Viewing file:  openbsd-lib.pl (10.71 KB) -rwxr-xr-x
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
# openbsd-lib.pl
# Quota functions for openbsd
# quotas_init()
sub quotas_init
{
return undef;
}
# quotas_supported()
# Returns 1 for user quotas, 2 for group quotas or 3 for both
sub quotas_supported
{
return 3;
}
# free_space(filesystem)
# Returns an array containing btotal, bfree, ftotal, ffree
sub free_space
{
local(@out, @rv);
my $oldsize = $ENV{'BLOCKSIZE'};
$ENV{'BLOCKSIZE'} = 512;
my $out = &backquote_command("df -i ".quotemeta($_[0]));
$ENV{'BLOCKSIZE'} = $oldsize;
if ($out =~ /Mounted on\n\S+\s+(\d+)\s+\d+\s+(\d+)\s+\S+\s+(\d+)\s+(\d+)/) {
return ($1, $2, $3+$4, $4);
}
return ( );
}
# quota_can(&mnttab, &fstab)
# Can this filesystem type support quotas?
# 0 = No quota support (or not turned on in /etc/fstab)
# 1 = User quotas only
# 2 = Group quotas only
# 3 = User and group quotas
sub quota_can
{
return ($_[1]->[3] =~ /userquota/ ? 1 : 0) +
($_[1]->[3] =~ /groupquota/ ? 2 : 0);
}
# quota_now(&mnttab, &fstab)
# Are quotas currently active?
# 0 = Not active
# 1 = User quotas active
# 2 = Group quotas active
# 3 = Both active
sub quota_now
{
return $_[0]->[3] =~ /quota/ ? 3 : 0;
}
# quotaon(filesystem, mode)
# Activate quotas and create quota files for some filesystem. The mode can
# be 1 for user only, 2 for group only or 3 for user and group
sub quotaon
{
return if (&is_readonly_mode());
local($out, $qf, @qfile, $flags);
if ($_[1]%2 == 1) {
# turn on user quotas
$qf = "$_[0]/quota.user";
if (!(-r $qf)) {
&open_tempfile(QUOTAFILE, ">$qf", 0, 1);
&close_tempfile(QUOTAFILE);
&set_ownership_permissions(undef, undef, 0600, $qf);
&system_logged("$config{'quotacheck_command'} $_[0]");
}
$out = &backquote_logged("$config{'user_quotaon_command'} $_[0] 2>&1");
if ($?) { return $out; }
}
if ($_[1] > 1) {
# turn on group quotas
$qf = "$_[0]/quota.group";
if (!(-r $qf)) {
&open_tempfile(QUOTAFILE, ">$qf", 0, 1);
&close_tempfile(QUOTAFILE);
&set_ownership_permissions(undef, undef, 0600, $qf);
&system_logged("$config{'quotacheck_command'} $_[0]");
}
$out = &backquote_logged("$config{'group_quotaon_command'} $_[0] 2>&1");
if ($?) { return $out; }
}
return undef;
}
# quotaoff(filesystem, mode)
# Turn off quotas for some filesystem
sub quotaoff
{
return if (&is_readonly_mode());
local($out);
if ($_[1]%2 == 1) {
$out = &backquote_logged("$config{'user_quotaoff_command'} $_[0] 2>&1");
if ($?) { return $out; }
}
if ($_[1] > 1) {
$out = &backquote_logged("$config{'group_quotaoff_command'} $_[0] 2>&1");
if ($?) { return $out; }
}
return undef;
}
# user_filesystems(user)
# Fills the array %filesys with details of all filesystem some user has
# quotas on
sub user_filesystems
{
local($n, $_, %mtab);
open(QUOTA, "$config{'user_quota_command'} ".quotemeta($_[0])." |");
$n=0; while(<QUOTA>) {
chop;
if (/^(Disk|\s+Filesystem)/) { next; }
if (/^(\S+)$/) {
# Bogus wrapped line
$filesys{$n,'filesys'} = $1;
local $nl = <QUOTA>;
$nl =~ /^\s+(\S+)\s+(\S+)\s+(\S+)(.{8}\s+)(\S+)\s+(\S+)\s+(\S+)(.*)/ ||
$nl =~ /^.{15}(.{8}).(.{7})(.{8}).{8}(.{8}).(.{7})(.{8})/;
$filesys{$n,'ublocks'} = int($1);
$filesys{$n,'sblocks'} = int($2);
$filesys{$n,'hblocks'} = int($3);
$filesys{$n,'ufiles'} = int($4);
$filesys{$n,'sfiles'} = int($5);
$filesys{$n,'hfiles'} = int($6);
$n++;
}
elsif (/^\s*(\S+)\s+(\S+)\s+(\S+)\s+(\S+)(.{8}\s+)(\S+)\s+(\S+)\s+(\S+)(.*)/ ||
/^(.{15})(.{8}).(.{7})(.{8}).{8}(.{8}).(.{7})(.{8})/) {
$filesys{$n,'ublocks'} = int($2);
$filesys{$n,'sblocks'} = int($3);
$filesys{$n,'hblocks'} = int($4);
$filesys{$n,'ufiles'} = int($5);
$filesys{$n,'sfiles'} = int($6);
$filesys{$n,'hfiles'} = int($7);
$filesys{$n,'filesys'} = $1;
$filesys{$n,'filesys'} =~ s/^\s+//g;
$n++;
}
}
close(QUOTA);
return $n;
}
# group_filesystems(group)
# Fills the array %filesys with details of all filesystem some group has
# quotas on
sub group_filesystems
{
local($n, $_, %mtab);
open(QUOTA, "$config{'group_quota_command'} ".quotemeta($_[0])." |");
$n=0; while(<QUOTA>) {
chop;
if (/^(Disk|\s+Filesystem)/) { next; }
if (/^(\S+)$/) {
# Bogus wrapped line
$filesys{$n,'filesys'} = $1;
local $nl = <QUOTA>;
$nl =~ /^\s+(\S+)\s+(\S+)\s+(\S+)(.{8}\s+)(\S+)\s+(\S+)\s+(\S+)(.*)/ ||
$nl =~ /^.{15}(.{8}).(.{7})(.{8}).{8}(.{8}).(.{7})(.{8})/;
$filesys{$n,'ublocks'} = int($1);
$filesys{$n,'sblocks'} = int($2);
$filesys{$n,'hblocks'} = int($3);
$filesys{$n,'ufiles'} = int($4);
$filesys{$n,'sfiles'} = int($5);
$filesys{$n,'hfiles'} = int($6);
$n++;
}
elsif (/^\s*(\S+)\s+(\S+)\s+(\S+)\s+(\S+)(.{8}\s+)(\S+)\s+(\S+)\s+(\S+)(.*)/ ||
/^(.{15})(.{8}).(.{7})(.{8}).{8}(.{8}).(.{7})(.{8})/) {
$filesys{$n,'ublocks'} = int($2);
$filesys{$n,'sblocks'} = int($3);
$filesys{$n,'hblocks'} = int($4);
$filesys{$n,'ufiles'} = int($5);
$filesys{$n,'sfiles'} = int($6);
$filesys{$n,'hfiles'} = int($7);
$filesys{$n,'filesys'} = $1;
$filesys{$n,'filesys'} =~ s/^\s+//g;
$n++;
}
}
close(QUOTA);
return $n;
}
# filesystem_users(filesystem)
# Fills the array %user with information about all users with quotas
# on this filesystem. This may not be all users on the system..
sub filesystem_users
{
local($rep, @rep, $n, $what);
$rep = `$config{'user_repquota_command'} $_[0] 2>&1`;
if ($?) { return -1; }
@rep = split(/\n/, $rep);
@rep = grep { !/^root\s/ } @rep[3..$#rep];
for($n=0; $n<@rep; $n++) {
if ($rep[$n] =~ /(\S+)\s*[\-\+]{2}\s+(\d+)\s+(\d+)\s+(\d+)\s(.{0,15})\s(\d+)\s+(\d+)\s+(\d+)(.*)/ || $rep[$n] =~ /(\S+)\s+..(.{8})(.{8})(.{8})(.{7})(.{8})(.{8})(.{8})(.*)/) {
$user{$n,'user'} = $1;
$user{$n,'ublocks'} = int($2);
$user{$n,'sblocks'} = int($3);
$user{$n,'hblocks'} = int($4);
$user{$n,'gblocks'} = $5;
$user{$n,'ufiles'} = int($6);
$user{$n,'sfiles'} = int($7);
$user{$n,'hfiles'} = int($8);
$user{$n,'gfiles'} = $9;
$user{$n,'gblocks'} = &trunc_space($user{$n,'gblocks'});
$user{$n,'gfiles'} = &trunc_space($user{$n,'gfiles'});
}
}
return $n;
}
# filesystem_groups(filesystem)
# Fills the array %group with information about all groups with quotas
# on this filesystem. This may not be all groups on the system..
sub filesystem_groups
{
local($rep, @rep, $n, $what);
$rep = `$config{'group_repquota_command'} $_[0] 2>&1`;
if ($?) { return -1; }
@rep = split(/\n/, $rep);
@rep = @rep[3..$#rep];
for($n=0; $n<@rep; $n++) {
if ($rep[$n] =~ /(\S+)\s*[\-\+]{2}\s+(\d+)\s+(\d+)\s+(\d+)\s(.{0,15})\s(\d+)\s+(\d+)\s+(\d+)(.*)/ || $rep[$n] =~ /(\S+)\s+..(.{8})(.{8})(.{8})(.{7})(.{8})(.{8})(.{8})/) {
$group{$n,'group'} = $1;
$group{$n,'ublocks'} = int($2);
$group{$n,'sblocks'} = int($3);
$group{$n,'hblocks'} = int($4);
$group{$n,'gblocks'} = $5;
$group{$n,'ufiles'} = int($6);
$group{$n,'sfiles'} = int($7);
$group{$n,'hfiles'} = int($8);
$group{$n,'gfiles'} = $9;
$group{$n,'gblocks'} = &trunc_space($group{$n,'gblocks'});
$group{$n,'gfiles'} = &trunc_space($group{$n,'gfiles'});
}
}
return $n;
}
# edit_quota_file(data, filesys, sblocks, hblocks, sfiles, hfiles)
sub edit_quota_file
{
local($rv, $line, %mtab, @m);
@line = split(/\n/, $_[0]);
for($i=0; $i<@line; $i++) {
if ($line[$i] =~ /^(\S+): (blocks|kbytes) in use: (\d+), limits \(soft = (\d+), hard = (\d+)\)$/ && $1 eq $_[1]) {
# found lines to change, old style
$rv .= "$1: $2 in use: $3, limits (soft = $_[2], hard = $_[3])\n";
$line[++$i] =~ /^\s*inodes in use: (\d+), limits \(soft = (\d+), hard = (\d+)\)$/;
$rv .= "\tinodes in use: $1, limits (soft = $_[4], hard = $_[5])\n";
}
elsif ($line[$i] =~ /^(\S+): in use: (\d+)k, limits \(soft = (\d+)k, hard = (\d+)k\)$/ && $1 eq $_[1]) {
# found lines to change, new style
$rv .= "$1: in use: ${2}k, limits (soft = $_[2]k, hard = $_[3]k)\n";
$line[++$i] =~ /^\s*inodes in use: (\d+), limits \(soft = (\d+), hard = (\d+)\)$/;
$rv .= "\tinodes in use: $1, limits (soft = $_[4], hard = $_[5])\n";
}
else { $rv .= "$line[$i]\n"; }
}
return $rv;
}
# quotacheck(filesystem, mode)
# Runs quotacheck on some filesystem
sub quotacheck
{
$out = &backquote_logged("$config{'quotacheck_command'} $_[0] 2>&1");
if ($?) { return $out; }
return undef;
}
# copy_user_quota(user, [user]+)
# Copy the quotas for some user to many others
sub copy_user_quota
{
for($i=1; $i<@_; $i++) {
$out = &backquote_logged("$config{'user_copy_command'} ".
quotemeta($_[0])." ".quotemeta($_[$i])." 2>&1");
if ($?) { return $out; }
}
return undef;
}
# copy_group_quota(group, [group]+)
# Copy the quotas for some group to many others
sub copy_group_quota
{
for($i=1; $i<@_; $i++) {
$out = &backquote_logged("$config{'group_copy_command'} ".
quotemeta($_[0])." ".quotemeta($_[$i])." 2>&1");
if ($?) { return $out; }
}
return undef;
}
# default_grace()
# Returns 0 if grace time can be 0, 1 if zero grace means default
sub default_grace
{
return 0;
}
# get_user_grace(filesystem)
# Returns an array containing btime, bunits, ftime, funits
# The units can be 0=sec, 1=min, 2=hour, 3=day
sub get_user_grace
{
local(@rv, %mtab, @m);
$ENV{'EDITOR'} = $ENV{'VISUAL'} = "cat";
open(GRACE, "$config{'user_grace_command'} $_[0] |");
while(<GRACE>) {
if (/^(\S+): block grace period: (\d+) (\S+), file grace period: (\d+) (\S+)/ && $1 eq $_[0]) {
@rv = ($2, $name_to_unit{$3}, $4, $name_to_unit{$5});
}
}
close(GRACE);
return @rv;
}
# get_group_grace(filesystem)
# Returns an array containing btime, bunits, ftime, funits
# The units can be 0=sec, 1=min, 2=hour, 3=day
sub get_group_grace
{
local(@rv, %mtab, @m);
$ENV{'EDITOR'} = $ENV{'VISUAL'} = "cat";
open(GRACE, "$config{'group_grace_command'} $_[0] |");
while(<GRACE>) {
if (/^(\S+): block grace period: (\d+) (\S+), file grace period: (\d+) (\S+)/ && $1 eq $_[0]) {
@rv = ($2, $name_to_unit{$3}, $4, $name_to_unit{$5});
}
}
close(GRACE);
return @rv;
}
# edit_grace_file(data, filesystem, btime, bunits, ftime, funits)
sub edit_grace_file
{
local($rv, $line, @m, %mtab);
foreach $line (split(/\n/, $_[0])) {
if ($line =~ /^(\S+): block grace period: (\d+) (\S+), file grace period: (\d+) (\S+)/ && $1 eq $_[1]) {
# replace this line
$line = "$1: block grace period: $_[2] $unit_to_name{$_[3]}, file grace period: $_[4] $unit_to_name{$_[5]}";
}
$rv .= "$line\n";
}
return $rv;
}
# grace_units()
# Returns an array of possible units for grace periods
sub grace_units
{
return ($text{'grace_seconds'}, $text{'grace_minutes'}, $text{'grace_hours'},
$text{'grace_days'});
}
# fs_block_size(dir, device, filesystem)
# Returns the size of blocks on some filesystem, or undef if unknown.
# Always 512 because the ENV setting above forces this.
sub fs_block_size
{
return 512;
}
# quota_block_size(dir, device, filesystem)
# Always returns 1024, as that's the block size BSD appears to use
sub quota_block_size
{
return 1024;
}
%name_to_unit = ( "second", 0, "seconds", 0,
"minute", 1, "minutes", 1,
"hour", 2, "hours", 2,
"day", 3, "days", 3,
);
foreach $k (keys %name_to_unit) {
$unit_to_name{$name_to_unit{$k}} = $k;
}
1;
|