Software: Apache/2.2.3 (CentOS). PHP/5.1.6 uname -a: Linux mx-ll-110-164-51-230.static.3bb.co.th 2.6.18-194.el5PAE #1 SMP Fri Apr 2 15:37:44 uid=48(apache) gid=48(apache) groups=48(apache) Safe-mode: OFF (not secure) /usr/libexec/webmin/ drwxr-xr-x |
Viewing file: Select action/file-type: #!/bin/sh # setup.sh # This script should be run after the webmin archive is unpacked, in order # to setup the various config files # Find install directory LANG= export LANG cd `dirname $0` if [ -x /bin/pwd ]; then wadir=`/bin/pwd` else wadir=`pwd`; fi srcdir=$wadir ver=`cat "$wadir/version"` # Find temp directory if [ "$tempdir" = "" ]; then tempdir=/tmp/.webmin fi if [ $? != "0" ]; then echo "ERROR: Cannot find the Webmin install directory"; echo ""; exit 1; fi echo "***********************************************************************" echo "* Welcome to the Webmin setup script, version $ver *" echo "***********************************************************************" echo "Webmin is a web-based interface that allows Unix-like operating" echo "systems and common Unix services to be easily administered." echo "" # Only root can run this id | grep "uid=0(" >/dev/null if [ $? != "0" ]; then uname -a | grep -i CYGWIN >/dev/null if [ $? != "0" ]; then echo "ERROR: The Webmin install script must be run as root"; echo ""; exit 1; fi fi # Use the supplied destination directory, if any if [ "$1" != "" ]; then wadir=$1 echo "Installing Webmin from $srcdir to $wadir ..." if [ ! -d "$wadir" ]; then mkdir "$wadir" if [ "$?" != "0" ]; then echo "ERROR: Failed to create $wadir" echo "" exit 1 fi else # Make sure dest dir is not in use ls "$wadir" | grep -v rpmsave >/dev/null 2>&1 if [ "$?" = "0" -a ! -r "$wadir/setup.sh" ]; then echo "ERROR: Installation directory $wadir contains other files" echo "" exit 1 fi fi else echo "Installing Webmin in $wadir ..." fi cd "$wadir" # Work out perl library path PERLLIB=$wadir if [ "$perllib" != "" ]; then PERLLIB="$PERLLIB:$perllib" fi # Validate source directory allmods=`cd "$srcdir"; echo */module.info | sed -e 's/\/module.info//g'` if [ "$allmods" = "" ]; then echo "ERROR: Failed to get module list" echo "" exit 1 fi echo "" # Load package-defined variable overrides if [ -r "$srcdir/setup-pre.sh" ]; then . "$srcdir/setup-pre.sh" fi # Ask for webmin config directory echo "***********************************************************************" echo "Webmin uses separate directories for configuration files and log files." echo "Unless you want to run multiple versions of Webmin at the same time" echo "you can just accept the defaults." echo "" printf "Config file directory [/etc/webmin]: " if [ "$config_dir" = "" ]; then read config_dir fi if [ "$config_dir" = "" ]; then config_dir=/etc/webmin fi abspath=`echo $config_dir | grep "^/"` if [ "$abspath" = "" ]; then echo "Config directory must be an absolute path" echo "" exit 2 fi if [ ! -d $config_dir ]; then mkdir $config_dir; if [ $? != 0 ]; then echo "ERROR: Failed to create directory $config_dir" echo "" exit 2 fi fi if [ -r "$config_dir/config" ]; then echo "Found existing Webmin configuration in $config_dir" echo "" upgrading=1 fi # Check if upgrading from an old version if [ "$upgrading" = 1 ]; then echo "" # Get current var path var_dir=`cat $config_dir/var-path` # Force creation if non-existant mkdir -p $var_dir >/dev/null 2>&1 # Get current perl path perl=`cat $config_dir/perl-path` # Create temp files directory $perl "$srcdir/maketemp.pl" if [ "$?" != "0" ]; then echo "ERROR: Failed to create or check temp files directory $tempdir" echo "" exit 2 fi # Get old os name and version os_type=`grep "^os_type=" $config_dir/config | sed -e 's/os_type=//g'` os_version=`grep "^os_version=" $config_dir/config | sed -e 's/os_version=//g'` real_os_type=`grep "^real_os_type=" $config_dir/config | sed -e 's/real_os_type=//g'` real_os_version=`grep "^real_os_version=" $config_dir/config | sed -e 's/real_os_version=//g'` # Get old root, host, port, ssl and boot flag oldwadir=`grep "^root=" $config_dir/miniserv.conf | sed -e 's/root=//g'` port=`grep "^port=" $config_dir/miniserv.conf | sed -e 's/port=//g'` ssl=`grep "^ssl=" $config_dir/miniserv.conf | sed -e 's/ssl=//g'` atboot=`grep "^atboot=" $config_dir/miniserv.conf | sed -e 's/atboot=//g'` inetd=`grep "^inetd=" $config_dir/miniserv.conf | sed -e 's/inetd=//g'` if [ "$inetd" != "1" ]; then # Stop old version $config_dir/stop >/dev/null 2>&1 fi # Copy files to target directory if [ "$wadir" != "$srcdir" ]; then echo "Copying files to $wadir .." (cd "$srcdir" ; tar cf - . | (cd "$wadir" ; tar xf -)) echo "..done" echo "" fi # Update ACLs $perl "$wadir/newmods.pl" $config_dir $allmods # Update miniserv.conf with new root directory and mime types file grep -v "^root=" $config_dir/miniserv.conf | grep -v "^mimetypes=" | grep -v "^server=" >$tempdir/$$.miniserv.conf if [ $? != "0" ]; then exit 1; fi mv $tempdir/$$.miniserv.conf $config_dir/miniserv.conf echo "root=$wadir" >> $config_dir/miniserv.conf echo "mimetypes=$wadir/mime.types" >> $config_dir/miniserv.conf echo "server=MiniServ/$ver" >> $config_dir/miniserv.conf grep logout= $config_dir/miniserv.conf >/dev/null if [ $? != "0" ]; then echo "logout=$config_dir/logout-flag" >> $config_dir/miniserv.conf fi # Check for third-party modules in old version if [ "$wadir" != "$oldwadir" ]; then echo "Checking for third-party modules .." if [ "$webmin_upgrade" != "" ]; then autothird=1 fi $perl "$wadir/thirdparty.pl" "$wadir" "$oldwadir" $autothird echo "..done" echo "" fi # Remove old cache of module infos rm -f $config_dir/module.infos.cache else # Config directory exists .. make sure it is not in use ls $config_dir | grep -v rpmsave >/dev/null 2>&1 if [ "$?" = "0" -a "$config_dir" != "/etc/webmin" ]; then echo "ERROR: Config directory $config_dir is not empty" echo "" exit 2 fi # Ask for log directory printf "Log file directory [/var/webmin]: " if [ "$var_dir" = "" ]; then read var_dir fi if [ "$var_dir" = "" ]; then var_dir=/var/webmin fi abspath=`echo $var_dir | grep "^/"` if [ "$abspath" = "" ]; then echo "Log file directory must be an absolute path" echo "" exit 3 fi if [ "$var_dir" = "/" ]; then echo "Log directory cannot be /" exit "" exit 3 fi if [ ! -d $var_dir ]; then mkdir $var_dir if [ $? != 0 ]; then echo "ERROR: Failed to create directory $var_dir" echo "" exit 3 fi fi echo "" # Ask where perl is installed echo "***********************************************************************" echo "Webmin is written entirely in Perl. Please enter the full path to the" echo "Perl 5 interpreter on your system." echo "" if [ -x /usr/bin/perl ]; then perldef=/usr/bin/perl elif [ -x /usr/local/bin/perl ]; then perldef=/usr/local/bin/perl else perldef="" fi if [ "$perl" = "" ]; then if [ "$perldef" = "" ]; then printf "Full path to perl: " read perl if [ "$perl" = "" ]; then echo "ERROR: No path entered!" echo "" exit 4 fi else printf "Full path to perl (default $perldef): " read perl if [ "$perl" = "" ]; then perl=$perldef fi fi fi echo "" # Test perl echo "Testing Perl ..." if [ ! -x $perl ]; then echo "ERROR: Failed to find perl at $perl" echo "" exit 5 fi $perl -e 'print "foobar\n"' 2>/dev/null | grep foobar >/dev/null if [ $? != "0" ]; then echo "ERROR: Failed to run test perl script. Maybe $perl is" echo "not the perl interpreter, or is not installed properly" echo "" exit 6 fi $perl -e 'exit ($] < 5.002 ? 1 : 0)' if [ $? = "1" ]; then echo "ERROR: Detected old perl version. Webmin requires" echo "perl 5.002 or better to run" echo "" exit 7 fi $perl -e 'use Socket; print "foobar\n"' 2>/dev/null | grep foobar >/dev/null if [ $? != "0" ]; then echo "ERROR: Perl Socket module not installed. Maybe Perl has" echo "not been properly installed on your system" echo "" exit 8 fi $perl -e '$c = crypt("xx", "yy"); exit($c ? 0 : 1)' if [ $? != "0" ]; then $perl -e 'use Crypt::UnixCrypt' >/dev/null 2>&1 fi if [ $? != "0" ]; then echo "ERROR: Perl crypt function does not work. Maybe Perl has" echo "not been properly installed on your system" echo "" exit 8 fi echo "Perl seems to be installed ok" echo "" # Create temp files directory $perl "$srcdir/maketemp.pl" if [ "$?" != "0" ]; then echo "ERROR: Failed to create or check temp files directory $tempdir" echo "" exit 2 fi # Ask for operating system type echo "***********************************************************************" if [ "$os_type" = "" ]; then if [ "$autoos" = "" ]; then autoos=2 fi $perl "$srcdir/oschooser.pl" "$srcdir/os_list.txt" $tempdir/$$.os $autoos if [ $? != 0 ]; then exit $? fi . $tempdir/$$.os rm -f $tempdir/$$.os fi echo "Operating system name: $real_os_type" echo "Operating system version: $real_os_version" echo "" # Ask for web server port, name and password echo "***********************************************************************" echo "Webmin uses its own password protected web server to provide access" echo "to the administration programs. The setup script needs to know :" echo " - What port to run the web server on. There must not be another" echo " web server already using this port." echo " - The login name required to access the web server." echo " - The password required to access the web server." echo " - If the webserver should use SSL (if your system supports it)." echo " - Whether to start webmin at boot time." echo "" printf "Web server port (default 10000): " if [ "$port" = "" ]; then read port if [ "$port" = "" ]; then port=10000 fi fi if [ $port -lt 1 ]; then echo "ERROR: $port is not a valid port number" echo "" exit 11 fi if [ $port -gt 65535 ]; then echo "ERROR: $port is not a valid port number. Port numbers cannot be" echo " greater than 65535" echo "" exit 12 fi $perl -e 'use Socket; socket(FOO, PF_INET, SOCK_STREAM, getprotobyname("tcp")); setsockopt(FOO, SOL_SOCKET, SO_REUSEADDR, pack("l", 1)); bind(FOO, pack_sockaddr_in($ARGV[0], INADDR_ANY)) || exit(1); exit(0);' $port if [ $? != "0" ]; then echo "ERROR: TCP port $port is already in use by another program" echo "" exit 13 fi printf "Login name (default admin): " if [ "$login" = "" ]; then read login if [ "$login" = "" ]; then login="admin" fi fi echo "$login" | grep : >/dev/null if [ "$?" = "0" ]; then echo "ERROR: Username contains a : character" echo "" exit 14 fi echo $login | grep " " >/dev/null if [ "$?" = "0" ]; then echo "ERROR: Username contains a space" echo "" exit 14 fi if [ "$login" = "webmin" ]; then echo "ERROR: Username 'webmin' is reserved for internal use" echo "" exit 14 fi printf "Login password: " if [ "$password" = "" -a "$crypt" = "" ]; then stty -echo read password stty echo printf "\n" printf "Password again: " stty -echo read password2 stty echo printf "\n" if [ "$password" != "$password2" ]; then echo "ERROR: Passwords don't match" echo "" exit 14 fi echo $password | grep : >/dev/null if [ "$?" = "0" ]; then echo "ERROR: Password contains a : character" echo "" exit 14 fi fi # Ask the user if SSL should be used if [ "$ssl" = "" ]; then ssl=0 $perl -e 'use Net::SSLeay' >/dev/null 2>/dev/null if [ $? = "0" ]; then printf "Use SSL (y/n): " read sslyn if [ "$sslyn" = "y" -o "$sslyn" = "Y" ]; then ssl=1 fi else echo "The Perl SSLeay library is not installed. SSL not available." rm -f core fi fi # Don't use SSL if missing Net::SSLeay if [ "$ssl" = "1" ]; then $perl -e 'use Net::SSLeay' >/dev/null 2>/dev/null if [ $? != "0" ]; then ssl=0 fi fi # Ask whether to run at boot time if [ "$atboot" = "" ]; then initsupp=`grep "^os_support=" "$srcdir/init/module.info" | sed -e 's/os_support=//g' | grep $os_type` atboot=0 if [ "$initsupp" != "" ]; then printf "Start Webmin at boot time (y/n): " read atbootyn if [ "$atbootyn" = "y" -o "$atbootyn" = "Y" ]; then atboot=1 makeboot=1 fi else echo "Webmin does not support being started at boot time on your system." fi fi # Copy files to target directory echo "***********************************************************************" if [ "$wadir" != "$srcdir" ]; then echo "Copying files to $wadir .." (cd "$srcdir" ; tar cf - . | (cd "$wadir" ; tar xf -)) echo "..done" echo "" fi # Create webserver config file echo $perl > $config_dir/perl-path echo $var_dir > $config_dir/var-path echo "Creating web server config files.." cfile=$config_dir/miniserv.conf echo "port=$port" >> $cfile echo "root=$wadir" >> $cfile echo "mimetypes=$wadir/mime.types" >> $cfile echo "addtype_cgi=internal/cgi" >> $cfile echo "realm=Webmin Server" >> $cfile echo "logfile=$var_dir/miniserv.log" >> $cfile echo "errorlog=$var_dir/miniserv.error" >> $cfile echo "pidfile=$var_dir/miniserv.pid" >> $cfile echo "logtime=168" >> $cfile echo "ppath=$ppath" >> $cfile echo "ssl=$ssl" >> $cfile echo "env_WEBMIN_CONFIG=$config_dir" >> $cfile echo "env_WEBMIN_VAR=$var_dir" >> $cfile echo "atboot=$atboot" >> $cfile echo "logout=$config_dir/logout-flag" >> $cfile if [ "$listen" != "" ]; then echo "listen=$listen" >> $cfile else echo "listen=10000" >> $cfile fi echo "denyfile=\\.pl\$" >> $cfile echo "log=1" >> $cfile echo "blockhost_failures=5" >> $cfile echo "blockhost_time=60" >> $cfile echo "syslog=1" >> $cfile if [ "$allow" != "" ]; then echo "allow=$allow" >> $cfile fi if [ "$session" != "" ]; then echo "session=$session" >> $cfile else echo "session=1" >> $cfile fi if [ "$pam" != "" ]; then echo "pam=$pam" >> $cfile fi echo premodules=WebminCore >> $cfile echo "server=MiniServ/$ver" >> $cfile # Append package-specific info to config file if [ -r "$wadir/miniserv-conf" ]; then cat "$wadir/miniserv-conf" >>$cfile fi md5pass=`$perl -e 'print crypt("test", "\\$1\\$A9wB3O18\\$zaZgqrEmb9VNltWTL454R/") eq "\\$1\\$A9wB3O18\\$zaZgqrEmb9VNltWTL454R/" ? "1\n" : "0\n"'` ufile=$config_dir/miniserv.users if [ "$crypt" != "" ]; then echo "$login:$crypt:0" > $ufile else if [ "$md5pass" = "1" ]; then $perl -e 'print "$ARGV[0]:",crypt($ARGV[1], "\$1\$XXXXXXXX"),":0\n"' "$login" "$password" > $ufile else $perl -e 'print "$ARGV[0]:",crypt($ARGV[1], "XX"),":0\n"' "$login" "$password" > $ufile fi fi chmod 600 $ufile echo "userfile=$ufile" >> $cfile kfile=$config_dir/miniserv.pem openssl version >/dev/null 2>&1 if [ "$?" = "0" ]; then # We can generate a new SSL key for this host host=`hostname` openssl req -newkey rsa:2048 -x509 -nodes -out $tempdir/cert -keyout $tempdir/key -days 1825 >/dev/null 2>&1 <<EOF . . . Webmin Webserver on $host . * root@$host EOF if [ "$?" = "0" ]; then cat $tempdir/cert $tempdir/key >$kfile fi rm -f $tempdir/cert $tempdir/key fi if [ ! -r $kfile ]; then # Fall back to the built-in key cp "$wadir/miniserv.pem" $kfile fi chmod 600 $kfile echo "keyfile=$config_dir/miniserv.pem" >> $cfile chmod 600 $cfile echo "..done" echo "" echo "Creating access control file.." afile=$config_dir/webmin.acl rm -f $afile if [ "$defaultmods" = "" ]; then echo "$login: $allmods" >> $afile else echo "$login: $defaultmods" >> $afile fi chmod 600 $afile echo "..done" echo "" if [ "$login" != "root" -a "$login" != "admin" ]; then # Allow use of RPC by this user echo rpc=1 >>$config_dir/$login.acl fi fi if [ "$noperlpath" = "" ]; then echo "Inserting path to perl into scripts.." (find "$wadir" -name '*.cgi' -print ; find "$wadir" -name '*.pl' -print) | $perl "$wadir/perlpath.pl" $perl - echo "..done" echo "" fi echo "Creating start and stop scripts.." rm -f $config_dir/stop $config_dir/start $config_dir/restart $config_dir/reload echo "#!/bin/sh" >>$config_dir/start echo "echo Starting Webmin server in $wadir" >>$config_dir/start echo "trap '' 1" >>$config_dir/start echo "LANG=" >>$config_dir/start echo "export LANG" >>$config_dir/start echo "#PERLIO=:raw" >>$config_dir/start echo "unset PERLIO" >>$config_dir/start echo "export PERLIO" >>$config_dir/start echo "PERLLIB=$PERLLIB" >>$config_dir/start echo "export PERLLIB" >>$config_dir/start uname -a | grep -i 'HP/*UX' >/dev/null if [ $? = "0" ]; then echo "exec '$wadir/miniserv.pl' $config_dir/miniserv.conf &" >>$config_dir/start else echo "exec '$wadir/miniserv.pl' $config_dir/miniserv.conf" >>$config_dir/start fi echo "#!/bin/sh" >>$config_dir/stop echo "echo Stopping Webmin server in $wadir" >>$config_dir/stop echo "pidfile=\`grep \"^pidfile=\" $config_dir/miniserv.conf | sed -e 's/pidfile=//g'\`" >>$config_dir/stop echo "kill \`cat \$pidfile\`" >>$config_dir/stop echo "#!/bin/sh" >>$config_dir/restart echo "$config_dir/stop && $config_dir/start" >>$config_dir/restart echo "#!/bin/sh" >>$config_dir/reload echo "echo Reloading Webmin server in $wadir" >>$config_dir/reload echo "pidfile=\`grep \"^pidfile=\" $config_dir/miniserv.conf | sed -e 's/pidfile=//g'\`" >>$config_dir/reload echo "kill -USR1 \`cat \$pidfile\`" >>$config_dir/reload chmod 755 $config_dir/start $config_dir/stop $config_dir/restart $config_dir/reload echo "..done" echo "" if [ "$upgrading" = 1 ]; then echo "Updating config files.." else echo "Copying config files.." fi newmods=`$perl "$wadir/copyconfig.pl" "$os_type/$real_os_type" "$os_version/$real_os_version" "$wadir" $config_dir "" $allmods` if [ "$upgrading" != 1 ]; then # Store the OS and version echo "os_type=$os_type" >> $config_dir/config echo "os_version=$os_version" >> $config_dir/config echo "real_os_type=$real_os_type" >> $config_dir/config echo "real_os_version=$real_os_version" >> $config_dir/config if [ -r /etc/system.cnf ]; then # Found a caldera system config file .. get the language source /etc/system.cnf if [ "$CONF_LST_LANG" = "us" ]; then CONF_LST_LANG=en elif [ "$CONF_LST_LANG" = "uk" ]; then CONF_LST_LANG=en fi grep "lang=$CONF_LST_LANG," "$wadir/lang_list.txt" >/dev/null 2>&1 if [ "$?" = 0 ]; then echo "lang=$CONF_LST_LANG" >> $config_dir/config fi fi # Turn on logging by default echo "log=1" >> $config_dir/config # Use licence module specified by environment variable if [ "$licence_module" != "" ]; then echo licence_module=$licence_module >>$config_dir/config fi # Disallow unknown referers by default echo "referers_none=1" >>$config_dir/config else # one-off hack to set log variable in config from miniserv.conf grep log= $config_dir/config >/dev/null if [ "$?" = "1" ]; then grep log= $config_dir/miniserv.conf >> $config_dir/config grep logtime= $config_dir/miniserv.conf >> $config_dir/config grep logclear= $config_dir/miniserv.conf >> $config_dir/config fi # Disallow unknown referers if not set grep referers_none= $config_dir/config >/dev/null if [ "$?" != "0" ]; then echo "referers_none=1" >>$config_dir/config fi fi echo $ver > $config_dir/version echo "..done" echo "" # Set passwd_ fields in miniserv.conf from global config for field in passwd_file passwd_uindex passwd_pindex passwd_cindex passwd_mindex; do grep $field= $config_dir/miniserv.conf >/dev/null if [ "$?" != "0" ]; then grep $field= $config_dir/config >> $config_dir/miniserv.conf fi done grep passwd_mode= $config_dir/miniserv.conf >/dev/null if [ "$?" != "0" ]; then echo passwd_mode=0 >> $config_dir/miniserv.conf fi # If Perl crypt supports MD5, then make it the default if [ "$md5pass" = "1" ]; then echo md5pass=1 >> $config_dir/config fi # Set a special theme if none was set before if [ "$theme" = "" ]; then theme=`cat "$wadir/defaulttheme" 2>/dev/null` fi oldthemeline=`grep "^theme=" $config_dir/config` oldtheme=`echo $oldthemeline | sed -e 's/theme=//g'` if [ "$theme" != "" ] && [ "$oldthemeline" = "" ] && [ -d "$wadir/$theme" ]; then themelist=$theme fi # Set a special overlay if none was set before if [ "$overlay" = "" ]; then overlay=`cat "$wadir/defaultoverlay" 2>/dev/null` fi if [ "$overlay" != "" ] && [ "$theme" != "" ] && [ -d "$wadir/$overlay" ]; then themelist="$themelist $overlay" fi # Apply the theme and maybe overlay if [ "$themelist" != "" ]; then echo "theme=$themelist" >> $config_dir/config echo "preroot=$themelist" >> $config_dir/miniserv.conf fi # Set the product field in the global config grep product= $config_dir/config >/dev/null if [ "$?" != "0" ]; then echo product=webmin >> $config_dir/config fi if [ "$makeboot" = "1" ]; then echo "Configuring Webmin to start at boot time.." (cd "$wadir/init" ; WEBMIN_CONFIG=$config_dir WEBMIN_VAR=$var_dir "$wadir/init/atboot.pl" $bootscript) echo "..done" echo "" fi # If password delays are not specifically disabled, enable them grep passdelay= $config_dir/miniserv.conf >/dev/null if [ "$?" != "0" ]; then echo passdelay=1 >> $config_dir/miniserv.conf fi if [ "$nouninstall" = "" ]; then echo "Creating uninstall script $config_dir/uninstall.sh .." cat >$config_dir/uninstall.sh <<EOF #!/bin/sh printf "Are you sure you want to uninstall Webmin? (y/n) : " read answer printf "\n" if [ "\$answer" = "y" ]; then $config_dir/stop echo "Running uninstall scripts .." (cd "$wadir" ; WEBMIN_CONFIG=$config_dir WEBMIN_VAR=$var_dir LANG= "$wadir/run-uninstalls.pl") echo "Deleting $wadir .." rm -rf "$wadir" echo "Deleting $config_dir .." rm -rf "$config_dir" echo "Done!" fi EOF chmod +x $config_dir/uninstall.sh echo "..done" echo "" fi echo "Changing ownership and permissions .." # Make all config dirs non-world-readable for m in $newmods; do chown -R root $config_dir/$m chgrp -R bin $config_dir/$m chmod -R og-rw $config_dir/$m done # Make miniserv config files non-world-readable for f in miniserv.conf miniserv.pem miniserv.users; do chown -R root $config_dir/$f chgrp -R bin $config_dir/$f chmod -R og-rw $config_dir/$f done chmod +r $config_dir/version if [ "$nochown" = "" ]; then # Make program directory non-world-writable, but executable chown -R root "$wadir" chgrp -R bin "$wadir" chmod -R og-w "$wadir" chmod -R a+rx "$wadir" fi if [ $var_dir != "/var" -a "$upgrading" != 1 ]; then # Make log directory non-world-readable or writable chown -R root $var_dir chgrp -R bin $var_dir chmod -R og-rwx $var_dir fi # Fix up bad permissions from some older installs for m in ldap-client ldap-server ldap-useradmin mailboxes mysql postgresql servers virtual-server; do if [ -d "$config_dir/$m" ]; then chown root $config_dir/$m chgrp bin $config_dir/$m chmod og-rw $config_dir/$m chmod og-rw $config_dir/$m/config 2>/dev/null fi done echo "..done" echo "" # Save target directory if one was specified if [ "$wadir" != "$srcdir" ]; then echo $wadir >$config_dir/install-dir else rm -f $config_dir/install-dir fi if [ "$nopostinstall" = "" ]; then echo "Running postinstall scripts .." (cd "$wadir" ; WEBMIN_CONFIG=$config_dir WEBMIN_VAR=$var_dir "$wadir/run-postinstalls.pl") echo "..done" echo "" fi # Enable background collection if [ "$upgrading" != 1 -a -r $config_dir/system-status/enable-collection.pl ]; then echo "Enabling background status collection .." $config_dir/system-status/enable-collection.pl 5 echo "..done" echo "" fi # Run package-defined post-install script if [ -r "$srcdir/setup-post.sh" ]; then . "$srcdir/setup-post.sh" fi if [ "$nostart" = "" ]; then if [ "$inetd" != "1" ]; then echo "Attempting to start Webmin mini web server.." $config_dir/start if [ $? != "0" ]; then echo "ERROR: Failed to start web server!" echo "" exit 14 fi echo "..done" echo "" fi echo "***********************************************************************" echo "Webmin has been installed and started successfully. Use your web" echo "browser to go to" echo "" host=`hostname` if [ "$ssl" = "1" ]; then echo " https://$host:$port/" else echo " http://$host:$port/" fi echo "" echo "and login with the name and password you entered previously." echo "" if [ "$ssl" = "1" ]; then echo "Because Webmin uses SSL for encryption only, the certificate" echo "it uses is not signed by one of the recognized CAs such as" echo "Verisign. When you first connect to the Webmin server, your" echo "browser will ask you if you want to accept the certificate" echo "presented, as it does not recognize the CA. Say yes." echo "" fi fi if [ "$oldwadir" != "$wadir" -a "$upgrading" = 1 -a "$deletedold" != 1 ]; then echo "The directory from the previous version of Webmin" echo " $oldwadir" echo "Can now be safely deleted to free up disk space, assuming" echo "that all third-party modules have been copied to the new" echo "version." echo "" fi |
:: Command execute :: | |
:: Shadow's tricks :D :: | |
Useful Commands
|
:: Preddy's tricks :D :: | |
Php Safe-Mode Bypass (Read Files)
|
--[ c999shell v. 1.0 pre-release build #16 Modded by Shadow & Preddy | RootShell Security Group | r57 c99 shell | Generation time: 0.0121 ]-- |