-discard (C-u)
-
Kill backward from point to the beginning of the line.
The killed text is saved on the kill-ring.
- kill-whole-line
-
Kill all characters on the current line, no matter where point is.
- kill-word (M-d)
-
Kill from point to the end of the current word, or if between
words, to the end of the next word.
Word boundaries are the same as those used by forward-word.
- backward-kill-word (M-Rubout)
-
Kill the word behind point.
Word boundaries are the same as those used by backward-word.
- unix-word-rubout (C-w)
-
Kill the word behind point, using white space as a word boundary.
The killed text is saved on the kill-ring.
- unix-filename-rubout
-
Kill the word behind point, using white space and the slash character
as the word boundaries.
The killed text is saved on the kill-ring.
- delete-horizontal-space (M-\)
-
Delete all spaces and tabs around point.
- kill-region
-
Kill the text in the current region.
- copy-region-as-kill
-
Copy the text in the region to the kill buffer.
- copy-backward-word
-
Copy the word before point to the kill buffer.
The word boundaries are the same as backward-word.
- copy-forward-word
-
Copy the word following point to the kill buffer.
The word boundaries are the same as forward-word.
- yank (C-y)
-
Yank the top of the kill ring into the buffer at point.
- yank-pop (M-y)
-
Rotate the kill ring, and yank the new top. Only works following
yank
or
yank-pop.
Numeric Arguments
- digit-argument (M-0, M-1, ..., M--)
-
Add this digit to the argument already accumulating, or start a new
argument. M-- starts a negative argument.
- universal-argument
-
This is another way to specify an argument.
If this command is followed by one or more digits, optionally with a
leading minus sign, those digits define the argument.
If the command is followed by digits, executing
universal-argument
again ends the numeric argument, but is otherwise ignored.
As a special case, if this command is immediately followed by a
character that is neither a digit or minus sign, the argument count
for the next command is multiplied by four.
The argument count is initially one, so executing this function the
first time makes the argument count four, a second time makes the
argument count sixteen, and so on.
Completing
- complete (TAB)
-
Attempt to perform completion on the text before point.
Bash
attempts completion treating the text as a variable (if the
text begins with $), username (if the text begins with
~), hostname (if the text begins with @), or
command (including aliases and functions) in turn. If none
of these produces a match, filename completion is attempted.
- possible-completions (M-?)
-
List the possible completions of the text before point.
- insert-completions (M-*)
-
Insert all completions of the text before point
that would have been generated by
possible-completions.
- menu-complete
-
Similar to complete, but replaces the word to be completed
with a single match from the list of possible completions.
Repeated execution of menu-complete steps through the list
of possible completions, inserting each match in turn.
At the end of the list of completions, the bell is rung
(subject to the setting of bell-style)
and the original text is restored.
An argument of n moves n positions forward in the list
of matches; a negative argument may be used to move backward
through the list.
This command is intended to be bound to TAB, but is unbound
by default.
- delete-char-or-list
-
Deletes the character under the cursor if not at the beginning or
end of the line (like delete-char).
If at the end of the line, behaves identically to
possible-completions.
This command is unbound by default.
- complete-filename (M-/)
-
Attempt filename completion on the text before point.
- possible-filename-completions (C-x /)
-
List the possible completions of the text before point,
treating it as a filename.
- complete-username (M-~)
-
Attempt completion on the text before point, treating
it as a username.
- possible-username-completions (C-x ~)
-
List the possible completions of the text before point,
treating it as a username.
- complete-variable (M-$)
-
Attempt completion on the text before point, treating
it as a shell variable.
- possible-variable-completions (C-x $)
-
List the possible completions of the text before point,
treating it as a shell variable.
- complete-hostname (M-@)
-
Attempt completion on the text before point, treating
it as a hostname.
- possible-hostname-completions (C-x @)
-
List the possible completions of the text before point,
treating it as a hostname.
- complete-command (M-!)
-
Attempt completion on the text before point, treating
it as a command name. Command completion attempts to
match the text against aliases, reserved words, shell
functions, shell builtins, and finally executable filenames,
in that order.
- possible-command-completions (C-x !)
-
List the possible completions of the text before point,
treating it as a command name.
- dynamic-complete-history (M-TAB)
-
Attempt completion on the text before point, comparing
the text against lines from the history list for possible
completion matches.
- complete-into-braces (M-{)
-
Perform filename completion and insert the list of possible completions
enclosed within braces so the list is available to the shell (see
Brace Expansion
above).
Keyboard Macros
- start-kbd-macro (C-x ()
-
Begin saving the characters typed into the current keyboard macro.
- end-kbd-macro (C-x ))
-
Stop saving the characters typed into the current keyboard macro
and store the definition.
- call-last-kbd-macro (C-x e)
-
Re-execute the last keyboard macro defined, by making the characters
in the macro appear as if typed at the keyboard.
Miscellaneous
- re-read-init-file (C-x C-r)
-
Read in the contents of the inputrc file, and incorporate
any bindings or variable assignments found there.
- abort (C-g)
-
Abort the current editing command and
ring the terminal's bell (subject to the setting of
bell-style).
- do-uppercase-version (M-a, M-b, M-x, ...)
-
If the metafied character x is lowercase, run the command
that is bound to the corresponding uppercase character.
- prefix-meta (ESC)
-
Metafy the next character typed.
ESC
f
is equivalent to
Meta-f.
- undo (C-_, C-x C-u)
-
Incremental undo, separately remembered for each line.
- revert-line (M-r)
-
Undo all changes made to this line. This is like executing the
undo
command enough times to return the line to its initial state.
- tilde-expand (M-&)
-
Perform tilde expansion on the current word.
- set-mark (C-@, M-<space>)
-
Set the mark to the point. If a
numeric argument is supplied, the mark is set to that position.
- exchange-point-and-mark (C-x C-x)
-
Swap the point with the mark. The current cursor position is set to
the saved position, and the old cursor position is saved as the mark.
- character-search (C-])
-
A character is read and point is moved to the next occurrence of that
character. A negative count searches for previous occurrences.
- character-search-backward (M-C-])
-
A character is read and point is moved to the previous occurrence of that
character. A negative count searches for subsequent occurrences.
- insert-comment (M-#)
-
Without a numeric argument, the value of the readline
comment-begin
variable is inserted at the beginning of the current line.
If a numeric argument is supplied, this command acts as a toggle: if
the characters at the beginning of the line do not match the value
of comment-begin, the value is inserted, otherwise
the characters in comment-begin are deleted from the beginning of
the line.
In either case, the line is accepted as if a newline had been typed.
The default value of
comment-begin causes this command to make the current line
a shell comment.
If a numeric argument causes the comment character to be removed, the line
will be executed by the shell.
- glob-complete-word (M-g)
-
The word before point is treated as a pattern for pathname expansion,
with an asterisk implicitly appended. This pattern is used to
generate a list of matching file names for possible completions.
- glob-expand-word (C-x *)
-
The word before point is treated as a pattern for pathname expansion,
and the list of matching file names is inserted, replacing the word.
If a numeric argument is supplied, an asterisk is appended before
pathname expansion.
- glob-list-expansions (C-x g)
-
The list of expansions that would have been generated by
glob-expand-word
is displayed, and the line is redrawn.
If a numeric argument is supplied, an asterisk is appended before
pathname expansion.
- dump-functions
-
Print all of the functions and their key bindings to the
readline output stream. If a numeric argument is supplied,
the output is formatted in such a way that it can be made part
of an inputrc file.
- dump-variables
-
Print all of the settable readline variables and their values to the
readline output stream. If a numeric argument is supplied,
the output is formatted in such a way that it can be made part
of an inputrc file.
- dump-macros
-
Print all of the readline key sequences bound to macros and the
strings they output. If a numeric argument is supplied,
the output is formatted in such a way that it can be made part
of an inputrc file.
- display-shell-version (C-x C-v)
-
Display version information about the current instance of
bash.
Programmable Completion
When word completion is attempted for an argument to a command for
which a completion specification (a compspec) has been defined
using the complete builtin (see
SHELL BUILTIN COMMANDS
below), the programmable completion facilities are invoked.
First, the command name is identified.
If a compspec has been defined for that command, the
compspec is used to generate the list of possible completions for the word.
If the command word is a full pathname, a compspec for the full
pathname is searched for first.
If no compspec is found for the full pathname, an attempt is made to
find a compspec for the portion following the final slash.
Once a compspec has been found, it is used to generate the list of
matching words.
If a compspec is not found, the default bash completion as
described above under Completing is performed.
First, the actions specified by the compspec are used.
Only matches which are prefixed by the word being completed are
returned.
When the
-f
or
-d
option is used for filename or directory name completion, the shell
variable
FIGNORE
is used to filter the matches.
Any completions specified by a filename expansion pattern to the
-G option are generated next.
The words generated by the pattern need not match the word
being completed.
The
GLOBIGNORE
shell variable is not used to filter the matches, but the
FIGNORE
variable is used.
Next, the string specified as the argument to the -W option
is considered.
The string is first split using the characters in the
IFS
special variable as delimiters.
Shell quoting is honored.
Each word is then expanded using
brace expansion, tilde expansion, parameter and variable expansion,
command substitution, and arithmetic expansion,
as described above under
EXPANSION.
The results are split using the rules described above under
Word Splitting.
The results of the expansion are prefix-matched against the word being
completed, and the matching words become the possible completions.
After these matches have been generated, any shell function or command
specified with the -F and -C options is invoked.
When the command or function is invoked, the
COMP_LINE
and
COMP_POINT
variables are assigned values as described above under
Shell Variables.
If a shell function is being invoked, the
COMP_WORDS
and
COMP_CWORD
variables are also set.
When the function or command is invoked, the first argument is the
name of the command whose arguments are being completed, the
second argument is the word being completed, and the third argument
is the word preceding the word being completed on the current command line.
No filtering of the generated completions against the word being completed
is performed; the function or command has complete freedom in generating
the matches.
Any function specified with -F is invoked first.
The function may use any of the shell facilities, including the
compgen builtin described below, to generate the matches.
It must put the possible completions in the
COMPREPLY
array variable.
Next, any command specified with the -C option is invoked
in an environment equivalent to command substitution.
It should print a list of completions, one per line, to the
standard output.
Backslash may be used to escape a newline, if necessary.
After all of the possible completions are generated, any filter
specified with the -X option is applied to the list.
The filter is a pattern as used for pathname expansion; a &
in the pattern is replaced with the text of the word being completed.
A literal & may be escaped with a backslash; the backslash
is removed before attempting a match.
Any completion that matches the pattern will be removed from the list.
A leading ! negates the pattern; in this case any completion
not matching the pattern will be removed.
Finally, any prefix and suffix specified with the -P and -S
options are added to each member of the completion list, and the result is
returned to the readline completion code as the list of possible
completions.
If the previously-applied actions do not generate any matches, and the
-o dirnames option was supplied to complete when the
compspec was defined, directory name completion is attempted.
If the -o plusdirs option was supplied to complete when the
compspec was defined, directory name completion is attempted and any
matches are added to the results of the other actions.
By default, if a compspec is found, whatever it generates is returned
to the completion code as the full set of possible completions.
The default bash completions are not attempted, and the readline
default of filename completion is disabled.
If the -o bashdefault option was supplied to complete when
the compspec was defined, the bash default completions are attempted
if the compspec generates no matches.
If the -o default option was supplied to complete when the
compspec was defined, readline's default completion will be performed
if the compspec (and, if attempted, the default bash completions)
generate no matches.
When a compspec indicates that directory name completion is desired,
the programmable completion functions force readline to append a slash
to completed names which are symbolic links to directories, subject to
the value of the mark-directories readline variable, regardless
of the setting of the mark-symlinked-directories readline variable.
HISTORY
When the
-o history
option to the
set
builtin is enabled, the shell provides access to the
command history,
the list of commands previously typed.
The value of the HISTSIZE variable is used as the
number of commands to save in a history list.
The text of the last
HISTSIZE
commands (default 500) is saved. The shell
stores each command in the history list prior to parameter and
variable expansion (see
EXPANSION
above) but after history expansion is performed, subject to the
values of the shell variables
HISTIGNORE
and
HISTCONTROL.
On startup, the history is initialized from the file named by
the variable
HISTFILE
(default ~/.bash_history).
The file named by the value of
HISTFILE
is truncated, if necessary, to contain no more than
the number of lines specified by the value of
HISTFILESIZE.
When an interactive shell exits, the last
$HISTSIZE
lines are copied from the history list to
$HISTFILE.
If the
histappend
shell option is enabled
(see the description of
shopt
under
SHELL BUILTIN COMMANDS
below), the lines are appended to the history file,
otherwise the history file is overwritten.
If
HISTFILE
is unset, or if the history file is unwritable, the history is
not saved. After saving the history, the history file is truncated
to contain no more than
HISTFILESIZE
lines. If
HISTFILESIZE
is not set, no truncation is performed.
The builtin command
fc
(see
SHELL BUILTIN COMMANDS
below) may be used to list or edit and re-execute a portion of
the history list.
The
history
builtin may be used to display or modify the history list and
manipulate the history file.
When using command-line editing, search commands
are available in each editing mode that provide access to the
history list.
The shell allows control over which commands are saved on the history
list. The
HISTCONTROL
and
HISTIGNORE
variables may be set to cause the shell to save only a subset of the
commands entered.
The
cmdhist
shell option, if enabled, causes the shell to attempt to save each
line of a multi-line command in the same history entry, adding
semicolons where necessary to preserve syntactic correctness.
The
lithist
shell option causes the shell to save the command with embedded newlines
instead of semicolons. See the description of the
shopt
builtin below under
SHELL BUILTIN COMMANDS
for information on setting and unsetting shell options.
HISTORY EXPANSION
The shell supports a history expansion feature that
is similar to the history expansion in
csh.
This section describes what syntax features are available. This
feature is enabled by default for interactive shells, and can be
disabled using the
+H
option to the
set
builtin command (see
SHELL BUILTIN COMMANDS
below). Non-interactive shells do not perform history expansion
by default.
History expansions introduce words from the history list into
the input stream, making it easy to repeat commands, insert the
arguments to a previous command into the current input line, or
fix errors in previous commands quickly.
History expansion is performed immediately after a complete line
is read, before the shell breaks it into words.
It takes place in two parts.
The first is to determine which line from the history list
to use during substitution.
The second is to select portions of that line for inclusion into
the current one.
The line selected from the history is the event,
and the portions of that line that are acted upon are words.
Various modifiers are available to manipulate the selected words.
The line is broken into words in the same fashion as when reading input,
so that several metacharacter-separated words surrounded by
quotes are considered one word.
History expansions are introduced by the appearance of the
history expansion character, which is ! by default.
Only backslash (\) and single quotes can quote
the history expansion character.
Several characters inhibit history expansion if found immediately
following the history expansion character, even if it is unquoted:
space, tab, newline, carriage return, and =.
If the extglob shell option is enabled, ( will also
inhibit expansion.
Several shell options settable with the
shopt
builtin may be used to tailor the behavior of history expansion.
If the
histverify
shell option is enabled (see the description of the
shopt
builtin), and
readline
is being used, history substitutions are not immediately passed to
the shell parser.
Instead, the expanded line is reloaded into the
readline
editing buffer for further modification.
If
readline
is being used, and the
histreedit
shell option is enabled, a failed history substitution will be reloaded
into the
readline
editing buffer for correction.
The
-p
option to the
history
builtin command may be used to see what a history expansion will
do before using it.
The
-s
option to the
history
builtin may be used to add commands to the end of the history list
without actually executing them, so that they are available for
subsequent recall.
The shell allows control of the various characters used by the
history expansion mechanism (see the description of
histchars
above under
Shell Variables).
Event Designators
An event designator is a reference to a command line entry in the
history list.
- !
-
Start a history substitution, except when followed by a
blank,
newline, carriage return, =
or ( (when the extglob shell option is enabled using
the shopt builtin).
- !n
-
Refer to command line
n.
- !-n
-
Refer to the current command line minus
n.
- !!
-
Refer to the previous command. This is a synonym for `!-1'.
- !string
-
Refer to the most recent command starting with
string.
- !?string[?]
-
Refer to the most recent command containing
string.
The trailing ? may be omitted if
string
is followed immediately by a newline.
- ^string1^string2^
-
Quick substitution. Repeat the last command, replacing
string1
with
string2.
Equivalent to
``!!:s/string1/string2/''
(see Modifiers below).
- !#
-
The entire command line typed so far.
Word Designators
Word designators are used to select desired words from the event.
A
:
separates the event specification from the word designator.
It may be omitted if the word designator begins with a
^,
$,
*,
-,
or
%.
Words are numbered from the beginning of the line,
with the first word being denoted by 0 (zero).
Words are inserted into the current line separated by single spaces.
- 0 (zero)
-
The zeroth word. For the shell, this is the command
word.
- n
-
The nth word.
- ^
-
The first argument. That is, word 1.
- $
-
The last argument.
- %
-
The word matched by the most recent `?string?' search.
- x-y
-
A range of words; `-y' abbreviates `0-y'.
- *
-
All of the words but the zeroth. This is a synonym
for `1-$'. It is not an error to use
*
if there is just one
word in the event; the empty string is returned in that case.
- x*
-
Abbreviates x-$.
- x-
-
Abbreviates x-$ like x*, but omits the last word.
If a word designator is supplied without an event specification, the
previous command is used as the event.
Modifiers
After the optional word designator, there may appear a sequence of
one or more of the following modifiers, each preceded by a `:'.
- h
-
Remove a trailing file name component, leaving only the head.
- t
-
Remove all leading file name components, leaving the tail.
- r
-
Remove a trailing suffix of the form .xxx, leaving the
basename.
- e
-
Remove all but the trailing suffix.
- p
-
Print the new command but do not execute it.
- q
-
Quote the substituted words, escaping further substitutions.
- x
-
Quote the substituted words as with
q,
but break into words at
blanks
and newlines.
- s/old/new/
-
Substitute
new
for the first occurrence of
old
in the event line. Any delimiter can be used in place of /. The
final delimiter is optional if it is the last character of the
event line. The delimiter may be quoted in
old
and
new
with a single backslash. If & appears in
new,
it is replaced by
old.
A single backslash will quote the &. If
old
is null, it is set to the last
old
substituted, or, if no previous history substitutions took place,
the last
string
in a
!?string[?]
search.
- &
-
Repeat the previous substitution.
- g
-
Cause changes to be applied over the entire event line. This is
used in conjunction with `:s' (e.g., `:gs/old/new/')
or `:&'. If used with
`:s', any delimiter can be used
in place of /, and the final delimiter is optional
if it is the last character of the event line.
An a may be used as a synonym for g.
- G
-
Apply the following `s' modifier once to each word in the event line.
SHELL BUILTIN COMMANDS
Unless otherwise noted, each builtin command documented in this
section as accepting options preceded by
-
accepts
--
to signify the end of the options.
For example, the :, true, false, and test builtins
do not accept options.
- : [arguments]
-
No effect; the command does nothing beyond expanding
arguments
and performing any specified
redirections. A zero exit code is returned.
- . filename [arguments]
-
- source filename [arguments]
-
Read and execute commands from
filename
in the current
shell environment and return the exit status of the last command
executed from
filename.
If
filename
does not contain a slash, file names in
PATH
are used to find the directory containing
filename.
The file searched for in
PATH
need not be executable.
When bash is not in posix mode, the current directory is
searched if no file is found in
PATH.
If the
sourcepath
option to the
shopt
builtin command is turned off, the
PATH
is not searched.
If any arguments are supplied, they become the positional
parameters when filename is executed. Otherwise the positional
parameters are unchanged.
The return status is the status of the last command exited within
the script (0 if no commands are executed), and false if
filename
is not found or cannot be read.
- alias [-p] [name[=value] ...]
-
Alias with no arguments or with the
-p
option prints the list of aliases in the form
alias name=value on standard output.
When arguments are supplied, an alias is defined for
each name whose value is given.
A trailing space in value causes the next word to be
checked for alias substitution when the alias is expanded.
For each name in the argument list for which no value
is supplied, the name and value of the alias is printed.
Alias returns true unless a name is given for which
no alias has been defined.
- bg [jobspec ...]
-
Resume each suspended job jobspec in the background, as if it
had been started with
&.
If jobspec is not present, the shell's notion of the
current job is used.
bg
jobspec
returns 0 unless run when job control is disabled or, when run with
job control enabled, any specified jobspec was not found
or was started without job control.
- bind [-m keymap] [-lpsvPSV]
-
- bind [-m keymap] [-q function] [-u function] [-r keyseq]
-
- bind [-m keymap] -f filename
-
- bind [-m keymap] -x keyseq:shell-command
-
- bind [-m keymap] keyseq:function-name
-
- bind readline-command
-
Display current
readline
key and function bindings, bind a key sequence to a
readline
function or macro, or set a
readline
variable.
Each non-option argument is a command as it would appear in
.inputrc,
but each binding or command must be passed as a separate argument;
e.g., '"\C-x\C-r": re-read-init-file'.
Options, if supplied, have the following meanings:
-
- -m keymap
-
Use
keymap
as the keymap to be affected by the subsequent bindings.
Acceptable
keymap
names are
emacs, emacs-standard, emacs-meta, emacs-ctlx, vi,
vi-move, vi-command, and
vi-insert.
vi is equivalent to vi-command; emacs is
equivalent to emacs-standard.
- -l
-
List the names of all readline functions.
- -p
-
Display readline function names and bindings in such a way
that they can be re-read.
- -P
-
List current readline function names and bindings.
- -v
-
Display readline variable names and values in such a way that they
can be re-read.
- -V
-
List current readline variable names and values.
- -s
-
Display readline key sequences bound to macros and the strings
they output in such a way that they can be re-read.
- -S
-
Display readline key sequences bound to macros and the strings
they output.
- -f filename
-
Read key bindings from filename.
- -q function
-
Query about which keys invoke the named function.
- -u function
-
Unbind all keys bound to the named function.
- -r keyseq
-
Remove any current binding for keyseq.
- -x keyseq:shell-command
-
Cause shell-command to be executed whenever keyseq is
entered.
The return value is 0 unless an unrecognized option is given or an
error occurred.
- break [n]
-
Exit from within a
for,
while,
until,
or
select
loop. If n is specified, break n levels.
n
must be >= 1. If
n
is greater than the number of enclosing loops, all enclosing loops
are exited. The return value is 0 unless the shell is not executing
a loop when
break
is executed.
- builtin shell-builtin [arguments]
-
Execute the specified shell builtin, passing it
arguments,
and return its exit status.
This is useful when defining a
function whose name is the same as a shell builtin,
retaining the functionality of the builtin within the function.
The cd builtin is commonly redefined this way.
The return status is false if
shell-builtin
is not a shell builtin command.
- cd [-L|-P] [dir]
-
Change the current directory to dir. The variable
HOME
is the
default
dir.
The variable
CDPATH
defines the search path for the directory containing
dir.
Alternative directory names in
CDPATH
are separated by a colon (:). A null directory name in
CDPATH
is the same as the current directory, i.e., ``.''. If
dir
begins with a slash (/),
then
CDPATH
is not used. The
-P
option says to use the physical directory structure instead of
following symbolic links (see also the
-P
option to the
set
builtin command); the
-L
option forces symbolic links to be followed. An argument of
-
is equivalent to
$OLDPWD.
If a non-empty directory name from CDPATH is used, or if
- is the first argument, and the directory change is
successful, the absolute pathname of the new working directory is
written to the standard output.
The return value is true if the directory was successfully changed;
false otherwise.
- caller [expr]
-
Returns the context of any active subroutine call (a shell function or
a script executed with the . or source builtins.
Without expr, caller displays the line number and source
filename of the current subroutine call.
If a non-negative integer is supplied as expr, caller
displays the line number, subroutine name, and source file corresponding
to that position in the current execution call stack. This extra
information may be used, for example, to print a stack trace. The
current frame is frame 0.
The return value is 0 unless the shell is not executing a subroutine
call or expr does not correspond to a valid position in the
call stack.
- command [-pVv] command [arg ...]
-
Run
command
with
args
suppressing the normal shell function lookup. Only builtin
commands or commands found in the
PATH
are executed. If the
-p
option is given, the search for
command
is performed using a default value for
PATH
that is guaranteed to find all of the standard utilities.
If either the
-V
or
-v
option is supplied, a description of
command
is printed. The
-v
option causes a single word indicating the command or file name
used to invoke
command
to be displayed; the
-V
option produces a more verbose description.
If the
-V
or
-v
option is supplied, the exit status is 0 if
command
was found, and 1 if not. If neither option is supplied and
an error occurred or
command
cannot be found, the exit status is 127. Otherwise, the exit status of the
command
builtin is the exit status of
command.
- compgen [option] [word]
-
Generate possible completion matches for word according to
the options, which may be any option accepted by the
complete
builtin with the exception of -p and -r, and write
the matches to the standard output.
When using the -F or -C options, the various shell variables
set by the programmable completion facilities, while available, will not
have useful values.
The matches will be generated in the same way as if the programmable
completion code had generated them directly from a completion specification
with the same flags.
If word is specified, only those completions matching word
will be displayed.
The return value is true unless an invalid option is supplied, or no
matches were generated.
- complete [-abcdefgjksuv] [-o comp-option] [-A action] [-G globpat] [-W wordlist] [-P prefix] [-S suffix]
-
[-X filterpat] [-F function] [-C command] name [name ...]
- complete -pr [name ...]
-
Specify how arguments to each name should be completed.
If the -p option is supplied, or if no options are supplied,
existing completion specifications are printed in a way that allows
them to be reused as input.
The -r option removes a completion specification for
each name, or, if no names are supplied, all
completion specifications.
The process of applying these completion specifications when word completion
is attempted is described above under Programmable Completion.
Other options, if specified, have the following meanings.
The arguments to the -G, -W, and -X options
(and, if necessary, the -P and -S options)
should be quoted to protect them from expansion before the
complete
builtin is invoked.
-
- -o comp-option
-
The comp-option controls several aspects of the compspec's behavior
beyond the simple generation of completions.
comp-option may be one of:
-
- bashdefault
-
Perform the rest of the default bash completions if the compspec
generates no matches.
- default
-
Use readline's default filename completion if the compspec generates
no matches.
- dirnames
-
Perform directory name completion if the compspec generates no matches.
- filenames
-
Tell readline that the compspec generates filenames, so it can perform any
filename-specific processing (like adding a slash to directory names or
suppressing trailing spaces). Intended to be used with shell functions.
- nospace
-
Tell readline not to append a space (the default) to words completed at
the end of the line.
- plusdirs
-
After any matches defined by the compspec are generated,
directory name completion is attempted and any
matches are added to the results of the other actions.
- -A action
-
The action may be one of the following to generate a list of possible
completions:
-
- alias
-
Alias names. May also be specified as -a.
- arrayvar
-
Array variable names.
- binding
-
Readline key binding names.
- builtin
-
Names of shell builtin commands. May also be specified as -b.
- command
-
Command names. May also be specified as -c.
- directory
-
Directory names. May also be specified as -d.
- disabled
-
Names of disabled shell builtins.
- enabled
-
Names of enabled shell builtins.
- export
-
Names of exported shell variables. May also be specified as -e.
- file
-
File names. May also be specified as -f.
- function
-
Names of shell functions.
- group
-
Group names. May also be specified as -g.
- helptopic
-
Help topics as accepted by the help builtin.
- hostname
-
Hostnames, as taken from the file specified by the
HOSTFILE
shell variable.
- job
-
Job names, if job control is active. May also be specified as -j.
- keyword
-
Shell reserved words. May also be specified as -k.
- running
-
Names of running jobs, if job control is active.
- service
-
Service names. May also be specified as -s.
- setopt
-
Valid arguments for the -o option to the set builtin.
- shopt
-
Shell option names as accepted by the shopt builtin.
- signal
-
Signal names.
- stopped
-
Names of stopped jobs, if job control is active.
- user
-
User names. May also be specified as -u.
- variable
-
Names of all shell variables. May also be specified as -v.
- -G globpat
-
The filename expansion pattern globpat is expanded to generate
the possible completions.
- -W wordlist
-
The wordlist is split using the characters in the
IFS
special variable as delimiters, and each resultant word is expanded.
The possible completions are the members of the resultant list which
match the word being completed.
- -C command
-
command is executed in a subshell environment, and its output is
used as the possible completions.
- -F function
-
The shell function function is executed in the current shell
environment.
When it finishes, the possible completions are retrieved from the value
of the
COMPREPLY
array variable.
- -X filterpat
-
filterpat is a pattern as used for filename expansion.
It is applied to the list of possible completions generated by the
preceding options and arguments, and each completion matching
filterpat is removed from the list.
A leading ! in filterpat negates the pattern; in this
case, any completion not matching filterpat is removed.
- -P prefix
-
prefix is added at the beginning of each possible completion
after all other options have been applied.
- -S suffix
-
suffix is appended to each possible completion
after all other options have been applied.
The return value is true unless an invalid option is supplied, an option
other than -p or -r is supplied without a name
argument, an attempt is made to remove a completion specification for
a name for which no specification exists, or
an error occurs adding a completion specification.
- continue [n]
-
Resume the next iteration of the enclosing
for,
while,
until,
or
select
loop.
If
n
is specified, resume at the nth enclosing loop.
n
must be >= 1. If
n
is greater than the number of enclosing loops, the last enclosing loop
(the ``top-level'' loop) is resumed. The return value is 0 unless the
shell is not executing a loop when
continue
is executed.
- declare [-afFirtx] [-p] [name[=value] ...]
-
- typeset [-afFirtx] [-p] [name[=value] ...]
-
Declare variables and/or give them attributes.
If no names are given then display the values of variables.
The
-p
option will display the attributes and values of each
name.
When
-p
is used, additional options are ignored.
The
-F
option inhibits the display of function definitions; only the
function name and attributes are printed.
If the extdebug shell option is enabled using shopt,
the source file name and line number where the function is defined
are displayed as well. The
-F
option implies
-f.
The following options can
be used to restrict output to variables with the specified attribute or
to give variables attributes:
-
- -a
-
Each name is an array variable (see
Arrays
above).
- -f
-
Use function names only.
- -i
-
The variable is treated as an integer; arithmetic evaluation (see
ARITHMETIC EVALUATION )
is performed when the variable is assigned a value.
- -r
-
Make names readonly. These names cannot then be assigned values
by subsequent assignment statements or unset.
- -t
-
Give each name the trace attribute.
Traced functions inherit the DEBUG and RETURN traps from
the calling shell.
The trace attribute has no special meaning for variables.
- -x
-
Mark names for export to subsequent commands via the environment.
Using `+' instead of `-'
turns off the attribute instead, with the exception that +a
may not be used to destroy an array variable. When used in a function,
makes each
name local, as with the
local
command.
If a variable name is followed by =value, the value of
the variable is set to value.
The return value is 0 unless an invalid option is encountered,
an attempt is made to define a function using
-f foo=bar,
an attempt is made to assign a value to a readonly variable,
an attempt is made to assign a value to an array variable without
using the compound assignment syntax (see
Arrays
above), one of the names is not a valid shell variable name,
an attempt is made to turn off readonly status for a readonly variable,
an attempt is made to turn off array status for an array variable,
or an attempt is made to display a non-existent function with -f.
- dirs [-clpv] [+n] [-n]
-
Without options, displays the list of currently remembered directories.
The default display is on a single line with directory names separated
by spaces.
Directories are added to the list with the
pushd
command; the
popd
command removes entries from the list.
-
- +n
-
Displays the nth entry counting from the left of the list
shown by
dirs
when invoked without options, starting with zero.
- -n
-
Displays the nth entry counting from the right of the list
shown by
dirs
when invoked without options, starting with zero.
- -c
-
Clears the directory stack by deleting all of the entries.
- -l
-
Produces a longer listing; the default listing format uses a
tilde to denote the home directory.
- -p
-
Print the directory stack with one entry per line.
- -v
-
Print the directory stack with one entry per line,
prefixing each entry with its index in the stack.
The return value is 0 unless an
invalid option is supplied or n indexes beyond the end
of the directory stack.
- disown [-ar] [-h] [jobspec ...]
-
Without options, each
jobspec
is removed from the table of active jobs.
If the -h option is given, each
jobspec
is not removed from the table, but is marked so that
SIGHUP
is not sent to the job if the shell receives a
SIGHUP.
If no
jobspec
is present, and neither the
-a
nor the
-r
option is supplied, the current job is used.
If no
jobspec
is supplied, the
-a
option means to remove or mark all jobs; the
-r
option without a
jobspec
argument restricts operation to running jobs.
The return value is 0 unless a
jobspec
does not specify a valid job.
- echo [-neE] [arg ...]
-
Output the args, separated by spaces, followed by a newline.
The return status is always 0.
If -n is specified, the trailing newline is
suppressed. If the -e option is given, interpretation of
the following backslash-escaped characters is enabled. The
-E
option disables the interpretation of these escape characters,
even on systems where they are interpreted by default.
The xpg_echo shell option may be used to
dynamically determine whether or not echo expands these
escape characters by default.
echo
does not interpret -- to mean the end of options.
echo
interprets the following escape sequences:
-
- \a
-
alert (bell)
- \b
-
backspace
- \c
-
suppress trailing newline
- \e
-
an escape character
- \f
-
form feed
- \n
-
new line
- \r
-
carriage return
- \t
-
horizontal tab
- \v
-
vertical tab
- \\
-
backslash
- \0nnn
-
the eight-bit character whose value is the octal value nnn
(zero to three octal digits)
- \xHH
-
the eight-bit character whose value is the hexadecimal value HH
(one or two hex digits)
- enable [-adnps] [-f filename] [name ...]
-
Enable and disable builtin shell commands.
Disabling a builtin allows a disk command which has the same name
as a shell builtin to be executed without specifying a full pathname,
even though the shell normally searches for builtins before disk commands.
If -n is used, each name
is disabled; otherwise,
names are enabled. For example, to use the
test
binary found via the
PATH
instead of the shell builtin version, run
enable -n test.
The
-f
option means to load the new builtin command
name
from shared object
filename,
on systems that support dynamic loading. The
-d
option will delete a builtin previously loaded with
-f.
If no name arguments are given, or if the
-p
option is supplied, a list of shell builtins is printed.
With no other option arguments, the list consists of all enabled
shell builtins.
If -n is supplied, only disabled builtins are printed.
If -a is supplied, the list printed includes all builtins, with an
indication of whether or not each is enabled.
If -s is supplied, the output is restricted to the POSIX
special builtins.
The return value is 0 unless a
name
is not a shell builtin or there is an error loading a new builtin
from a shared object.
- eval [arg ...]
-
The args are read and concatenated together into a single
command. This command is then read and executed by the shell, and
its exit status is returned as the value of
eval.
If there are no
args,
or only null arguments,
eval
returns 0.
- exec [-cl] [-a name] [command [arguments]]
-
If
command
is specified, it replaces the shell.
No new process is created. The
arguments
become the arguments to command.
If the
-l
option is supplied,
the shell places a dash at the beginning of the zeroth arg passed to
command.
This is what
login(1)
does. The
-c
option causes
command
to be executed with an empty environment. If
-a
is supplied, the shell passes
name
as the zeroth argument to the executed command. If
command
cannot be executed for some reason, a non-interactive shell exits,
unless the shell option
execfail
is enabled, in which case it returns failure.
An interactive shell returns failure if the file cannot be executed.
If
command
is not specified, any redirections take effect in the current shell,
and the return status is 0. If there is a redirection error, the
return status is 1.
- exit [n]
-
Cause the shell to exit
with a status of n. If
n
is omitted, the exit status
is that of the last command executed.
A trap on
EXIT
is executed before the shell terminates.
- export [-fn] [name[=word]] ...
-
- export -p
-
The supplied
names
are marked for automatic export to the environment of
subsequently executed commands. If the
-f
option is given,
the
names
refer to functions.
If no
names
are given, or if the
-p
option is supplied, a list
of all names that are exported in this shell is printed.
The
-n
option causes the export property to be removed from each
name.
If a variable name is followed by =word, the value of
the variable is set to word.
export
returns an exit status of 0 unless an invalid option is
encountered,
one of the names is not a valid shell variable name, or
-f
is supplied with a
name
that is not a function.
- fc [-e ename] [-nlr] [first] [last]
-
- fc -s [pat=rep] [cmd]
-
Fix Command. In the first form, a range of commands from
first
to
last
is selected from the history list.
First
and
last
may be specified as a string (to locate the last command beginning
with that string) or as a number (an index into the history list,
where a negative number is used as an offset from the current
command number). If
last
is not specified it is set to
the current command for listing (so that
fc -l -10
prints the last 10 commands) and to
first
otherwise.
If
first
is not specified it is set to the previous
command for editing and -16 for listing.
The
-n
option suppresses
the command numbers when listing. The
-r
option reverses the order of
the commands. If the
-l
option is given,
the commands are listed on
standard output. Otherwise, the editor given by
ename
is invoked
on a file containing those commands. If
ename
is not given, the
value of the
FCEDIT
variable is used, and
the value of
EDITOR
if
FCEDIT
is not set. If neither variable is set,
vi
is used. When editing is complete, the edited commands are
echoed and executed.
In the second form, command is re-executed after each instance
of pat is replaced by rep.
A useful alias to use with this is
r='fc -s',
so that typing
r cc
runs the last command beginning with
cc
and typing
r
re-executes the last command.
If the first form is used, the return value is 0 unless an invalid
option is encountered or
first
or
last
specify history lines out of range.
If the
-e
option is supplied, the return value is the value of the last
command executed or failure if an error occurs with the temporary
file of commands. If the second form is used, the return status
is that of the command re-executed, unless
cmd
does not specify a valid history line, in which case
fc
returns failure.
- fg [jobspec]
-
Resume
jobspec
in the foreground, and make it the current job.
If
jobspec
is not present, the shell's notion of the current job is used.
The return value is that of the command placed into the foreground,
or failure if run when job control is disabled or, when run with
job control enabled, if
jobspec
does not specify a valid job or
jobspec
specifies a job that was started without job control.
- getopts optstring name [args]
-
getopts
is used by shell procedures to parse positional parameters.
optstring
contains the option characters to be recognized; if a character
is followed by a colon, the option is expected to have an
argument, which should be separated from it by white space.
The colon and question mark characters may not be used as
option characters.
Each time it is invoked,
getopts
places the next option in the shell variable
name,
initializing
name
if it does not exist,
and the index of the next argument to be processed into the
variable
OPTIND.
OPTIND
is initialized to 1 each time the shell or a shell script
is invoked. When an option requires an argument,
getopts
places that argument into the variable
OPTARG.
The shell does not reset
OPTIND
automatically; it must be manually reset between multiple
calls to
getopts
within the same shell invocation if a new set of parameters
is to be used.
When the end of options is encountered, getopts exits with a
return value greater than zero.
OPTIND is set to the index of the first non-option argument,
and name is set to ?.
getopts
normally parses the positional parameters, but if more arguments are
given in
args,
getopts
parses those instead.
getopts
can report errors in two ways. If the first character of
optstring
is a colon,
silent
error reporting is used. In normal operation diagnostic messages
are printed when invalid options or missing option arguments are
encountered.
If the variable
OPTERR
is set to 0, no error messages will be displayed, even if the first
character of
optstring
is not a colon.
If an invalid option is seen,
getopts
places ? into
name
and, if not silent,
prints an error message and unsets
OPTARG.
If
getopts
is silent,
the option character found is placed in
OPTARG
and no diagnostic message is printed.
If a required argument is not found, and
getopts
is not silent,
a question mark (?) is placed in
name,
OPTARG
is unset, and a diagnostic message is printed.
If
getopts
is silent, then a colon (:) is placed in
name
and
OPTARG
is set to the option character found.
getopts
returns true if an option, specified or unspecified, is found.
It returns false if the end of options is encountered or an
error occurs.
- hash [-lr] [-p filename] [-dt] [name]
-
For each
name,
the full file name of the command is determined by searching
the directories in
$PATH
and remembered.
If the
-p
option is supplied, no path search is performed, and
filename
is used as the full file name of the command.
The
-r
option causes the shell to forget all
remembered locations.
The
-d
option causes the shell to forget the remembered location of each name.
If the
-t
option is supplied, the full pathname to which each name corresponds
is printed. If multiple name arguments are supplied with -t,
the name is printed before the hashed full pathname.
The
-l
option causes output to be displayed in a format that may be reused as input.
If no arguments are given, or if only -l is supplied,
information about remembered commands is printed.
The return status is true unless a
name
is not found or an invalid option is supplied.
- help [-s] [pattern]
-
Display helpful information about builtin commands. If
pattern
is specified,
help
gives detailed help on all commands matching
pattern;
otherwise help for all the builtins and shell control structures
is printed.
The -s option restricts the information displayed to a short
usage synopsis.
The return status is 0 unless no command matches
pattern.
- history [n]
-
- history -c
-
- history -d offset
-
- history -anrw [filename]
-
- history -p arg [arg ...]
-
- history -s arg [arg ...]
-
With no options, display the command
history list with line numbers. Lines listed
with a
*
have been modified. An argument of
n
lists only the last
n
lines.
If the shell variable HISTTIMEFORMAT is set and not null,
it is used as a format string for strftime(3) to display
the time stamp associated with each displayed history entry.
No intervening blank is printed between the formatted time stamp
and the history line.
If filename is supplied, it is used as the
name of the history file; if not, the value of
HISTFILE
is used. Options, if supplied, have the following meanings:
-
- -c
-
Clear the history list by deleting all the entries.
- -d offset
-
Delete the history entry at position offset.
- -a
-
Append the ``new'' history lines (history lines entered since the
beginning of the current bash session) to the history file.
- -n
-
Read the history lines not already read from the history
file into the current history list. These are lines
appended to the history file since the beginning of the
current bash session.
- -r
-
Read the contents of the history file
and use them as the current history.
- -w
-
Write the current history to the history file, overwriting the
history file's contents.
- -p
-
Perform history substitution on the following args and display
the result on the standard output.
Does not store the results in the history list.
Each arg must be quoted to disable normal history expansion.
- -s
-
Store the
args
in the history list as a single entry. The last command in the
history list is removed before the
args
are added.
If the HISTTIMEFORMAT is set, the time stamp information
associated with each history entry is written to the history file.
The return value is 0 unless an invalid option is encountered, an
error occurs while reading or writing the history file, an invalid
offset is supplied as an argument to -d, or the
history expansion supplied as an argument to -p fails.
- jobs [-lnprs] [ jobspec ... ]
-
- jobs -x command [ args ... ]
-
The first form lists the active jobs. The options have the following
meanings:
-
- -l
-
List process IDs
in addition to the normal information.
- -p
-
List only the process ID of the job's process group
leader.
- -n
-
Display information only about jobs that have changed status since
the user was last notified of their status.
- -r
-
Restrict output to running jobs.
- -s
-
Restrict output to stopped jobs.
If
jobspec
is given, output is restricted to information about that job.
The return status is 0 unless an invalid option is encountered
or an invalid
jobspec
is supplied.
If the
-x
option is supplied,
jobs
replaces any
jobspec
found in
command
or
args
with the corresponding process group ID, and executes
command
passing it
args,
returning its exit status.
- kill [-s sigspec | -n signum | -sigspec] [pid | jobspec] ...
-
- kill -l [sigspec | exit_status]
-
Send the signal named by
sigspec
or
signum
to the processes named by
pid
or
jobspec.
sigspec
is either a case-insensitive signal name such as
SIGKILL
(with or without the
SIG
prefix) or a signal number;
signum
is a signal number.
If
sigspec
is not present, then
SIGTERM
is assumed.
An argument of
-l
lists the signal names.
If any arguments are supplied when
-l
is given, the names of the signals corresponding to the arguments are
listed, and the return status is 0.
The exit_status argument to
-l
is a number specifying either a signal number or the exit status of
a process terminated by a signal.
kill
returns true if at least one signal was successfully sent, or false
if an error occurs or an invalid option is encountered.
- let arg [arg ...]
-
Each
arg
is an arithmetic expression to be evaluated (see
ARITHMETIC EVALUATION).
If the last
arg
evaluates to 0,
let
returns 1; 0 is returned otherwise.
- local [option] [name[=value] ...]
-
For each argument, a local variable named
name
is created, and assigned
value.
The option can be any of the options accepted by declare.
When
local
is used within a function, it causes the variable
name
to have a visible scope restricted to that function and its children.
With no operands,
local
writes a list of local variables to the standard output. It is
an error to use
local
when not within a function. The return status is 0 unless
local
is used outside a function, an invalid
name
is supplied, or
name is a readonly variable.
- logout
-
Exit a login shell.
- popd [-n] [+n] [-n]
-
Removes entries from the directory stack. With no arguments,
removes the top directory from the stack, and performs a
cd
to the new top directory.
Arguments, if supplied, have the following meanings:
-
- +n
-
Removes the nth entry counting from the left of the list
shown by
dirs,
starting with zero. For example:
popd +0
removes the first directory,
popd +1
the second.
- -n
-
Removes the nth entry counting from the right of the list
shown by
dirs,
starting with zero. For example:
popd -0
removes the last directory,
popd -1
the next to last.
- -n
-
Suppresses the normal change of directory when removing directories
from the stack, so that only the stack is manipulated.
If the
popd
command is successful, a
dirs
is performed as well, and the return status is 0.
popd
returns false if an invalid option is encountered, the directory stack
is empty, a non-existent directory stack entry is specified, or the
directory change fails.
- printf [-v var] format [arguments]
-
Write the formatted arguments to the standard output under the
control of the format.
The format is a character string which contains three types of objects:
plain characters, which are simply copied to standard output, character
escape sequences, which are converted and copied to the standard output, and
format specifications, each of which causes printing of the next successive
argument.
In addition to the standard printf(1) formats, %b causes
printf to expand backslash escape sequences in the corresponding
argument (except that \c terminates output, backslashes in
\aq, \", and \? are not removed, and octal escapes
beginning with \0 may contain up to four digits),
and %q causes printf to output the corresponding
argument in a format that can be reused as shell input.
The -v option causes the output to be assigned to the variable
var rather than being printed to the standard output.
The format is reused as necessary to consume all of the arguments.
If the format requires more arguments than are supplied, the
extra format specifications behave as if a zero value or null string, as
appropriate, had been supplied. The return value is zero on success,
non-zero on failure.
- pushd [-n] [dir]
-
- pushd [-n] [+n] [-n]
-
Adds a directory to the top of the directory stack, or rotates
the stack, making the new top of the stack the current working
directory. With no arguments, exchanges the top two directories
and returns 0, unless the directory stack is empty.
Arguments, if supplied, have the following meanings:
-
- +n
-
Rotates the stack so that the nth directory
(counting from the left of the list shown by
dirs,
starting with zero)
is at the top.
- -n
-
Rotates the stack so that the nth directory
(counting from the right of the list shown by
dirs,
starting with zero) is at the top.
- -n
-
Suppresses the normal change of directory when adding directories
to the stack, so that only the stack is manipulated.
- dir
-
Adds
dir
to the directory stack at the top, making it the
new current working directory.
If the
pushd
command is successful, a
dirs
is performed as well.
If the first form is used,
pushd
returns 0 unless the cd to
dir
fails. With the second form,
pushd
returns 0 unless the directory stack is empty,
a non-existent directory stack element is specified,
or the directory change to the specified new current directory
fails.
- pwd [-LP]
-
Print the absolute pathname of the current working directory.
The pathname printed contains no symbolic links if the
-P
option is supplied or the
-o physical
option to the
set
builtin command is enabled.
If the
-L
option is used, the pathname printed may contain symbolic links.
The return status is 0 unless an error occurs while
reading the name of the current directory or an
invalid option is supplied.
- read [-ers] [-u fd] [-t timeout] [-a aname] [-p prompt] [-n nchars] [-d delim] [name ...]
-
One line is read from the standard input, or from the file descriptor
fd supplied as an argument to the -u option, and the first word
is assigned to the first
name,
the second word to the second
name,
and so on, with leftover words and their intervening separators assigned
to the last
name.
If there are fewer words read from the input stream than names,
the remaining names are assigned empty values.
The characters in
IFS
are used to split the line into words.
The backslash character (\) may be used to remove any special
meaning for the next character read and for line continuation.
Options, if supplied, have the following meanings:
-
- -a aname
-
The words are assigned to sequential indices
of the array variable
aname,
starting at 0.
aname
is unset before any new values are assigned.
Other name arguments are ignored.
- -d delim
-
The first character of delim is used to terminate the input line,
rather than newline.
- -e
-
If the standard input
is coming from a terminal,
readline
(see
READLINE
above) is used to obtain the line.
- -n nchars
-
read returns after reading nchars characters rather than
waiting for a complete line of input.
- -p prompt
-
Display prompt on standard error, without a
trailing newline, before attempting to read any input. The prompt
is displayed only if input is coming from a terminal.
- -r
-
Backslash does not act as an escape character.
The backslash is considered to be part of the line.
In particular, a backslash-newline pair may not be used as a line
continuation.
- -s
-
Silent mode. If input is coming from a terminal, characters are
not echoed.
- -t timeout
-
Cause read to time out and return failure if a complete line of
input is not read within timeout seconds.
This option has no effect if read is not reading input from the
terminal or a pipe.
- -u fd
-
Read input from file descriptor fd.
If no
names
are supplied, the line read is assigned to the variable
REPLY.
The return code is zero, unless end-of-file is encountered, read
times out, or an invalid file descriptor is supplied as the argument to
-u.
- readonly [-apf] [name[=word] ...]
-
The given
names are marked readonly; the values of these
names
may not be changed by subsequent assignment.
If the
-f
option is supplied, the functions corresponding to the
names are so
marked.
The
-a
option restricts the variables to arrays.
If no
name
arguments are given, or if the
-p
option is supplied, a list of all readonly names is printed.
The
-p
option causes output to be displayed in a format that
may be reused as input.
If a variable name is followed by =word, the value of
the variable is set to word.
The return status is 0 unless an invalid option is encountered,
one of the
names
is not a valid shell variable name, or
-f
is supplied with a
name
that is not a function.
- return [n]
-
Causes a function to exit with the return value specified by
n.
If
n
is omitted, the return status is that of the last command
executed in the function body. If used outside a function,
but during execution of a script by the
.
(source) command, it causes the shell to stop executing
that script and return either
n
or the exit status of the last command executed within the
script as the exit status of the script. If used outside a
function and not during execution of a script by .,
the return status is false.
Any command associated with the RETURN trap is executed
before execution resumes after the function or script.
- set [--abefhkmnptuvxBCHP] [-o option] [arg ...]
-
Without options, the name and value of each shell variable are displayed
in a format that can be reused as input
for setting or resetting the currently-set variables.
Read-only variables cannot be reset.
In posix mode, only shell variables are listed.
The output is sorted according to the current locale.
When options are specified, they set or unset shell attributes.
Any arguments remaining after the options are processed are treated
as values for the positional parameters and are assigned, in order, to
$1,
$2,
...
$n.
Options, if specified, have the following meanings:
-
- -a
-
Automatically mark variables and functions which are modified or
created for export to the environment of subsequent commands.
- -b
-
Report the status of terminated background jobs
immediately, rather than before the next primary prompt. This is
effective only when job control is enabled.
- -e
-
Exit immediately if a simple command (see
SHELL GRAMMAR
above) exits with a non-zero status.
The shell does not exit if the
command that fails is part of the command list immediately following a
while
or
until
keyword,
part of the test in an
if
statement, part of a
&&
or
||
list, or if the command's return value is
being inverted via
!.
A trap on ERR, if set, is executed before the shell exits.
- -f
-
Disable pathname expansion.
- -h
-
Remember the location of commands as they are looked up for execution.
This is enabled by default.
- -k
-
All arguments in the form of assignment statements
are placed in the environment for a command, not just
those that precede the command name.
- -m
-
Monitor mode. Job control is enabled. This option is on
by default for interactive shells on systems that support
it (see
JOB CONTROL
above). Background processes run in a separate process
group and a line containing their exit status is printed
upon their completion.
- -n
-
Read commands but do not execute them. This may be used to
check a shell script for syntax errors. This is ignored by
interactive shells.
- -o option-name
-
The option-name can be one of the following:
-
- allexport
-
Same as
-a.
- braceexpand
-
Same as
-B.
- emacs
-
Use an emacs-style command line editing interface. This is enabled
by default when the shell is interactive, unless the shell is started
with the
--noediting
option.
- errtrace
-
Same as
-E.
- functrace
-
Same as
-T.
- errexit
-
Same as
-e.
- hashall
-
Same as
-h.
- histexpand
-
Same as
-H.
- history
-
Enable command history, as described above under
HISTORY.
This option is on by default in interactive shells.
- ignoreeof
-
The effect is as if the shell command
IGNOREEOF=10
had been executed
(see
Shell Variables
above).
- keyword
-
Same as
-k.
- monitor
-
Same as
-m.
- noclobber
-
Same as
-C.
- noexec
-
Same as
-n.
- noglob
-
Same as
-f.
nolog
Currently ignored.
- notify
-
Same as
-b.
- nounset
-
Same as
-u.
- onecmd
-
Same as
-t.
- physical
-
Same as
-P.
- pipefail
-
If set, the return value of a pipeline is the value of the last
(rightmost) command to exit with a non-zero status, or zero if all
commands in the pipeline exit successfully.
This option is disabled by default.
- posix
-
Change the behavior of
bash
where the default operation differs
from the POSIX standard to match the standard (posix mode).
- privileged
-
Same as
-p.
- verbose
-
Same as
-v.
- vi
-
Use a vi-style command line editing interface.
- xtrace
-
Same as
-x.
If
-o
is supplied with no option-name, the values of the current options are
printed.
If
+o
is supplied with no option-name, a series of
set
commands to recreate the current option settings is displayed on
the standard output.
- -p
-
Turn on
privileged
mode. In this mode, the
$ENV
and
$BASH_ENV
files are not processed, shell functions are not inherited from the
environment, and the
SHELLOPTS
variable, if it appears in the environment, is ignored.
If the shell is started with the effective user (group) id not equal to the
real user (group) id, and the -p option is not supplied, these actions
are taken and the effective user id is set to the real user id.
If the -p option is supplied at startup, the effective user id is
not reset.
Turning this option off causes the effective user
and group ids to be set to the real user and group ids.
- -t
-
Exit after reading and executing one command.
- -u
-
Treat unset variables as an error when performing
parameter expansion. If expansion is attempted on an
unset variable, the shell prints an error message, and,
if not interactive, exits with a non-zero status.
- -v
-
Print shell input lines as they are read.
- -x
-
After expanding each simple command,
for command, case command, select command, or
arithmetic for command, display the expanded value of
PS4,
followed by the command and its expanded arguments
or associated word list.
- -B
-
The shell performs brace expansion (see
Brace Expansion
above). This is on by default.
- -C
-
If set,
bash
does not overwrite an existing file with the
>,
>&,
and
<>
redirection operators. This may be overridden when
creating output files by using the redirection operator
>|
instead of
>.
- -E
-
If set, any trap on ERR is inherited by shell functions, command
substitutions, and commands executed in a subshell environment.
The ERR trap is normally not inherited in such cases.
- -H
-
Enable
!
style history substitution. This option is on by
default when the shell is interactive.
- -P
-
If set, the shell does not follow symbolic links when executing
commands such as
cd
that change the current working directory. It uses the
physical directory structure instead. By default,
bash
follows the logical chain of directories when performing commands
which change the current directory.
- -T
-
If set, any traps on DEBUG and RETURN are inherited by shell
functions, command substitutions, and commands executed in a
subshell environment.
The DEBUG and RETURN traps are normally not inherited
in such cases.
- --
-
If no arguments follow this option, then the positional parameters are
unset. Otherwise, the positional parameters are set to the
args, even if some of them begin with a
-.
- -
-
Signal the end of options, cause all remaining args to be
assigned to the positional parameters. The
-x
and
-v
options are turned off.
If there are no args,
the positional parameters remain unchanged.
The options are off by default unless otherwise noted.
Using + rather than - causes these options to be turned off.
The options can also be specified as arguments to an invocation of
the shell.
The current set of options may be found in
$-.
The return status is always true unless an invalid option is encountered.
- shift [n]
-
The positional parameters from n+1 ... are renamed to
$1
....
Parameters represented by the numbers $#
down to $#-n+1 are unset.
n
must be a non-negative number less than or equal to $#.
If
n
is 0, no parameters are changed.
If
n
is not given, it is assumed to be 1.
If
n
is greater than $#, the positional parameters are not changed.
The return status is greater than zero if
n
is greater than
$#
or less than zero; otherwise 0.
- shopt [-pqsu] [-o] [optname ...]
-
Toggle the values of variables controlling optional shell behavior.
With no options, or with the
-p
option, a list of all settable options is displayed, with
an indication of whether or not each is set.
The -p option causes output to be displayed in a form that
may be reused as input.
Other options have the following meanings:
-
- -s
-
Enable (set) each optname.
- -u
-
Disable (unset) each optname.
- -q
-
Suppresses normal output (quiet mode); the return status indicates
whether the optname is set or unset.
If multiple optname arguments are given with
-q,
the return status is zero if all optnames are enabled; non-zero
otherwise.
- -o
-
Restricts the values of optname to be those defined for the
-o
option to the
set
builtin.
If either
-s
or
-u
is used with no optname arguments, the display is limited to
those options which are set or unset, respectively.
Unless otherwise noted, the shopt options are disabled (unset)
by default.
The return status when listing options is zero if all optnames
are enabled, non-zero otherwise. When setting or unsetting options,
the return status is zero unless an optname is not a valid shell
option.
The list of shopt options is:
- cdable_vars
-
If set, an argument to the
cd
builtin command that
is not a directory is assumed to be the name of a variable whose
value is the directory to change to.
- cdspell
-
If set, minor errors in the spelling of a directory component in a
cd
command will be corrected.
The errors checked for are transposed characters,
a missing character, and one character too many.
If a correction is found, the corrected file name is printed,
and the command proceeds.
This option is only used by interactive shells.
- checkhash
-
If set, bash checks that a command found in the hash
table exists before trying to execute it. If a hashed command no
longer exists, a normal path search is performed.
- checkwinsize
-
If set, bash checks the window size after each command
and, if necessary, updates the values of
LINES
and
COLUMNS.
- cmdhist
-
If set,
bash
attempts to save all lines of a multiple-line
command in the same history entry. This allows
easy re-editing of multi-line commands.
- dotglob
-
If set,
bash
includes filenames beginning with a `.' in the results of pathname
expansion.
- execfail
-
If set, a non-interactive shell will not exit if
it cannot execute the file specified as an argument to the
exec
builtin command. An interactive shell does not exit if
exec
fails.
- expand_aliases
-
If set, aliases are expanded as described above under
ALIASES.
This option is enabled by default for interactive shells.
- extdebug
-
If set, behavior intended for use by debuggers is enabled:
-
- 1.
-
The -F option to the declare builtin displays the source
file name and line number corresponding to each function name supplied
as an argument.
- 2.
-
If the command run by the DEBUG trap returns a non-zero value, the
next command is skipped and not executed.
- 3.
-
If the command run by the DEBUG trap returns a value of 2, and the
shell is executing in a subroutine (a shell function or a shell script
executed by the . or source builtins), a call to
return is simulated.
- 4.
-
BASH_ARGC and BASH_ARGV are updated as described in their
descriptions above.
- 5.
-
Function tracing is enabled: command substitution, shell functions, and
subshells invoked with ( command ) inherit the
DEBUG and RETURN traps.
- 6.
-
Error tracing is enabled: command substitution, shell functions, and
subshells invoked with ( command ) inherit the
ERROR trap.
- extglob
-
If set, the extended pattern matching features described above under
Pathname Expansion are enabled.
- extquote
-
If set, $aqstringaq and $"string" quoting is
performed within ${parameter} expansions
enclosed in double quotes. This option is enabled by default.
- failglob
-
If set, patterns which fail to match filenames during pathname expansion
result in an expansion error.
- force_fignore
-
If set, the suffixes specified by the FIGNORE shell variable
cause words to be ignored when performing word completion even if
the ignored words are the only possible completions.
See
SHELL VARIABLES
above for a description of FIGNORE.
This option is enabled by default.
- gnu_errfmt
-
If set, shell error messages are written in the standard GNU error
message format.
- histappend
-
If set, the history list is appended to the file named by the value
of the
HISTFILE
variable when the shell exits, rather than overwriting the file.
- histreedit
-
If set, and
readline
is being used, a user is given the opportunity to re-edit a
failed history substitution.
- histverify
-
If set, and
readline
is being used, the results of history substitution are not immediately
passed to the shell parser. Instead, the resulting line is loaded into
the readline editing buffer, allowing further modification.
- hostcomplete
-
If set, and
readline
is being used, bash will attempt to perform hostname completion when a
word containing a @ is being completed (see
Completing
under
READLINE
above).
This is enabled by default.
- huponexit
-
If set, bash will send
SIGHUP
to all jobs when an interactive login shell exits.
- interactive_comments
-
If set, allow a word beginning with
#
to cause that word and all remaining characters on that
line to be ignored in an interactive shell (see
COMMENTS
above). This option is enabled by default.
- lithist
-
If set, and the
cmdhist
option is enabled, multi-line commands are saved to the history with
embedded newlines rather than using semicolon separators where possible.
- login_shell
-
The shell sets this option if it is started as a login shell (see
INVOCATION
above).
The value may not be changed.
- mailwarn
-
If set, and a file that bash is checking for mail has been
accessed since the last time it was checked, the message ``The mail in
mailfile has been read'' is displayed.
- no_empty_cmd_completion
-
If set, and
readline
is being used,
bash
will not attempt to search the PATH for possible completions when
completion is attempted on an empty line.
- nocaseglob
-
If set,
bash
matches filenames in a case-insensitive fashion when performing pathname
expansion (see
Pathname Expansion
above).
- nocasematch
-
If set,
bash
matches patterns in a case-insensitive fashion when performing matching
while executing case or [[ conditional commands.
- nullglob
-
If set,
bash
allows patterns which match no
files (see
Pathname Expansion
above)
to expand to a null string, rather than themselves.
- progcomp
-
If set, the programmable completion facilities (see
Programmable Completion above) are enabled.
This option is enabled by default.
- promptvars
-
If set, prompt strings undergo
parameter expansion, command substitution, arithmetic
expansion, and quote removal after being expanded as described in
PROMPTING
above. This option is enabled by default.
- restricted_shell
-
The shell sets this option if it is started in restricted mode (see
RESTRICTED SHELL
below).
The value may not be changed.
This is not reset when the startup files are executed, allowing
the startup files to discover whether or not a shell is restricted.
- shift_verbose
-
If set, the
shift
builtin prints an error message when the shift count exceeds the
number of positional parameters.
- sourcepath
-
If set, the
source (.) builtin uses the value of
PATH
to find the directory containing the file supplied as an argument.
This option is enabled by default.
- xpg_echo
-
If set, the echo builtin expands backslash-escape sequences
by default.
- suspend [-f]
-
Suspend the execution of this shell until it receives a
SIGCONT
signal. The
-f
option says not to complain if this is
a login shell; just suspend anyway. The return status is 0 unless
the shell is a login shell and
-f
is not supplied, or if job control is not enabled.
- test expr
-
- [ expr ]
-
Return a status of 0 or 1 depending on
the evaluation of the conditional expression
expr.
Each operator and operand must be a separate argument.
Expressions are composed of the primaries described above under
CONDITIONAL EXPRESSIONS.
test does not accept any options, nor does it accept and ignore
an argument of -- as signifying the end of options.
Expressions may be combined using the following operators, listed
in decreasing order of precedence.
-
- ! expr
-
True if
expr
is false.
- ( expr )
-
Returns the value of expr.
This may be used to override the normal precedence of operators.
- expr1 -a expr2
-
True if both
expr1
and
expr2
are true.
- expr1 -o expr2
-
True if either
expr1
or
expr2
is true.
test and [ evaluate conditional
expressions using a set of rules based on the number of arguments.
- 0 arguments
-
The expression is false.
- 1 argument
-
The expression is true if and only if the argument is not null.
- 2 arguments
-
If the first argument is !, the expression is true if and
only if the second argument is null.
If the first argument is one of the unary conditional operators listed above
under
CONDITIONAL EXPRESSIONS,
the expression is true if the unary test is true.
If the first argument is not a valid unary conditional operator, the expression
is false.
- 3 arguments
-
If the second argument is one of the binary conditional operators listed above
under
CONDITIONAL EXPRESSIONS,
the result of the expression is the result of the binary test using
the first and third arguments as operands.
If the first argument is !, the value is the negation of
the two-argument test using the second and third arguments.
If the first argument is exactly ( and the third argument is
exactly ), the result is the one-argument test of the second
argument.
Otherwise, the expression is false.
The -a and -o operators are considered binary operators
in this case.
- 4 arguments
-
If the first argument is !, the result is the negation of
the three-argument expression composed of the remaining arguments.
Otherwise, the expression is parsed and evaluated according to
precedence using the rules listed above.
- 5 or more arguments
-
The expression is parsed and evaluated according to precedence
using the rules listed above.
- times
-
Print the accumulated user and system times for the shell and
for processes run from the shell. The return status is 0.
- trap [-lp] [[arg] sigspec ...]
-
The command
arg
is to be read and executed when the shell receives
signal(s)
sigspec.
If
arg
is absent (and there is a single sigspec) or
-,
each specified signal is
reset to its original disposition (the value it had
upon entrance to the shell).
If
arg
is the null string the signal specified by each
sigspec
is ignored by the shell and by the commands it invokes.
If
arg
is not present and
-p
has been supplied, then the trap commands associated with each
sigspec
are displayed.
If no arguments are supplied or if only
-p
is given,
trap
prints the list of commands associated with each signal.
The
-l
option causes the shell to print a list of signal names and
their corresponding numbers.
Each
sigspec
is either
a signal name defined in <signal.h>, or a signal number.
Signal names are case insensitive and the SIG prefix is optional.
If a
sigspec
is
EXIT
(0) the command
arg
is executed on exit from the shell.
If a
sigspec
is
DEBUG,
the command
arg
is executed before every simple command, for command,
case command, select command, every arithmetic for
command, and before the first command executes in a shell function (see
SHELL GRAMMAR
above).
Refer to the description of the extdebug option to the
shopt builtin for details of its effect on the DEBUG trap.
If a
sigspec
is
ERR,
the command
arg
is executed whenever a simple command has a non-zero exit status,
subject to the following conditions.
The
ERR
trap is not executed if the failed
command is part of the command list immediately following a
while
or
until
keyword,
part of the test in an
if
statement, part of a
&&
or
||
list, or if the command's return value is
being inverted via
!.
These are the same conditions obeyed by the errexit option.
If a
sigspec
is
RETURN,
the command
arg
is executed each time a shell function or a script executed with the
. or source builtins finishes executing.
Signals ignored upon entry to the shell cannot be trapped or reset.
Trapped signals that are not being ignored are reset to their original
values in a child process when it is created.
The return status is false if any
sigspec
is invalid; otherwise
trap
returns true.
- type [-aftpP] name [name ...]
-
With no options,
indicate how each
name
would be interpreted if used as a command name.
If the
-t
option is used,
type
prints a string which is one of
alias,
keyword,
function,
builtin,
or
file
if
name
is an alias, shell reserved word, function, builtin, or disk file,
respectively.
If the
name
is not found, then nothing is printed, and an exit status of false
is returned.
If the
-p
option is used,
type
either returns the name of the disk file
that would be executed if
name
were specified as a command name,
or nothing if
type -t name
would not return
file.
The
-P
option forces a
PATH
search for each name, even if
type -t name
would not return
file.
If a command is hashed,
-p
and
-P
print the hashed value, not necessarily the file that appears
first in
PATH.
If the
-a
option is used,
type
prints all of the places that contain
an executable named
name.
This includes aliases and functions,
if and only if the
-p
option is not also used.
The table of hashed commands is not consulted
when using
-a.
The
-f
option suppresses shell function lookup, as with the command builtin.
type
returns true if any of the arguments are found, false if
none are found.
- ulimit [-SHacdefilmnpqrstuvx [limit]]
-
Provides control over the resources available to the shell and to
processes started by it, on systems that allow such control.
The -H and -S options specify that the hard or soft limit is
set for the given resource. A hard limit cannot be increased once it
is set; a soft limit may be increased up to the value of the hard limit.
If neither -H nor -S is specified, both the soft and hard
limits are set.
The value of
limit
can be a number in the unit specified for the resource
or one of the special values
hard,
soft,
or
unlimited,
which stand for the current hard limit, the current soft limit, and
no limit, respectively.
If
limit
is omitted, the current value of the soft limit of the resource is
printed, unless the -H option is given. When more than one
resource is specified, the limit name and unit are printed before the value.
Other options are interpreted as follows:
-
- -a
-
All current limits are reported
- -c
-
The maximum size of core files created
- -d
-
The maximum size of a process's data segment
- -e
-
The maximum scheduling priority ("nice")
- -f
-
The maximum size of files written by the shell and its children
- -i
-
The maximum number of pending signals
- -l
-
The maximum size that may be locked into memory
- -m
-
The maximum resident set size
- -n
-
The maximum number of open file descriptors (most systems do not
allow this value to be set)
- -p
-
The pipe size in 512-byte blocks (this may not be set)
- -q
-
The maximum number of bytes in POSIX message queues
- -r
-
The maximum real-time scheduling priority
- -s
-
The maximum stack size
- -t
-
The maximum amount of cpu time in seconds
- -u
-
The maximum number of processes available to a single user
- -v
-
The maximum amount of virtual memory available to the shell
- -x
-
The maximum number of file locks
If
limit
is given, it is the new value of the specified resource (the
-a
option is display only).
If no option is given, then
-f
is assumed. Values are in 1024-byte increments, except for
-t,
which is in seconds,
-p,
which is in units of 512-byte blocks,
and
-n
and
-u,
which are unscaled values.
The return status is 0 unless an invalid option or argument is supplied,
or an error occurs while setting a new limit.
- umask [-p] [-S] [mode]
-
The user file-creation mask is set to
mode.
If
mode
begins with a digit, it
is interpreted as an octal number; otherwise
it is interpreted as a symbolic mode mask similar
to that accepted by
chmod(1).
If
mode
is omitted, the current value of the mask is printed.
The
-S
option causes the mask to be printed in symbolic form; the
default output is an octal number.
If the
-p
option is supplied, and
mode
is omitted, the output is in a form that may be reused as input.
The return status is 0 if the mode was successfully changed or if
no mode argument was supplied, and false otherwise.
- unalias [-a] [name ...]
-
Remove each name from the list of defined aliases. If
-a
is supplied, all alias definitions are removed. The return
value is true unless a supplied
name
is not a defined alias.
- unset [-fv] [name ...]
-
For each
name,
remove the corresponding variable or function.
If no options are supplied, or the
-v
option is given, each
name
refers to a shell variable.
Read-only variables may not be unset.
If
-f
is specified, each
name
refers to a shell function, and the function definition
is removed.
Each unset variable or function is removed from the environment
passed to subsequent commands.
If any of
RANDOM,
SECONDS,
LINENO,
HISTCMD,
FUNCNAME,
GROUPS,
or
DIRSTACK
are unset, they lose their special properties, even if they are
subsequently reset. The exit status is true unless a
name
is readonly.
- wait [n ...]
-
Wait for each specified process and return its termination status.
Each
n
may be a process
ID or a job specification; if a job spec is given, all processes
in that job's pipeline are waited for. If
n
is not given, all currently active child processes
are waited for, and the return status is zero. If
n
specifies a non-existent process or job, the return status is
127. Otherwise, the return status is the exit status of the last
process or job waited for.
RESTRICTED SHELL
If
bash
is started with the name
rbash,
or the
-r
option is supplied at invocation,
the shell becomes restricted.
A restricted shell is used to
set up an environment more controlled than the standard shell.
It behaves identically to
bash
with the exception that the following are disallowed or not performed:
- *
-
changing directories with cd
- *
-
setting or unsetting the values of
SHELL,
PATH,
ENV,
or
BASH_ENV
- *
-
specifying command names containing
/
- *
-
specifying a file name containing a
/
as an argument to the
.
builtin command
- *
-
Specifying a filename containing a slash as an argument to the
-p
option to the
hash
builtin command
- *
-
importing function definitions from the shell environment at startup
- *
-
parsing the value of SHELLOPTS from the shell environment at startup
- *
-
redirecting output using the >, >|, <>, >&, &>, and >> redirection operators
- *
-
using the
exec
builtin command to replace the shell with another command
- *
-
adding or deleting builtin commands with the
-f
and
-d
options to the
enable
builtin command
- *
-
Using the enable builtin command to enable disabled shell builtins
- *
-
specifying the
-p
option to the
command
builtin command
- *
-
turning off restricted mode with
set +r or set +o restricted.
These restrictions are enforced after any startup files are read.
When a command that is found to be a shell script is executed
(see
COMMAND EXECUTION
above),
rbash
turns off any restrictions in the shell spawned to execute the
script.
SEE ALSO
- Bash Reference Manual, Brian Fox and Chet Ramey
-
- The Gnu Readline Library, Brian Fox and Chet Ramey
-
- The Gnu History Library, Brian Fox and Chet Ramey
-
- Portable Operating System Interface (POSIX) Part 2: Shell and Utilities, IEEE
-
- sh(1), ksh(1), csh(1)
-
- emacs(1), vi(1)
-
- readline(3)
-
FILES
-
/bin/bash
-
The bash executable
-
/etc/profile
-
The systemwide initialization file, executed for login shells
-
~/.bash_profile
-
The personal initialization file, executed for login shells
-
~/.bashrc
-
The individual per-interactive-shell startup file
-
~/.bash_logout
-
The individual login shell cleanup file, executed when a login shell exits
-
~/.inputrc
-
Individual readline initialization file
AUTHORS
Brian Fox, Free Software Foundation
bfox@gnu.org
Chet Ramey, Case Western Reserve University
chet@po.cwru.edu
BUG REPORTS
If you find a bug in
bash,
you should report it. But first, you should
make sure that it really is a bug, and that it appears in the latest
version of
bash.
The latest version is always available from
ftp://ftp.gnu.org/pub/bash/.
Once you have determined that a bug actually exists, use the
bashbug
command to submit a bug report.
If you have a fix, you are encouraged to mail that as well!
Suggestions and `philosophical' bug reports may be mailed
to bug-bash@gnu.org or posted to the Usenet
newsgroup
gnu.bash.bug.
ALL bug reports should include:
- The version number of bash
-
- The hardware and operating system
-
- The compiler used to compile
-
- A description of the bug behaviour
-
- A short script or `recipe' which exercises the bug
-
bashbug
inserts the first three items automatically into the template
it provides for filing a bug report.
Comments and bug reports concerning
this manual page should be directed to
chet@po.cwru.edu.
BUGS
It's too big and too slow.
There are some subtle differences between
bash
and traditional versions of
sh,
mostly because of the
POSIX
specification.
Aliases are confusing in some uses.
Shell builtin commands and functions are not stoppable/restartable.
Compound commands and command sequences of the form `a ; b ; c'
are not handled gracefully when process suspension is attempted.
When a process is stopped, the shell immediately executes the next
command in the sequence.
It suffices to place the sequence of commands between
parentheses to force it into a subshell, which may be stopped as
a unit.
Commands inside of $(...) command substitution are not
parsed until substitution is attempted. This will delay error
reporting until some time after the command is entered. For example,
unmatched parentheses, even inside shell comments, will result in
error messages while the construct is being read.
Array variables may not (yet) be exported.
GNU Bash-3.2 | 2006 September 28 | BASH(1)
|
Index
- NAME
-
- SYNOPSIS
-
- COPYRIGHT
-
- DESCRIPTION
-
- OPTIONS
-
- ARGUMENTS
-
- INVOCATION
-
- DEFINITIONS
-
- RESERVED WORDS
-
- SHELL GRAMMAR
-
- Simple Commands
-
- Pipelines
-
- Lists
-
- Compound Commands
-
- Shell Function Definitions
-
- COMMENTS
-
- QUOTING
-
- PARAMETERS
-
- Positional Parameters
-
- Special Parameters
-
- Shell Variables
-
- Arrays
-
- EXPANSION
-
- Brace Expansion
-
- Tilde Expansion
-
- Parameter Expansion
-
- Command Substitution
-
- Arithmetic Expansion
-
- Process Substitution
-
- Word Splitting
-
- Pathname Expansion
-
- Quote Removal
-
- REDIRECTION
-
- Redirecting Input
-
- Redirecting Output
-
- Appending Redirected Output
-
- Redirecting Standard Output and Standard Error
-
- Here Documents
-
- Here Strings
-
- Duplicating File Descriptors
-
- Moving File Descriptors
-
- Opening File Descriptors for Reading and Writing
-
- ALIASES
-
- FUNCTIONS
-
- ARITHMETIC EVALUATION
-
- CONDITIONAL EXPRESSIONS
-
- SIMPLE COMMAND EXPANSION
-
- COMMAND EXECUTION
-
- COMMAND EXECUTION ENVIRONMENT
-
- ENVIRONMENT
-
- EXIT STATUS
-
- SIGNALS
-
- JOB CONTROL
-
- PROMPTING
-
- READLINE
-
- Readline Notation
-
- Readline Initialization
-
- Readline Key Bindings
-
- Readline Variables
-
- Readline Conditional Constructs
-
- Searching
-
- Readline Command Names
-
- Commands for Moving
-
- Commands for Manipulating the History
-
- Commands for Changing Text
-
- Killing and Yanking
-
- Numeric Arguments
-
- Completing
-
- Keyboard Macros
-
- Miscellaneous
-
- Programmable Completion
-
- HISTORY
-
- HISTORY EXPANSION
-
- Event Designators
-
- Word Designators
-
- Modifiers
-
- SHELL BUILTIN COMMANDS
-
- RESTRICTED SHELL
-
- SEE ALSO
-
- FILES
-
- AUTHORS
-
- BUG REPORTS
-
- BUGS
-
This document was created by man2html from bash.1.
Time: 03 October 2006 08:54:31 EDT
|