Viewing file:  cvsweb.cgi (83.55 KB) -rwxr-xr-x
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
#!/usr/bin/perl
#
# cvsweb - a CGI interface to CVS trees.
#
# Written in their spare time by
# Bill Fenner <fenner@FreeBSD.org> (original work)
# extended by Henner Zeller <zeller@think.de>,
# Henrik Nordström <hno@hem.passagen.se>
# Ken Coar <coar@Apache.Org>
# Dick Balaska <dick@buckosoft.com>
# Jens-Uwe Mager <jum@helios.de>
#
# Based on:
# * Bill Fenners cvsweb.cgi revision 1.28 available from:
# http://www.FreeBSD.org/cgi/cvsweb.cgi/www/en/cgi/cvsweb.cgi
#
# Copyright (c) 1996-1998 Bill Fenner
# (c) 1998-1999 Henner Zeller
# (c) 1999 Henrik Nordström
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
#
# $Id: cvsweb.cgi,v 1.112 2001/07/24 13:03:16 hzeller Exp $
#
###
require './pserver-lib.pl';
$access{'cvsweb'} || &error($text{'cvsweb_ecannot'});
use vars qw (
$config $allow_version_select $verbose
%CVSROOT %CVSROOTdescr %MIRRORS %DEFAULTVALUE %ICONS %MTYPES
%alltags @tabcolors %fileinfo %tags @branchnames %nameprinted
%symrev %revsym @allrevisions %date %author @revdisplayorder
@revisions %state %difflines %log %branchpoint @revorder
$checkoutMagic $doCheckout $scriptname $scriptwhere
$where $Browser $nofilelinks $maycompress @stickyvars
%input $query $barequery $sortby $bydate $byrev $byauthor
$bylog $byfile $hr_default $logsort $cvstree $cvsroot
$mimetype $defaultTextPlain $defaultViewable $allow_compress
$GZIPBIN $backicon $diricon $fileicon $fullname $newname
$cvstreedefault $body_tag $logo $defaulttitle $address
$backcolor $long_intro $short_instruction $shortLogLen
$show_author $dirtable $tablepadding $columnHeaderColorDefault
$columnHeaderColorSorted $hr_breakable $hr_funout $hr_ignwhite
$hr_ignkeysubst $diffcolorHeading $diffcolorEmpty $diffcolorRemove
$diffcolorChange $diffcolorAdd $diffcolorDarkChange $difffontface
$difffontsize $inputTextSize $mime_types $allow_annotate
$allow_markup $use_java_script $open_extern_window
$extern_window_width $extern_window_height $edit_option_form
$checkout_magic $show_subdir_lastmod $show_log_in_markup $v
$navigationHeaderColor $tableBorderColor $markupLogColor
$tabstop $state $annTable $sel $curbranch @HideModules @DissallowRead
$module $use_descriptions %descriptions @mytz $dwhere $moddate
$use_moddate $has_zlib $gzip_open
);
##### prototype declarations ########
sub printDiffSelect($);
sub findLastModifiedSubdirs(@);
sub htmlify($);
sub spacedHtmlText($);
sub link($$);
sub revcmp($$);
sub fatal($$);
sub credirect($);
sub safeglob($);
sub getMimeTypeFromSuffix($);
sub doAnnotate ($$);
sub doCheckout($$);
sub cvswebMarkup($$$);
sub viewable($);
sub doDiff($$$$$$);
sub getDirLogs($$@);
sub readLog($;$);
sub printLog($;$);
sub doLog($);
sub flush_diff_rows ($$$$);
sub human_readable_diff($);
sub navigateHeader ($$$$$);
sub plural_write ($$);
sub readableTime ($$);
sub clickablePath($$);
sub chooseCVSRoot();
sub chooseMirror();
sub fileSortCmp();
sub download_url($$$);
sub download_link($$$$);
sub toggleQuery($$);
sub urlencode($);
sub http_header(;$);
sub html_header($);
sub html_footer();
sub link_tags($);
sub forbidden_module($);
sub forbidden_file($);
sub checkForbidden($@);
sub gzipclose();
sub MAGIC1();
sub MAGIC2();
sub OSCODE();
##### Start of Configuration Area ########
# == EDIT this ==
# User configuration is stored in
$config = "./cvsweb.conf";
# == Configuration defaults ==
# Defaults for configuration variables that shouldn't need
# to be configured..
$allow_version_select = 1;
##### End of Configuration Area ########
######## Configuration variables #########
# These are defined to allow checking with perl -cw
%CVSROOT = %MIRRORS = %DEFAULTVALUE = %ICONS = %MTYPES =
%tags = %alltags = @tabcolors = %fileinfo = ();
$cvstreedefault = $body_tag = $logo = $defaulttitle = $address =
$backcolor = $long_intro = $short_instruction = $shortLogLen =
$show_author = $dirtable = $tablepadding = $columnHeaderColorDefault =
$columnHeaderColorSorted = $hr_breakable = $hr_funout = $hr_ignwhite =
$hr_ignkeysubst = $diffcolorHeading = $diffcolorEmpty = $diffcolorRemove =
$diffcolorChange = $diffcolorAdd = $diffcolorDarkChange = $difffontface =
$difffontsize = $inputTextSize = $mime_types = $allow_annotate =
$allow_markup = $use_java_script = $open_extern_window =
$extern_window_width = $extern_window_height = $edit_option_form =
$checkout_magic = $show_subdir_lastmod = $show_log_in_markup = $v =
$navigationHeaderColor = $tableBorderColor = $markupLogColor =
$tabstop = $use_moddate = $moddate = $gzip_open = undef;
##### End of configuration variables #####
use Time::Local;
use IPC::Open2;
# Check if the zlib C library interface is installed, and if yes
# we can avoid using the extra gzip process.
eval {
require Compress::Zlib;
};
$has_zlib = !$@;
$verbose = $v;
$checkoutMagic = "~checkout~";
$where = defined($ENV{'PATH_INFO'}) ? $ENV{'PATH_INFO'} : "";
$doCheckout = ($where =~ /^\/$checkoutMagic/);
$where =~ s|^/($checkoutMagic)?||;
$where =~ s|/+$||;
$where =~ s|^/+||;
($scriptname = $ENV{'SCRIPT_NAME'}) =~ s|^/?|/|;
$scriptname =~ s|/+$||;
if ($where) {
$scriptwhere = $scriptname . '/' . urlencode($where);
}
else {
$scriptwhere = $scriptname;
}
$scriptwhere =~ s|/+$||;
# in lynx, it it very annoying to have two links
# per file, so disable the link at the icon
# in this case:
$Browser = $ENV{'HTTP_USER_AGENT'};
$nofilelinks = ($Browser =~ m'^Lynx/');
# newer browsers accept gzip content encoding
# and state this in a header
# (netscape did always but didn't state it)
# It has been reported that these
# braindamaged MS-Internet Exploders claim that they
# accept gzip .. but don't in fact and
# display garbage then :-/
# Turn off gzip if running under mod_perl and no zlib is available,
# piping does not work as expected inside the server.
$maycompress = (((defined($ENV{'HTTP_ACCEPT_ENCODING'})
&& $ENV{'HTTP_ACCEPT_ENCODING'} =~ m|gzip|)
|| $Browser =~ m%^Mozilla/3%)
&& ($Browser !~ m/MSIE/)
&& !(defined($ENV{'MOD_PERL'}) && !$has_zlib));
$maycompress = 0;
# put here the variables we need in order
# to hold our state - they will be added (with
# their current value) to any link/query string
# you construct
@stickyvars = qw(cvsroot hideattic sortby logsort f only_with_tag);
if (-f $config) {
do "$config";
}
else {
&fatal("500 Internal Error",
'Configuration not found. Set the variable <code>$config</code> '
. 'in cvsweb.cgi, or the environment variable '
. '<code>CVSWEB_CONFIG</code>, to your <b>cvsweb.conf</b> '
. 'configuration file first.');
}
undef %input;
if ($query = $ENV{'QUERY_STRING'}) {
foreach (split(/&/, $query)) {
y/+/ /;
s/%(..)/sprintf("%c", hex($1))/ge; # unquote %-quoted
if (/(\S+)=(.*)/) {
$input{$1} = $2 if ($2 ne "");
}
else {
$input{$_}++;
}
}
}
# For backwards compability, set only_with_tag to only_on_branch if set.
$input{only_with_tag} = $input{only_on_branch}
if (defined($input{only_on_branch}));
foreach (keys %DEFAULTVALUE)
{
# replace not given parameters with the default parameters
if (!defined($input{$_}) || $input{$_} eq "") {
# Empty Checkboxes in forms return -- nothing. So we define a helper
# variable in these forms (copt) which indicates that we just set
# parameters with a checkbox
if (!defined($input{"copt"})) {
# 'copt' isn't defined --> empty input is not the result
# of empty input checkbox --> set default
$input{$_} = $DEFAULTVALUE{$_} if (defined($DEFAULTVALUE{$_}));
}
else {
# 'copt' is defined -> the result of empty input checkbox
# -> set to zero (disable) if default is a boolean (0|1).
$input{$_} = 0
if (defined($DEFAULTVALUE{$_})
&& ($DEFAULTVALUE{$_} eq "0" || $DEFAULTVALUE{$_} eq "1"));
}
}
}
$barequery = "";
foreach (@stickyvars) {
# construct a query string with the sticky non default parameters set
if (defined($input{$_}) && ($input{$_} ne "") &&
(!defined($DEFAULTVALUE{$_}) || $input{$_} ne $DEFAULTVALUE{$_})) {
if ($barequery) {
$barequery = $barequery . "&";
}
my $thisval = urlencode($_) . "=" . urlencode($input{$_});
$barequery .= $thisval;
}
}
# is there any query ?
if ($barequery) {
$query = "?$barequery";
$barequery = "&" . $barequery;
}
else {
$query = "";
}
# get actual parameters
$sortby = $input{"sortby"};
$bydate = 0;
$byrev = 0;
$byauthor = 0;
$bylog = 0;
$byfile = 0;
if ($sortby eq "date") {
$bydate = 1;
}
elsif ($sortby eq "rev") {
$byrev = 1;
}
elsif ($sortby eq "author") {
$byauthor = 1;
}
elsif ($sortby eq "log") {
$bylog = 1;
}
else {
$byfile = 1;
}
$hr_default = $input{'f'} eq 'h';
$logsort = $input{"logsort"};
## Default CVS-Tree
if (!defined($CVSROOT{$cvstreedefault})) {
&fatal("500 Internal Error",
"<code>\$cvstreedefault</code> points to a repository ($cvstreedefault)"
. "not defined in <code>%CVSROOT</code> "
. "(edit your configuration file $config)");
}
$cvstree = $cvstreedefault;
$cvsroot = $CVSROOT{"$cvstree"};
# alternate CVS-Tree, configured in cvsweb.conf
if ($input{'cvsroot'}) {
if ($CVSROOT{$input{'cvsroot'}}) {
$cvstree = $input{'cvsroot'};
$cvsroot = $CVSROOT{"$cvstree"};
}
}
# create icons out of description
foreach my $k (keys %ICONS) {
no strict 'refs';
my ($itxt,$ipath,$iwidth,$iheight) = @{$ICONS{$k}};
if ($ipath) {
$ {"${k}icon"} = "<IMG SRC=\"$ipath\" ALT=\"$itxt\" BORDER=\"0\" WIDTH=\"$iwidth\" HEIGHT=\"$iheight\">";
}
else {
$ {"${k}icon"} = $itxt;
}
}
# Do some special configuration for cvstrees
do "$config-$cvstree" if (-f "$config-$cvstree");
$fullname = $cvsroot . '/' . $where;
$mimetype = &getMimeTypeFromSuffix ($fullname);
$defaultTextPlain = ($mimetype eq "text/plain");
$defaultViewable = $allow_markup && viewable($mimetype);
# search for GZIP if compression allowed
# We've to find out if the GZIP-binary exists .. otherwise
# ge get an Internal Server Error if we try to pipe the
# output through the nonexistent gzip ..
# any more elegant ways to prevent this are welcome!
if ($allow_compress && $maycompress && !$has_zlib) {
foreach (split(/:/, $ENV{PATH})) {
if (-x "$_/gzip") {
$GZIPBIN = "$_/gzip";
last;
}
}
}
if (-d $fullname) {
#
# ensure, that directories always end with (exactly) one '/'
# to allow relative URL's. If they're not, make a credirect.
##
my $pathinfo = defined($ENV{'PATH_INFO'}) ? $ENV{'PATH_INFO'} : "";
if (!($pathinfo =~ m|/$|) || ($pathinfo =~ m |/{2,}$|)) {
credirect ($scriptwhere . '/' . $query);
}
else {
$where .= '/';
$scriptwhere .= '/';
}
}
if (!-d $cvsroot) {
&fatal("500 Internal Error",'$CVSROOT not found!<P>The server on which the CVS tree lives is probably down. Please try again in a few minutes.');
}
#
# See if the module is in our forbidden list.
#
$where =~ m:([^/]*):;
$module = $1;
if ($module && &forbidden_module($module)) {
&fatal("403 Forbidden", "Access to $where forbidden.");
}
##############################
# View a directory
###############################
elsif (-d $fullname) {
my $dh = do {local(*DH);};
opendir($dh, $fullname) || &fatal("404 Not Found","$where: $!");
my @dir = readdir($dh);
closedir($dh);
my @subLevelFiles = findLastModifiedSubdirs(@dir)
if ($show_subdir_lastmod);
getDirLogs($cvsroot,$where,@subLevelFiles);
if ($where eq '/') {
html_header("$defaulttitle");
print $long_intro;
}
else {
html_header("$where");
print $short_instruction;
}
my $descriptions;
if (($use_descriptions) && open (DESC, "<$cvsroot/CVSROOT/descriptions")) {
while (<DESC>) {
chomp;
my ($dir,$description) = /(\S+)\s+(.*)/;
$descriptions{$dir} = $description;
}
}
print "<P><a name=\"dirlist\"></a>\n";
# give direct access to dirs
if ($where eq '/') {
chooseMirror();
chooseCVSRoot();
}
else {
print "<p>Current directory: <b>", &clickablePath($where,0), "</b>\n";
print "<P>Current tag: <B>", $input{only_with_tag}, "</b>\n" if
$input{only_with_tag};
}
print "<HR NOSHADE>\n";
# Using <MENU> in this manner violates the HTML2.0 spec but
# provides the results that I want in most browsers. Another
# case of layout spooging up HTML.
my $infocols = 0;
if ($dirtable) {
if (defined($tableBorderColor)) {
# Can't this be done by defining the border for the inner table?
print "<table border=0 cellpadding=0 width=\"100%\"><tr><td bgcolor=\"$tableBorderColor\">";
}
print "<table width=\"100%\" border=0 cellspacing=1 cellpadding=$tablepadding>\n";
$infocols++;
print "<tr><th align=left bgcolor=\"" . (($byfile) ?
$columnHeaderColorSorted :
$columnHeaderColorDefault) . "\">";
print "<a href=\"./" . &toggleQuery("sortby","file") .
"#dirlist\">" if (!$byfile);
print "File";
print "</a>" if (!$byfile);
print "</th>";
# do not display the other column-headers, if we do not have any files
# with revision information:
if (scalar(%fileinfo)) {
$infocols++;
print "<th align=left bgcolor=\"" . (($byrev) ?
$columnHeaderColorSorted :
$columnHeaderColorDefault) . "\">";
print "<a href=\"./" . &toggleQuery ("sortby","rev") .
"#dirlist\">" if (!$byrev);
print "Rev.";
print "</a>" if (!$byrev);
print "</th>";
$infocols++;
print "<th align=left bgcolor=\"" . (($bydate) ?
$columnHeaderColorSorted :
$columnHeaderColorDefault) . "\">";
print "<a href=\"./" . &toggleQuery ("sortby","date") .
"#dirlist\">" if (!$bydate);
print "Age";
print "</a>" if (!$bydate);
print "</th>";
if ($show_author) {
$infocols++;
print "<th align=left bgcolor=\"" . (($byauthor) ?
$columnHeaderColorSorted :
$columnHeaderColorDefault) . "\">";
print "<a href=\"./" . &toggleQuery ("sortby","author") .
"#dirlist\">" if (!$byauthor);
print "Author";
print "</a>" if (!$byauthor);
print "</th>";
}
$infocols++;
print "<th align=left bgcolor=\"" . (($bylog) ?
$columnHeaderColorSorted :
$columnHeaderColorDefault) . "\">";
print "<a href=\"./", toggleQuery("sortby","log"), "#dirlist\">" if (!$bylog);
print "Last log entry";
print "</a>" if (!$bylog);
print "</th>";
}
elsif ($use_descriptions) {
print "<th align=left bgcolor=\"". $columnHeaderColorDefault . "\">";
print "Description";
$infocols++;
}
print "</tr>\n";
}
else {
print "<menu>\n";
}
my $dirrow = 0;
my $i;
lookingforattic:
for ($i = 0; $i <= $#dir; $i++) {
if ($dir[$i] eq "Attic") {
last lookingforattic;
}
}
if (!$input{'hideattic'} && ($i <= $#dir) &&
opendir($dh, $fullname . "/Attic")) {
splice(@dir, $i, 1,
grep((s|^|Attic/|,!m|/\.|), readdir($dh)));
closedir($dh);
}
my $hideAtticToggleLink = "<a href=\"./" .
&toggleQuery ("hideattic") .
"#dirlist\">[Hide]</a>" if (!$input{'hideattic'});
# Sort without the Attic/ pathname.
# place directories first
my $attic;
my $url;
my $fileurl;
my $filesexists;
my $filesfound;
foreach (sort { &fileSortCmp } @dir) {
if ($_ eq '.') {
next;
}
# ignore CVS lock and stale NFS files
next if (/^#cvs\.|^,|^\.nfs/);
# Check whether to show the CVSROOT path
next if ($input{'hidecvsroot'} && ($_ eq 'CVSROOT'));
# Check whether the module is in the restricted list
next if ($_ && &forbidden_module($_));
# Ignore non-readable files
next if ($input{'hidenonreadable'} && !(-r "$fullname/$_"));
if (s|^Attic/||) {
$attic = " (in the Attic) " . $hideAtticToggleLink;
}
else {
$attic = "";
}
if ($_ eq '..' || -d "$fullname/$_") {
next if ($_ eq '..' && $where eq '/');
my ($rev,$date,$log,$author,$filename);
($rev,$date,$log,$author,$filename) = @{$fileinfo{$_}}
if (defined($fileinfo{$_}));
print "<tr bgcolor=\"" . @tabcolors[$dirrow%2] . "\"><td>" if ($dirtable);
if ($_ eq '..') {
$url = "../" . $query;
if ($nofilelinks) {
print $backicon;
}
else {
print &link($backicon,$url);
}
print " ", &link("Previous Directory",$url);
}
else {
$url = urlencode($_) . '/' . $query;
print "<A NAME=\"$_\"></A>";
if ($nofilelinks) {
print $diricon;
}
else {
print &link($diricon,$url);
}
print " ", &link($_ . "/", $url), $attic;
if ($_ eq "Attic") {
print " <a href=\"./" .
&toggleQuery ("hideattic") .
"#dirlist\">[Don't hide]</a>";
}
}
# Show last change in dir
if ($filename) {
print "</td><td> </td><td> " if ($dirtable);
if ($date) {
print " <i>" . readableTime(time() - $date,0) . "</i>";
}
if ($show_author) {
print "</td><td> " if ($dirtable);
print $author;
}
print "</td><td> " if ($dirtable);
$filename =~ s%^[^/]+/%%;
print "$filename/$rev";
print "<BR>" if ($dirtable);
if ($log) {
print " <font size=-1>"
. &htmlify(substr($log,0,$shortLogLen));
if (length $log > 80) {
print "...";
}
print "</font>";
}
}
else {
my ($dwhere) = ($where ne "/" ? $where : "") . $_;
if ($use_descriptions && defined $descriptions{$dwhere}) {
print "<TD COLSPAN=" . ($infocols-1) . "> " if $dirtable;
print $descriptions{$dwhere};
} elsif ($dirtable && $infocols > 1) {
# close the row with the appropriate number of
# columns, so that the vertical seperators are visible
my($cols) = $infocols;
while ($cols > 1) {
print "</td><td> ";
$cols--;
}
}
}
if ($dirtable) {
print "</td></tr>\n";
}
else {
print "<br>\n";
}
$dirrow++;
}
elsif (s/,v$//) {
$fileurl = ($attic ? "Attic/" : "") . urlencode($_);
$url = $fileurl . $query;
my $rev = '';
my $date = '';
my $log = '';
my $author = '';
$filesexists++;
next if (!defined($fileinfo{$_}));
($rev,$date,$log,$author) = @{$fileinfo{$_}};
$filesfound++;
print "<tr bgcolor=\"" . @tabcolors[$dirrow%2] . "\"><td>" if ($dirtable);
print "<A NAME=\"$_\"></A>";
if ($nofilelinks) {
print $fileicon;
}
else {
print &link($fileicon,$url);
}
print " ", &link($_, $url), $attic;
print "</td><td> " if ($dirtable);
download_link($fileurl,
$rev, $rev,
$defaultViewable ? "text/x-cvsweb-markup" : undef);
print "</td><td> " if ($dirtable);
if ($date) {
print " <i>" . readableTime(time() - $date,0) . "</i>";
}
if ($show_author) {
print "</td><td> " if ($dirtable);
print $author;
}
print "</td><td> " if ($dirtable);
if ($log) {
print " <font size=-1>" . &htmlify(substr($log,0,$shortLogLen));
if (length $log > 80) {
print "...";
}
print "</font>";
}
print "</td>" if ($dirtable);
print (($dirtable) ? "</tr>" : "<br>");
$dirrow++;
}
print "\n";
}
if ($dirtable && defined($tableBorderColor)) {
print "</td></tr></table>";
}
print "". ($dirtable == 1) ? "</table>" : "</menu>" . "\n";
if ($filesexists && !$filesfound) {
print "<P><B>NOTE:</B> There are $filesexists files, but none matches the current tag ($input{only_with_tag})\n";
}
if ($input{only_with_tag} && (!%tags || !$tags{$input{only_with_tag}})) {
%tags = %alltags
}
if (scalar %tags
|| $input{only_with_tag}
|| $edit_option_form
|| defined($input{"options"})) {
print "<hr size=1 NOSHADE>";
}
if (scalar %tags || $input{only_with_tag}) {
print "<FORM METHOD=\"GET\" ACTION=\"./\">\n";
foreach my $var (@stickyvars) {
print "<INPUT TYPE=HIDDEN NAME=\"$var\" VALUE=\"$input{$var}\">\n"
if (defined($input{$var})
&& (!defined($DEFAULTVALUE{$var})
|| $input{$var} ne $DEFAULTVALUE{$var})
&& $input{$var} ne ""
&& $var ne "only_with_tag");
}
print "Show only files with tag:\n";
print "<SELECT NAME=only_with_tag";
print " onchange=\"submit()\"" if ($use_java_script);
print ">";
print "<OPTION VALUE=\"\">All tags / default branch\n";
foreach my $tag (reverse sort { lc $a cmp lc $b } keys %tags) {
print "<OPTION",defined($input{only_with_tag}) &&
$input{only_with_tag} eq $tag ? " SELECTED":"",
">$tag\n";
}
print "</SELECT>\n";
print "<INPUT TYPE=SUBMIT VALUE=\"Go\">\n";
print "</FORM>\n";
}
my $formwhere = $scriptwhere;
$formwhere =~ s|Attic/?$|| if ($input{'hideattic'});
if ($edit_option_form || defined($input{"options"})) {
print "<FORM METHOD=\"GET\" ACTION=\"${formwhere}\">\n";
print "<INPUT TYPE=HIDDEN NAME=\"copt\" VALUE=\"1\">\n";
if ($cvstree ne $cvstreedefault) {
print "<INPUT TYPE=HIDDEN NAME=\"cvsroot\" VALUE=\"$cvstree\">\n";
}
print "<center><table cellpadding=0 cellspacing=0>";
print "<tr bgcolor=\"$columnHeaderColorDefault\"><th colspan=2>Preferences</th></tr>";
print "<tr><td>Sort files by <SELECT name=\"sortby\">";
print "<OPTION VALUE=\"\">File";
print "<OPTION",$bydate ? " SELECTED" : ""," VALUE=date>Age";
print "<OPTION",$byauthor ? " SELECTED" : ""," VALUE=author>Author"
if ($show_author);
print "<OPTION",$byrev ? " SELECTED" : ""," VALUE=rev>Revision";
print "<OPTION",$bylog ? " SELECTED" : ""," VALUE=log>Log message";
print "</SELECT></td>";
print "<td>revisions by: \n";
print "<SELECT NAME=logsort>\n";
print "<OPTION VALUE=cvs",$logsort eq "cvs" ? " SELECTED" : "", ">Not sorted";
print "<OPTION VALUE=date",$logsort eq "date" ? " SELECTED" : "", ">Commit date";
print "<OPTION VALUE=rev",$logsort eq "rev" ? " SELECTED" : "", ">Revision";
print "</SELECT></td></tr>";
print "<tr><td>Diff format: ";
printDiffSelect(0);
print "</td>";
print "<td>Show Attic files: ";
print "<INPUT NAME=hideattic TYPE=CHECKBOX", $input{'hideattic'}?" CHECKED":"",
"></td></tr>\n";
print "<tr><td align=center colspan=2><input type=submit value=\"Change Options\">";
print "</td></tr></table></center></FORM>\n";
}
print &html_footer;
print "</BODY></HTML>\n";
}
###############################
# View Files
###############################
elsif (-f $fullname . ',v') {
if (defined($input{'rev'}) || $doCheckout) {
&doCheckout($fullname, $input{'rev'});
gzipclose();
exit;
}
if (defined($input{'annotate'}) && $allow_annotate) {
&doAnnotate($input{'annotate'});
gzipclose();
exit;
}
if (defined($input{'r1'}) && defined($input{'r2'})) {
&doDiff($fullname, $input{'r1'}, $input{'tr1'},
$input{'r2'}, $input{'tr2'}, $input{'f'});
gzipclose();
exit;
}
print("going to dolog($fullname)\n") if ($verbose);
&doLog($fullname);
##############################
# View Diff
##############################
}
elsif ($fullname =~ s/\.diff$// && -f $fullname . ",v" &&
$input{'r1'} && $input{'r2'}) {
# $where-diff-removal if 'cvs rdiff' is used
# .. but 'cvs rdiff'doesn't support some options
# rcsdiff does (-w and -p), so it is disabled
# $where =~ s/\.diff$//;
# Allow diffs using the ".diff" extension
# so that browsers that default to the URL
# for a save filename don't save diff's as
# e.g. foo.c
&doDiff($fullname, $input{'r1'}, $input{'tr1'},
$input{'r2'}, $input{'tr2'}, $input{'f'});
gzipclose();
exit;
}
elsif (($newname = $fullname) =~ s|/([^/]+)$|/Attic/$1| &&
-f $newname . ",v") {
# The file has been removed and is in the Attic.
# Send a credirect pointing to the file in the Attic.
(my $newplace = $scriptwhere) =~ s|/([^/]+)$|/Attic/$1|;
&credirect($newplace . "?" . $ENV{QUERY_STRING});
exit;
}
elsif (0 && (my @files = &safeglob($fullname . ",v"))) {
http_header("text/plain");
print "You matched the following files:\n";
print join("\n", @files);
# Find the tags from each file
# Display a form offering diffs between said tags
}
else {
my $fh = do {local(*FH);};
my ($xtra, $module);
# Assume it's a module name with a potential path following it.
$xtra = $& if (($module = $where) =~ s|/.*||);
# Is there an indexed version of modules?
if (open($fh, "$cvsroot/CVSROOT/modules")) {
while (<$fh>) {
if (/^(\S+)\s+(\S+)/o && $module eq $1
&& -d "${cvsroot}/$2" && $module ne $2) {
&credirect($scriptname . '/' . $2 . $xtra);
}
}
}
&fatal("404 Not Found","$where: no such file or directory");
}
gzipclose();
## End MAIN
sub printDiffSelect($) {
my ($use_java_script) = @_;
$use_java_script = 0 if (!defined($use_java_script));
my ($f) = $input{'f'};
print "<SELECT NAME=\"f\"";
print " onchange=\"submit()\"" if ($use_java_script);
print ">\n";
print "<OPTION VALUE=h",$f eq "h" ? " SELECTED" : "", ">Colored Diff";
print "<OPTION VALUE=H",$f eq "H" ? " SELECTED" : "", ">Long Colored Diff";
print "<OPTION VALUE=u",$f eq "u" ? " SELECTED" : "", ">Unidiff";
print "<OPTION VALUE=c",$f eq "c" ? " SELECTED" : "", ">Context Diff";
#print "<OPTION VALUE=s",$f eq "s" ? " SELECTED" : "", ">Side by Side";
print "</SELECT>";
}
sub findLastModifiedSubdirs(@) {
my (@dirs) = @_;
my ($dirname, @files);
foreach $dirname (@dirs) {
next if ($dirname eq ".");
next if ($dirname eq "..");
my ($dir) = "$fullname/$dirname";
next if (!-d $dir);
my ($lastmod) = undef;
my ($lastmodtime) = undef;
my $dh = do {local(*DH);};
opendir($dh,$dir) || next;
my (@filenames) = readdir($dh);
closedir($dh);
foreach my $filename (@filenames) {
$filename = "$dirname/$filename";
my ($file) = "$fullname/$filename";
next if ($filename !~ /,v$/ || !-f $file);
$filename =~ s/,v$//;
my $modtime = -M $file;
if (!defined($lastmod) || $modtime < $lastmodtime) {
$lastmod = $filename;
$lastmodtime = $modtime;
}
}
push(@files, $lastmod) if (defined($lastmod));
}
return @files;
}
sub htmlify($) {
my($string) = @_;
# Special Characters; RFC 1866
$string =~ s/&/&/g;
$string =~ s/\"/"/g;
$string =~ s/</</g;
$string =~ s/>/>/g;
# get URL's as link ..
$string =~ s§(http|ftp|https)(://[-a-zA-Z0-9%.~:_/]+)([?&]([-a-zA-Z0-9%.~:_]+)=([-a-zA-Z0-9%.~:_])+)*§<A HREF="$1$2$3">$1$2$3</A>§;
# get e-mails as link
$string =~ s§([-a-zA-Z0-9_.]+@([-a-zA-Z0-9]+\.)+[A-Za-z]{2,4})§<A HREF="mailto:$1">$1</A>§;
return $string;
}
sub spacedHtmlText($) {
my($string) = @_;
# Cut trailing spaces
s/\s+$//;
# Expand tabs
$string =~ s/\t+/' ' x (length($&) * $tabstop - length($`) % $tabstop)/e
if (defined($tabstop));
# replace <tab> and <space> (§ is to protect us from htmlify)
# gzip can make excellent use of this repeating pattern :-)
$string =~ s/§/§%/g; #protect our & substitute
if ($hr_breakable) {
# make every other space 'breakable'
$string =~ s/ / §nbsp; §nbsp; §nbsp; §nbsp;/g; # <tab>
$string =~ s/ / §nbsp;/g; # 2 * <space>
# leave single space as it is
}
else {
$string =~ s/ /§nbsp;§nbsp;§nbsp;§nbsp;§nbsp;§nbsp;§nbsp;§nbsp;/g;
$string =~ s/ /§nbsp;/g;
}
$string = htmlify($string);
# unescape
$string =~ s/§([^%])/&$1/g;
$string =~ s/§%/§/g;
return $string;
}
sub link($$) {
my($name, $where) = @_;
return "<A HREF=\"$where\">$name</A>\n";
}
sub revcmp($$) {
my($rev1, $rev2) = @_;
my(@r1) = split(/\./, $rev1);
my(@r2) = split(/\./, $rev2);
my($a,$b);
while (($a = shift(@r1)) && ($b = shift(@r2))) {
if ($a != $b) {
return $a <=> $b;
}
}
if (@r1) { return 1; }
if (@r2) { return -1; }
return 0;
}
sub fatal($$) {
my($errcode, $errmsg) = @_;
if (defined($ENV{'MOD_PERL'})) {
Apache->request->status((split(/ /, $errcode))[0]);
}
else {
print "Status: $errcode\n";
}
html_header("Error");
print "Error: $errmsg\n";
print &html_footer;
exit(1);
}
sub credirect($) {
my($url) = @_;
if (defined($ENV{'MOD_PERL'})) {
Apache->request->status(301);
Apache->request->header_out(Location => $url);
}
else {
print "Status: 301 Moved\r\n";
print "Location: $url\r\n";
}
html_header("Moved");
print "This document is located <A HREF=$url>here</A>.\n";
print &html_footer;
exit(1);
}
sub safeglob($) {
my ($filename) = @_;
my ($dirname);
my (@results);
my $dh = do {local(*DH);};
($dirname = $filename) =~ s|/[^/]+$||;
$filename =~ s|.*/||;
if (opendir($dh, $dirname)) {
my $glob = $filename;
my $t;
# transform filename from glob to regex. Deal with:
# [, {, ?, * as glob chars
# make sure to escape all other regex chars
$glob =~ s/([\.\(\)\|\+])/\\$1/g;
$glob =~ s/\*/.*/g;
$glob =~ s/\?/./g;
$glob =~ s/{([^}]+)}/($t = $1) =~ s-,-|-g; "($t)"/eg;
foreach (readdir($dh)) {
if (/^${glob}$/) {
push(@results, $dirname . "/" .$_);
}
}
closedir($dh);
}
@results;
}
sub getMimeTypeFromSuffix($) {
my ($fullname) = @_;
my ($mimetype, $suffix);
my $fh = do {local(*FH);};
($suffix = $fullname) =~ s/^.*\.([^.]*)$/$1/;
$mimetype = $MTYPES{$suffix};
$mimetype = $MTYPES{'*'} if (!$mimetype);
if (!$mimetype && -f $mime_types) {
# okey, this is something special - search the
# mime.types database
open ($fh, "<$mime_types");
while (<$fh>) {
if ($_ =~ /^\s*(\S+\/\S+).*\b$suffix\b/) {
$mimetype = $1;
last;
}
}
close ($fh);
}
# okey, didn't find anything useful ..
if (!($mimetype =~ /\S\/\S/)) {
$mimetype = "text/plain";
}
return $mimetype;
}
###############################
# show Annotation
###############################
sub doAnnotate ($$) {
my ($rev) = @_;
my ($pid);
my ($pathname, $filename);
my $reader = do {local(*FH);};
my $writer = do {local(*FH);};
# make sure the revisions are wellformed, for security
# reasons ..
if (!($rev =~ /^[\d\.]+$/)) {
&fatal("404 Not Found",
"Malformed query \"$ENV{'QUERY_STRING'}\"");
}
if (&forbidden_file($fullname)) {
&fatal("403 Forbidden", "Access forbidden. This file is mentioned in \@DissallowRead");
return;
}
($pathname = $where) =~ s/(Attic\/)?[^\/]*$//;
($filename = $where) =~ s/^.*\///;
http_header();
navigateHeader ($scriptwhere,$pathname,$filename,$rev, "annotate");
print "<h3 align=center>Annotation of $pathname$filename, Revision $rev</h3>\n";
# this seems to be necessary
$| = 1; $| = 0; # Flush
# this annotate version is based on the
# cvs annotate-demo Perl script by Cyclic Software
# It was written by Cyclic Software, http://www.cyclic.com/, and is in
# the public domain.
# we could abandon the use of rlog, rcsdiff and co using
# the cvsserver in a similiar way one day (..after rewrite)
$pid = open2($reader, $writer, "cvs server") || fatal ("500 Internal Error",
"Fatal Error - unable to open cvs for annotation");
# OK, first send the request to the server. A simplified example is:
# Root /home/kingdon/zwork/cvsroot
# Argument foo/xx
# Directory foo
# /home/kingdon/zwork/cvsroot/foo
# Directory .
# /home/kingdon/zwork/cvsroot
# annotate
# although as you can see there are a few more details.
print $writer "Root $cvsroot\n";
print $writer "Valid-responses ok error Valid-requests Checked-in Updated Merged Removed M E\n";
# Don't worry about sending valid-requests, the server just needs to
# support "annotate" and if it doesn't, there isn't anything to be done.
print $writer "UseUnchanged\n";
print $writer "Argument -r\n";
print $writer "Argument $rev\n";
print $writer "Argument $where\n";
# The protocol requires us to fully fake a working directory (at
# least to the point of including the directories down to the one
# containing the file in question).
# So if $where is "dir/sdir/file", then @dirs will be ("dir","sdir","file")
my @dirs = split('/', $where);
my $path = "";
foreach (@dirs) {
if ($path eq "") {
# In our example, $_ is "dir".
$path = $_;
}
else {
print $writer "Directory $path\n";
print $writer "$cvsroot/$path\n";
# In our example, $_ is "sdir" and $path becomes "dir/sdir"
# And the next time, "file" and "dir/sdir/file" (which then gets
# ignored, because we don't need to send Directory for the file).
$path .= "/$_";
}
}
# And the last "Directory" before "annotate" is the top level.
print $writer "Directory .\n";
print $writer "$cvsroot\n";
print $writer "annotate\n";
# OK, we've sent our command to the server. Thing to do is to
# close the writer side and get all the responses. If "cvs server"
# were nicer about buffering, then we could just leave it open, I think.
close ($writer) || die "cannot close: $!";
# Ready to get the responses from the server.
# For example:
# E Annotations for foo/xx
# E ***************
# M 1.3 (kingdon 06-Sep-97): hello
# ok
my ($lineNr) = 0;
my ($oldLrev, $oldLusr) = ("", "");
my ($revprint, $usrprint);
if ($annTable) {
print "<table border=0 cellspacing=0 cellpadding=0>\n";
}
else {
print "<pre>";
}
while (<$reader>) {
my @words = split;
# Adding one is for the (single) space which follows $words[0].
my $rest = substr ($_, length ($words[0]) + 1);
if ($words[0] eq "E") {
next;
}
elsif ($words[0] eq "M") {
$lineNr++;
my $lrev = substr ($_, 2, 13);
my $lusr = substr ($_, 16, 9);
my $line = substr ($_, 36);
# we should parse the date here ..
if ($lrev eq $oldLrev) {
$revprint = " ";
}
else {
$revprint = $lrev; $oldLusr = "";
}
if ($lusr eq $oldLusr) {
$usrprint = " ";
}
else {
$usrprint = $lusr;
}
$oldLrev = $lrev;
$oldLusr = $lusr;
# is there a less timeconsuming way to strip spaces ?
($lrev = $lrev) =~ s/\s+//g;
my $isCurrentRev = ("$rev" eq "$lrev");
print "<b>" if ($isCurrentRev);
printf ("%8s%s%8s %4d:", $revprint, ($isCurrentRev ? "|" : " "), $usrprint, $lineNr);
print spacedHtmlText($line);
print "</b>" if ($isCurrentRev);
}
elsif ($words[0] eq "ok") {
# We could complain about any text received after this, like the
# CVS command line client. But for simplicity, we don't.
}
elsif ($words[0] eq "error") {
fatal ("500 Internal Error", "Error occured during annotate: <b>$_</b>");
}
}
if ($annTable) {
print "</table>";
}
else {
print "</pre>";
}
close ($reader) || warn "cannot close: $!";
wait;
}
###############################
# make Checkout
###############################
sub doCheckout($$) {
my ($fullname, $rev) = @_;
my ($mimetype,$revopt);
my $fh = do {local(*FH);};
if ($rev eq 'HEAD' || $rev eq '.') {
$rev = undef;
}
# make sure the revisions a wellformed, for security
# reasons ..
if (defined($rev) && !($rev =~ /^[\d\.]+$/)) {
&fatal("404 Not Found",
"Malformed query \"$ENV{'QUERY_STRING'}\"");
}
if (&forbidden_file($fullname)) {
&fatal("403 Forbidden", "Access forbidden. This file is mentioned in \@DissallowRead");
return;
}
# get mimetype
if (defined($input{"content-type"}) && ($input{"content-type"} =~ /\S\/\S/)) {
$mimetype = $input{"content-type"}
}
else {
$mimetype = &getMimeTypeFromSuffix($fullname);
}
if (defined($rev)) {
$revopt = "-r$rev";
if ($use_moddate) {
readLog($fullname,$rev);
$moddate=$date{$rev};
}
}
else {
$revopt = "-rHEAD";
if ($use_moddate) {
readLog($fullname);
$moddate=$date{$symrev{HEAD}};
}
}
### just for the record:
### 'cvs co' seems to have a bug regarding single checkout of
### directories/files having spaces in it;
### this is an issue that should be resolved on cvs's side
#
# Safely for a child process to read from.
if (! open($fh, "-|")) { # child
open(STDERR, ">&STDOUT"); # Redirect stderr to stdout
exec("cvs", "-d", "$cvsroot", "co", "-p", "$revopt", "$where");
}
#===================================================================
#Checking out squid/src/ftp.c
#RCS: /usr/src/CVS/squid/src/ftp.c,v
#VERS: 1.1.1.28.6.2
#***************
# Parse CVS header
my ($revision, $filename, $cvsheader);
$filename = "";
while(<$fh>) {
last if (/^\*\*\*\*/);
$revision = $1 if (/^VERS: (.*)$/);
if (/^Checking out (.*)$/) {
$filename = $1;
$filename =~ s/^\.\/*//;
}
$cvsheader .= $_;
}
if ($filename ne $where) {
&fatal("500 Internal Error",
"Unexpected output from cvs co: $cvsheader"
. "<p><b>Check whether the directory $cvsroot/CVSROOT exists "
. "and the script has write-access to the CVSROOT/history "
. "file if it exists."
. "<br>The script needs to place lock files in the "
. "directory the file is in as well.</b>");
}
$| = 1;
if ($mimetype eq "text/x-cvsweb-markup") {
&cvswebMarkup($fh,$fullname,$revision);
}
else {
http_header($mimetype);
print <$fh>;
}
close($fh);
}
sub cvswebMarkup($$$) {
my ($filehandle,$fullname,$revision) = @_;
my ($pathname, $filename);
($pathname = $where) =~ s/(Attic\/)?[^\/]*$//;
($filename = $where) =~ s/^.*\///;
my ($fileurl) = urlencode($filename);
http_header();
navigateHeader ($scriptwhere, $pathname, $filename, $revision, "view");
print "<HR noshade>";
print "<table width=\"100%\"><tr><td bgcolor=\"$markupLogColor\">";
print "File: ", &clickablePath($where, 1);
print " ";
&download_link(urlencode($fileurl), $revision, "(download)");
if (!$defaultTextPlain) {
print " ";
&download_link(urlencode($fileurl), $revision, "(as text)",
"text/plain");
}
print "<BR>\n";
if ($show_log_in_markup) {
readLog($fullname); #,$revision);
printLog($revision,0);
}
else {
print "Version: <B>$revision</B><BR>\n";
print "Tag: <B>", $input{only_with_tag}, "</b><br>\n" if
$input{only_with_tag};
}
print "</td></tr></table>";
my @content = <$filehandle>;
my $url = download_url($fileurl, $revision, $mimetype);
print "<HR noshade>";
if ($mimetype =~ /^image/) {
print "<IMG SRC=\"$url$barequery\"><BR>";
}
elsif ($mimetype =~ m%^application/pdf%) {
print "<EMBED SRC=\"$url$barequery\" WIDTH=\"100%\"><BR>";
}
else {
print "<PRE>";
foreach (@content) {
print spacedHtmlText($_);
}
print "</PRE>";
}
}
sub viewable($) {
my ($mimetype) = @_;
$mimetype =~ m%^text/% ||
$mimetype =~ m%^image/% ||
$mimetype =~ m%^application/pdf% ||
0;
}
###############################
# Show Colored Diff
###############################
sub doDiff($$$$$$) {
my($fullname, $r1, $tr1, $r2, $tr2, $f) = @_;
my $fh = do {local(*FH);};
my ($rev1, $rev2, $sym1, $sym2, @difftype, $diffname, $f1, $f2);
if (&forbidden_file($fullname)) {
&fatal("403 Forbidden", "Access forbidden. This file is mentioned in \@DissallowRead");
return;
}
if ($r1 =~ /([^:]+)(:(.+))?/) {
$rev1 = $1;
$sym1 = $3;
}
if ($r1 eq 'text') {
$rev1 = $tr1;
$sym1 = "";
}
if ($r2 =~ /([^:]+)(:(.+))?/) {
$rev2 = $1;
$sym2 = $3;
}
if ($r2 eq 'text') {
$rev2 = $tr2;
$sym2 = "";
}
# make sure the revisions a wellformed, for security
# reasons ..
if (!($rev1 =~ /^[\d\.]+$/) || !($rev2 =~ /^[\d\.]+$/)) {
&fatal("404 Not Found",
"Malformed query \"$ENV{'QUERY_STRING'}\"");
}
#
# rev1 and rev2 are now both numeric revisions.
# Thus we do a DWIM here and swap them if rev1 is after rev2.
# XXX should we warn about the fact that we do this?
if (&revcmp($rev1,$rev2) > 0) {
my ($tmp1, $tmp2) = ($rev1, $sym1);
($rev1, $sym1) = ($rev2, $sym2);
($rev2, $sym2) = ($tmp1, $tmp2);
}
my $human_readable = 0;
if ($f eq 'c') {
@difftype = qw{-c};
$diffname = "Context diff";
}
elsif ($f eq 's') {
@difftype = qw{--side-by-side --width=164};
$diffname = "Side by Side";
}
elsif ($f eq 'H') {
$human_readable = 1;
@difftype = qw{--unified=15};
$diffname = "Long Human readable";
}
elsif ($f eq 'h') {
@difftype =qw{-u};
$human_readable = 1;
$diffname = "Human readable";
}
elsif ($f eq 'u') {
@difftype = qw{-u};
$diffname = "Unidiff";
}
else {
fatal ("400 Bad arguments", "Diff format $f not understood");
}
# apply special options
if ($human_readable) {
if ($hr_funout) {
push @difftype, '-p';
}
if ($hr_ignwhite) {
push @difftype, '-w';
}
if ($hr_ignkeysubst) {
push @difftype, '-kk';
}
}
if (! open($fh, "-|")) { # child
open(STDERR, ">&STDOUT"); # Redirect stderr to stdout
exec("rcsdiff",@difftype,"-r$rev1","-r$rev2",$fullname);
}
if ($human_readable) {
http_header();
&human_readable_diff($fh, $rev2);
gzipclose();
exit;
}
else {
http_header("text/plain");
}
#
#===================================================================
#RCS file: /home/ncvs/src/sys/netinet/tcp_output.c,v
#retrieving revision 1.16
#retrieving revision 1.17
#diff -c -r1.16 -r1.17
#*** /home/ncvs/src/sys/netinet/tcp_output.c 1995/11/03 22:08:08 1.16
#--- /home/ncvs/src/sys/netinet/tcp_output.c 1995/12/05 17:46:35 1.17
#
# Ideas:
# - nuke the stderr output if it's what we expect it to be
# - Add "no differences found" if the diff command supplied no output.
#
#*** src/sys/netinet/tcp_output.c 1995/11/03 22:08:08 1.16
#--- src/sys/netinet/tcp_output.c 1995/12/05 17:46:35 1.17 RELENG_2_1_0
# (bogus example, but...)
#
if (grep { $_ eq '-u'} @difftype) {
$f1 = '---';
$f2 = '\+\+\+';
}
else {
$f1 = '\*\*\*';
$f2 = '---';
}
while (<$fh>) {
if (m|^$f1 $cvsroot|o) {
s|$cvsroot/||o;
if ($sym1) {
chop;
$_ .= " $sym1\n";
}
}
elsif (m|^$f2 $cvsroot|o) {
s|$cvsroot/||o;
if ($sym2) {
chop;
$_ .= " $sym2\n";
}
}
print $_;
}
close($fh);
}
###############################
# Show Logs ..
###############################
sub getDirLogs($$@) {
my ($cvsroot,$dirname,@otherFiles) = @_;
my ($state,$otherFiles,$tag, $file, $date, $branchpoint, $branch, $log);
my ($rev, $revision, $revwanted, $filename, $head, $author);
$tag = $input{only_with_tag};
my ($DirName) = "$cvsroot/$where";
my (@files, @filetags);
my $fh = do {local(*FH);};
push(@files, &safeglob("$DirName/*,v"));
push(@files, &safeglob("$DirName/Attic/*,v")) if (!$input{'hideattic'});
foreach $file (@otherFiles) {
push(@files, "$DirName/$file");
}
# just execute rlog if there are any files
if ($#files < 0) {
return;
}
if (defined($tag)) {
#can't use -r<tag> as - is allowed in tagnames, but misinterpreated by rlog..
if (! open($fh, "-|")) {
open(STDERR, "> /dev/null"); # rlog may complain; ignore.
exec($no_rlog ? ( "cvs", "log") : ( "rlog" ) ,@files);
}
}
else {
my $kidpid = open($fh, "-|");
if (! $kidpid) {
open(STDERR, "> /dev/null"); # rlog may complain; ignore.
exec($no_rlog ? ( "cvs", "log" ) : ( "rlog" ),"-r",@files);
}
}
$state = "start";
while (<$fh>) {
if ($state eq "start") {
#Next file. Initialize file variables
$rev = undef;
$revwanted = undef;
$branch = undef;
$branchpoint = undef;
$filename = undef;
$log = undef;
$revision = undef;
$branch = undef;
%symrev = ();
@filetags = ();
#jump to head state
$state = "head";
}
print "$state:$_" if ($verbose);
again:
if ($state eq "head") {
#$rcsfile = $1 if (/^RCS file: (.+)$/); #not used (yet)
$filename = $1 if (/^Working file: (.+)$/);
$head = $1 if (/^head: (.+)$/);
$branch = $1 if (/^branch: (.+)$/);
}
if ($state eq "head" && /^symbolic names/) {
$state = "tags";
($branch = $head) =~ s/\.\d+$// if (!defined($branch));
$branch =~ s/(\.?)(\d+)$/${1}0.$2/;
$symrev{MAIN} = $branch;
$symrev{HEAD} = $branch;
$alltags{MAIN} = 1;
$alltags{HEAD} = 1;
push (@filetags, "MAIN", "HEAD");
next;
}
if ($state eq "tags" &&
/^\s+(.+):\s+([\d\.]+)\s+$/) {
push (@filetags, $1);
$symrev{$1} = $2;
$alltags{$1} = 1;
next;
}
if ($state eq "tags" && /^\S/) {
if (defined($tag) && (defined($symrev{$tag}) || $tag eq "HEAD")) {
$revwanted = $tag eq "HEAD" ? $symrev{"MAIN"} : $symrev{$tag};
($branch = $revwanted) =~ s/\.0\././;
($branchpoint = $branch) =~ s/\.?\d+$//;
$revwanted = undef if ($revwanted ne $branch);
}
elsif (defined($tag) && $tag ne "HEAD") {
print "Tag not found, skip this file" if ($verbose);
$state = "skip";
next;
}
foreach my $tagfound (@filetags) {
$tags{$tagfound} = 1;
}
$state = "head";
goto again;
}
if ($state eq "head" && /^----------------------------$/) {
$state = "log";
$rev = undef;
$date = undef;
$log = "";
# Try to reconstruct the relative filename if RCS spits out a full path
$filename =~ s%^\Q$DirName\E/%%;
next;
}
if ($state eq "log") {
if (/^----------------------------$/
|| /^=============================/) {
# End of a log entry.
my $revbranch;
($revbranch = $rev) =~ s/\.\d+$//;
print "$filename $rev Wanted: $revwanted "
. "Revbranch: $revbranch Branch: $branch "
. "Branchpoint: $branchpoint\n" if ($verbose);
if (!defined($revwanted) && defined($branch)
&& $branch eq $revbranch || !defined($tag)) {
print "File revision $rev found for branch $branch\n"
if ($verbose);
$revwanted = $rev;
}
if (defined($revwanted) ? $rev eq $revwanted :
defined($branchpoint) ? $rev eq $branchpoint :
0 && ($rev eq $head)) { # Don't think head is needed here..
print "File info $rev found for $filename\n" if ($verbose);
my @finfo = ($rev,$date,$log,$author,$filename);
my ($name);
($name = $filename) =~ s%/.*%%;
$fileinfo{$name} = [ @finfo ];
$state = "done" if (defined($revwanted) && $rev eq $revwanted);
}
$rev = undef;
$date = undef;
$log = "";
}
elsif (!defined($date) && m|^date:\s+(\d+)/(\d+)/(\d+)\s+(\d+):(\d+):(\d+);|) {
my $yr = $1;
# damn 2-digit year routines :-)
if ($yr > 100) {
$yr -= 1900;
}
$date = &Time::Local::timegm($6,$5,$4,$3,$2 - 1,$yr);
($author) = /author: ([^;]+)/;
$state = "log";
$log = '';
next;
}
elsif (!defined($rev) && m/^revision (.*)$/) {
$rev = $1;
next;
}
else {
$log = $log . $_;
}
}
if (/^===============/) {
$state = "start";
next;
}
}
if ($. == 0) {
fatal("500 Internal Error",
"Failed to spawn GNU rlog on <em>'".join(", ", @files)."'</em><p>did you set the <b>\$ENV{PATH}</b> in your configuration file correctly ?");
}
close($fh);
}
sub readLog($;$) {
my($fullname,$revision) = @_;
my ($symnames, $head, $rev, $br, $brp, $branch, $branchrev);
my $fh = do {local(*FH);};
if (defined($revision)) {
$revision = "-r$revision";
}
else {
$revision = "";
}
undef %symrev;
undef %revsym;
undef @allrevisions;
undef %date;
undef %author;
undef %state;
undef %difflines;
undef %log;
print("Going to rlog '$fullname'\n") if ($verbose);
if (! open($fh, "-|")) { # child
if ($revision ne '') {
exec($no_rlog ? ( "cvs", "log" ) : ( "rlog" ),$revision,$fullname);
}
else {
exec($no_rlog ? ( "cvs", "log" ) : ( "rlog" ),$fullname);
}
}
while (<$fh>) {
print if ($verbose);
if ($symnames) {
if (/^\s+([^:]+):\s+([\d\.]+)/) {
$symrev{$1} = $2;
}
else {
$symnames = 0;
}
}
elsif (/^head:\s+([\d\.]+)/) {
$head = $1;
}
elsif (/^branch:\s+([\d\.]+)/) {
$curbranch = $1;
}
elsif (/^symbolic names/) {
$symnames = 1;
}
elsif (/^-----/) {
last;
}
}
($curbranch = $head) =~ s/\.\d+$// if (!defined($curbranch));
# each log entry is of the form:
# ----------------------------
# revision 3.7.1.1
# date: 1995/11/29 22:15:52; author: fenner; state: Exp; lines: +5 -3
# log info
# ----------------------------
logentry:
while (!/^=========/) {
$_ = <$fh>;
last logentry if (!defined($_)); # EOF
print "R:", $_ if ($verbose);
if (/^revision ([\d\.]+)/) {
$rev = $1;
unshift(@allrevisions,$rev);
}
elsif (/^========/ || /^----------------------------$/) {
next logentry;
}
else {
# The rlog output is syntactically ambiguous. We must
# have guessed wrong about where the end of the last log
# message was.
# Since this is likely to happen when people put rlog output
# in their commit messages, don't even bother keeping
# these lines since we don't know what revision they go with
# any more.
next logentry;
# &fatal("500 Internal Error","Error parsing RCS output: $_");
}
$_ = <$fh>;
print "D:", $_ if ($verbose);
if (m|^date:\s+(\d+)/(\d+)/(\d+)\s+(\d+):(\d+):(\d+);\s+author:\s+(\S+);\s+state:\s+(\S+);\s+(lines:\s+([0-9\s+-]+))?|) {
my $yr = $1;
# damn 2-digit year routines :-)
if ($yr > 100) {
$yr -= 1900;
}
$date{$rev} = &Time::Local::timegm($6,$5,$4,$3,$2 - 1,$yr);
$author{$rev} = $7;
$state{$rev} = $8;
$difflines{$rev} = $10;
}
else {
&fatal("500 Internal Error", "Error parsing RCS output: $_");
}
line:
while (<$fh>) {
print "L:", $_ if ($verbose);
next line if (/^branches:\s/);
last line if (/^----------------------------$/ || /^=========/);
$log{$rev} .= $_;
}
print "E:", $_ if ($verbose);
}
close($fh);
print "Done reading RCS file\n" if ($verbose);
@revorder = reverse sort {revcmp($a,$b)} @allrevisions;
print "Done sorting revisions",join(" ",@revorder),"\n" if ($verbose);
#
# HEAD is an artificial tag which is simply the highest tag number on the main
# branch, unless there is a branch tag in the RCS file in which case it's the
# highest revision on that branch. Find it by looking through @revorder; it
# is the first commit listed on the appropriate branch.
# This is not neccesary the same revision as marked as head in the RCS file.
my $headrev = $curbranch || "1";
($symrev{"MAIN"} = $headrev) =~ s/(\.?)(\d+)$/${1}0.$2/;
revision:
foreach $rev (@revorder) {
if ($rev =~ /^(\S*)\.\d+$/ && $headrev eq $1) {
$symrev{"HEAD"} = $rev;
last revision;
}
}
($symrev{"HEAD"} = $headrev) =~ s/\.\d+$//
if (!defined($symrev{"HEAD"}));
print "Done finding HEAD\n" if ($verbose);
#
# Now that we know all of the revision numbers, we can associate
# absolute revision numbers with all of the symbolic names, and
# pass them to the form so that the same association doesn't have
# to be built then.
#
undef @branchnames;
undef %branchpoint;
undef $sel;
foreach (reverse sort keys %symrev) {
$rev = $symrev{$_};
if ($rev =~ /^((.*)\.)0\.(\d+)$/) {
push(@branchnames, $_);
#
# A revision number of A.B.0.D really translates into
# "the highest current revision on branch A.B.D".
#
# If there is no branch A.B.D, then it translates into
# the head A.B .
#
# This reasoning also applies to the main branch A.B,
# with the branch number 0.A, with the exception that
# it has no head to translate to if there is nothing on
# the branch, but I guess this can never happen?
#
# Since some stupid people actually import/check in
# files with version 0.X we assume that the above cannot
# happen, and regard 0.X(.*) as a revision and not a branch.
#
$head = defined($2) ? $2 : "";
$branch = $3;
$branchrev = $head . ($head ne "" ? "." : "") . $branch;
my $regex;
($regex = $branchrev) =~ s/\./\\./g;
$rev = $head;
revision:
foreach my $r (@revorder) {
if ($r =~ /^${regex}\b/) {
$rev = $branchrev;
last revision;
}
}
next if ($rev eq "");
if ($rev ne $head && $head ne "") {
$branchpoint{$head} .= ", " if ($branchpoint{$head});
$branchpoint{$head} .= $_;
}
}
$revsym{$rev} .= ", " if ($revsym{$rev});
$revsym{$rev} .= $_;
$sel .= "<OPTION VALUE=\"${rev}:${_}\">$_\n";
}
print "Done associating revisions with branches\n" if ($verbose);
my ($onlyonbranch, $onlybranchpoint);
if ($onlyonbranch = $input{'only_with_tag'}) {
$onlyonbranch = $symrev{$onlyonbranch};
if ($onlyonbranch =~ s/\.0\././) {
($onlybranchpoint = $onlyonbranch) =~ s/\.\d+$//;
}
else {
$onlybranchpoint = $onlyonbranch;
}
if (!defined($onlyonbranch) || $onlybranchpoint eq "") {
fatal("404 Tag not found","Tag $input{'only_with_tag'} not defined");
}
}
undef @revisions;
foreach (@allrevisions) {
($br = $_) =~ s/\.\d+$//;
($brp = $br) =~ s/\.\d+$//;
next if ($onlyonbranch && $br ne $onlyonbranch &&
$_ ne $onlybranchpoint);
unshift(@revisions,$_);
}
if ($logsort eq "date") {
# Sort the revisions in commit order an secondary sort on revision
# (secondary sort needed for imported sources, or the first main
# revision gets before the same revision on the 1.1.1 branch)
@revdisplayorder = sort {$date{$b} <=> $date{$a} || -revcmp($a, $b)} @revisions;
}
elsif ($logsort eq "rev") {
# Sort the revisions in revision order, highest first
@revdisplayorder = reverse sort {revcmp($a,$b)} @revisions;
}
else {
# No sorting. Present in the same order as rlog / cvs log
@revdisplayorder = @revisions;
}
}
sub printLog($;$) {
my ($link, $br, $brp);
($_,$link) = @_;
($br = $_) =~ s/\.\d+$//;
($brp = $br) =~ s/\.?\d+$//;
my ($isDead, $prev);
$link = 1 if (!defined($link));
$isDead = ($state{$_} eq "dead");
if ($link && !$isDead) {
my ($filename);
($filename = $where) =~ s/^.*\///;
my ($fileurl) = urlencode($filename);
print "<a NAME=\"rev$_\"></a>";
if (defined($revsym{$_})) {
foreach my $sym (split(", ", $revsym{$_})) {
print "<a NAME=\"$sym\"></a>";
}
}
if (defined($revsym{$br}) && $revsym{$br} && !defined($nameprinted{$br})) {
foreach my $sym (split(", ", $revsym{$br})) {
print "<a NAME=\"$sym\"></a>";
}
$nameprinted{$br} = 1;
}
print "\n Revision ";
&download_link($fileurl, $_, $_,
$defaultViewable ? "text/x-cvsweb-markup" : undef);
if ($defaultViewable) {
print " / ";
&download_link($fileurl, $_, "(download)", $mimetype);
}
if (not $defaultTextPlain) {
print " / ";
&download_link($fileurl, $_, "(as text)",
"text/plain");
}
if (!$defaultViewable) {
print " / ";
&download_link($fileurl, $_, "(view)", "text/x-cvsweb-markup");
}
if ($allow_annotate) {
print " - <a href=\"" . $scriptname . "/" . urlencode($where) . "?annotate=$_$barequery\">";
print "annotate</a>";
}
# Plus a select link if enabled, and this version isn't selected
if ($allow_version_select) {
if ((!defined($input{"r1"}) || $input{"r1"} ne $_)) {
print " - <A HREF=\"${scriptwhere}?r1=$_$barequery" .
"\">[select for diffs]</A>\n";
}
else {
print " - <b>[selected]</b>";
}
}
}
else {
print "Revision <B>$_</B>";
}
if (/^1\.1\.1\.\d+$/) {
print " <i>(vendor branch)</i>";
}
if (defined @mytz) {
my ($est) = $mytz[(localtime($date{$_}))[8]];
print ", <i>" . scalar localtime($date{$_}) . " $est</i> (";
} else {
print ", <i>" . scalar gmtime($date{$_}) . " UTC</i> (";
}
print readableTime(time() - $date{$_},1) . " ago)";
print " by ";
print "<i>" . $author{$_} . "</i>\n";
print "<BR>Branch: <b>",$link?link_tags($revsym{$br}):$revsym{$br},"</b>\n"
if ($revsym{$br});
print "<BR>CVS Tags: <b>",$link?link_tags($revsym{$_}):$revsym{$_},"</b>"
if ($revsym{$_});
print "<BR>Branch point for: <b>",$link?link_tags($branchpoint{$_}):$branchpoint{$_},"</b>\n"
if ($branchpoint{$_});
# Find the previous revision
my @prevrev = split(/\./, $_);
do {
if (--$prevrev[$#prevrev] <= 0) {
# If it was X.Y.Z.1, just make it X.Y
pop(@prevrev);
pop(@prevrev);
}
$prev = join(".", @prevrev);
} until (defined($date{$prev}) || $prev eq "");
if ($prev ne "") {
if ($difflines{$_}) {
print "<BR>Changes since <b>$prev: $difflines{$_} lines</b>";
}
}
if ($isDead) {
print "<BR><B><I>FILE REMOVED</I></B>\n";
}
elsif ($link) {
my %diffrev = ();
$diffrev{$_} = 1;
$diffrev{""} = 1;
print "<BR>Diff";
#
# Offer diff to previous revision
if ($prev) {
$diffrev{$prev} = 1;
print " to previous <A HREF=\"${scriptwhere}.diff?r1=$prev";
print "&r2=$_" . $barequery . "\">$prev</A>\n";
if (!$hr_default) { # offer a human readable version if not default
print "(<A HREF=\"${scriptwhere}.diff?r1=$prev";
print "&r2=$_" . $barequery . "&f=h\">colored</A>)\n";
}
}
#
# Plus, if it's on a branch, and it's not a vendor branch,
# offer a diff with the branch point.
if ($revsym{$brp} && !/^1\.1\.1\.\d+$/ && !defined($diffrev{$brp})) {
print " to branchpoint <A HREF=\"${scriptwhere}.diff?r1=$brp";
print "&r2=$_" . $barequery . "\">$brp</A>\n";
if (!$hr_default) { # offer a human readable version if not default
print "(<A HREF=\"${scriptwhere}.diff?r1=$brp";
print "&r2=$_" . $barequery . "&f=h\">colored</A>)\n";
}
}
#
# Plus, if it's on a branch, and it's not a vendor branch,
# offer to diff with the next revision of the higher branch.
# (e.g. change gets committed and then brought
# over to -stable)
if (/^\d+\.\d+\.\d+/ && !/^1\.1\.1\.\d+$/) {
my ($i,$nextmain);
for ($i = 0; $i < $#revorder && $revorder[$i] ne $_; $i++){}
my (@tmp2) = split(/\./, $_);
for ($nextmain = ""; $i > 0; $i--) {
my ($next) = $revorder[$i-1];
my (@tmp1) = split(/\./, $next);
if ($#tmp1 < $#tmp2) {
$nextmain = $next;
last;
}
# Only the highest version on a branch should have
# a diff for the "next main".
last if ($#tmp1 == $#tmp2 && join(".",@tmp1[0..$#tmp1-1])
eq join(".",@tmp2[0..$#tmp1-1]));
}
if (!defined($diffrev{$nextmain})) {
$diffrev{$nextmain} = 1;
print " next main <A HREF=\"${scriptwhere}.diff?r1=$nextmain";
print "&r2=$_" . $barequery .
"\">$nextmain</A>\n";
if (!$hr_default) { # offer a human readable version if not default
print "(<A HREF=\"${scriptwhere}.diff?r1=$nextmain";
print "&r2=$_" . $barequery .
"&f=h\">colored</A>)\n";
}
}
}
# Plus if user has selected only r1, then present a link
# to make a diff to that revision
if (defined($input{"r1"}) && !defined($diffrev{$input{"r1"}})) {
$diffrev{$input{"r1"}} = 1;
print " to selected <A HREF=\"${scriptwhere}.diff?"
. "r1=$input{'r1'}&r2=$_" . $barequery
. "\">$input{'r1'}</A>\n";
if (!$hr_default) { # offer a human readable version if not default
print "(<A HREF=\"${scriptwhere}.diff?r1=$input{'r1'}";
print "&r2=$_" . $barequery .
"&f=h\">colored</A>)\n";
}
}
}
print "<PRE>\n";
print &htmlify($log{$_});
print "</PRE>\n";
}
sub doLog($) {
my($fullname) = @_;
my ($diffrev, $upwhere, $filename, $backurl);
readLog($fullname);
html_header("CVS log for $where");
($upwhere = $where) =~ s|(Attic/)?[^/]+$||;
($filename = $where) =~ s|^.*/||;
$backurl = $scriptname . "/" . urlencode($upwhere) . $query;
print &link($backicon, "$backurl#$filename"),
" <b>Up to ", &clickablePath($upwhere, 1), "</b><p>\n";
print "<A HREF=\"#diff\">Request diff between arbitrary revisions</A>\n";
print "<HR NOSHADE>\n";
if ($curbranch) {
print "Default branch: ";
print ($revsym{$curbranch} || $curbranch);
}
else {
print "No default branch";
}
print "<BR>\n";
if ($input{only_with_tag}) {
print "Current tag: $input{only_with_tag}<BR>\n";
}
undef %nameprinted;
for (my $i = 0; $i <= $#revdisplayorder; $i++) {
print "<HR size=1 NOSHADE>";
printLog($revdisplayorder[$i]);
}
print "<HR NOSHADE>";
print "<A NAME=diff>\n";
print "This form allows you to request diff's between any two\n";
print "revisions of a file. You may select a symbolic revision\n";
print "name using the selection box or you may type in a numeric\n";
print "name using the type-in text box.\n";
print "</A><P>\n";
print "<FORM METHOD=\"GET\" ACTION=\"${scriptwhere}.diff\" NAME=\"diff_select\">\n";
foreach (@stickyvars) {
print "<INPUT TYPE=HIDDEN NAME=\"$_\" VALUE=\"$input{$_}\">\n"
if (defined($input{$_})
&& ((!defined($DEFAULTVALUE{$_})
|| $input{$_} ne $DEFAULTVALUE{$_})
&& $input{$_} ne ""));
}
print "Diffs between \n";
print "<SELECT NAME=\"r1\">\n";
print "<OPTION VALUE=\"text\" SELECTED>Use Text Field\n";
print $sel;
print "</SELECT>\n";
$diffrev = $revdisplayorder[$#revdisplayorder];
$diffrev = $input{"r1"} if (defined($input{"r1"}));
print "<INPUT TYPE=\"TEXT\" SIZE=\"$inputTextSize\" NAME=\"tr1\" VALUE=\"$diffrev\" onChange='document.diff_select.r1.selectedIndex=0'>\n";
print " and \n";
print "<SELECT NAME=\"r2\">\n";
print "<OPTION VALUE=\"text\" SELECTED>Use Text Field\n";
print $sel;
print "</SELECT>\n";
$diffrev = $revdisplayorder[0];
$diffrev = $input{"r2"} if (defined($input{"r2"}));
print "<INPUT TYPE=\"TEXT\" SIZE=\"$inputTextSize\" NAME=\"tr2\" VALUE=\"$diffrev\" onChange='document.diff_select.r2.selectedIndex=0'>\n";
print "<BR>Type of Diff should be a ";
printDiffSelect(0);
print "<INPUT TYPE=SUBMIT VALUE=\" Get Diffs \">\n";
print "</FORM>\n";
print "<HR noshade>\n";
if (@branchnames) {
print "<A name=branch></A>\n";
print "<FORM METHOD=\"GET\" ACTION=\"$scriptwhere\">\n";
foreach (@stickyvars) {
next if ($_ eq "only_with_tag");
next if ($_ eq "logsort");
print "<INPUT TYPE=HIDDEN NAME=\"$_\" VALUE=\"$input{$_}\">\n"
if (defined($input{$_})
&& (!defined($DEFAULTVALUE{$_})
|| $input{$_} ne $DEFAULTVALUE{$_})
&& $input{$_} ne "");
}
print "View only Branch: \n";
print "<SELECT NAME=\"only_with_tag\"";
print " onchange=\"submit()\"" if ($use_java_script);
print ">\n";
print "<OPTION VALUE=\"\"";
print " SELECTED" if (defined($input{"only_with_tag"}) &&
$input{"only_with_tag"} eq "");
print ">Show all branches\n";
foreach (reverse sort @branchnames) {
print "<OPTION";
print " SELECTED" if (defined($input{"only_with_tag"})
&& $input{"only_with_tag"} eq $_);
print ">${_}\n";
}
print "</SELECT>\n";
print "<INPUT TYPE=SUBMIT VALUE=\" View Branch \">\n";
print "</FORM>\n";
}
print "<A name=logsort></A>\n";
print "<FORM METHOD=\"GET\" ACTION=\"$scriptwhere\">\n";
foreach (@stickyvars) {
next if ($_ eq "only_with_tag");
next if ($_ eq "logsort");
print "<INPUT TYPE=HIDDEN NAME=\"$_\" VALUE=\"$input{$_}\">\n"
if (defined($input{$_})
&& (!defined($DEFAULTVALUE{$_})
|| $input{$_} ne $DEFAULTVALUE{$_})
&& $input{$_} ne "");
}
print "Sort log by: \n";
print "<SELECT NAME=\"logsort\"";
print " onchange=\"submit()\"" if ($use_java_script);
print ">\n";
print "<OPTION VALUE=cvs",$logsort eq "cvs" ? " SELECTED" : "", ">Not sorted";
print "<OPTION VALUE=date",$logsort eq "date" ? " SELECTED" : "", ">Commit date";
print "<OPTION VALUE=rev",$logsort eq "rev" ? " SELECTED" : "", ">Revision";
print "</SELECT>\n";
print "<INPUT TYPE=SUBMIT VALUE=\" Sort \">\n";
print "</FORM>\n";
print &html_footer;
print "</BODY></HTML>\n";
}
sub flush_diff_rows ($$$$)
{
my $j;
my ($leftColRef,$rightColRef,$leftRow,$rightRow) = @_;
if (!defined($state)) {
return;
}
if ($state eq "PreChangeRemove") { # we just got remove-lines before
for ($j = 0 ; $j < $leftRow; $j++) {
print "<tr><td bgcolor=\"$diffcolorRemove\">@$leftColRef[$j]</td>";
print "<td bgcolor=\"$diffcolorEmpty\"> </td></tr>\n";
}
}
elsif ($state eq "PreChange") { # state eq "PreChange"
# we got removes with subsequent adds
for ($j = 0; $j < $leftRow || $j < $rightRow ; $j++) { # dump out both cols
print "<tr>";
if ($j < $leftRow) {
print "<td bgcolor=\"$diffcolorChange\">@$leftColRef[$j]</td>";
}
else {
print "<td bgcolor=\"$diffcolorDarkChange\"> </td>";
}
if ($j < $rightRow) {
print "<td bgcolor=\"$diffcolorChange\">@$rightColRef[$j]</td>";
}
else {
print "<td bgcolor=\"$diffcolorDarkChange\"> </td>";
}
print "</tr>\n";
}
}
}
##
# Function to generate Human readable diff-files
# human_readable_diff(String revision_to_return_to);
##
sub human_readable_diff($){
my ($i,$difftxt, $where_nd, $filename, $pathname, $scriptwhere_nd);
my ($fh, $rev) = @_;
my ($date1, $date2, $r1d, $r2d, $r1r, $r2r, $rev1, $rev2, $sym1, $sym2);
my (@rightCol, @leftCol);
($where_nd = $where) =~ s/.diff$//;
($filename = $where_nd) =~ s/^.*\///;
($pathname = $where_nd) =~ s/(Attic\/)?[^\/]*$//;
($scriptwhere_nd = $scriptwhere) =~ s/.diff$//;
navigateHeader ($scriptwhere_nd, $pathname, $filename, $rev, "diff");
# Read header to pick up read revision and date, if possible
while (<$fh>) {
($r1d,$r1r) = /\t(.*)\t(.*)$/ if (/^--- /);
($r2d,$r2r) = /\t(.*)\t(.*)$/ if (/^\+\+\+ /);
last if (/^\+\+\+ /);
}
if (defined($r1r) && $r1r =~ /^(\d+\.)+\d+$/) {
$rev1 = $r1r;
$date1 = $r1d;
}
if (defined($r2r) && $r2r =~ /^(\d+\.)+\d+$/) {
$rev2 = $r2r;
$date2 = $r2d;
}
print "<h3 align=center>Diff for /$where_nd between version $rev1 and $rev2</h3>\n";
print "<table border=0 cellspacing=0 cellpadding=0 width=\"100%\">\n";
print "<tr bgcolor=\"#ffffff\">\n";
print "<th width=\"50%\" valign=TOP>";
print "version $rev1";
print ", $date1" if (defined($date1));
print "<br>Tag: $sym1\n" if ($sym1);
print "</th>\n";
print "<th width=\"50%\" valign=TOP>";
print "version $rev2";
print ", $date2" if (defined($date2));
print "<br>Tag: $sym2\n" if ($sym1);
print "</th>\n";
my $fs = "<font face=\"$difffontface\" size=\"$difffontsize\">";
my $fe = "</font>";
my $leftRow = 0;
my $rightRow = 0;
my ($oldline, $newline, $funname, $diffcode, $rest);
# Process diff text
# The diffrows are could make excellent use of
# cascading style sheets because we've to set the
# font and color for each row. anyone ...?
####
while (<$fh>) {
$difftxt = $_;
if ($difftxt =~ /^@@/) {
($oldline,$newline,$funname) = $difftxt =~ /@@ \-([0-9]+).*\+([0-9]+).*@@(.*)/;
print "<tr bgcolor=\"$diffcolorHeading\"><td width=\"50%\">";
print "<table width=\"100%\" border=1 cellpadding=5><tr><td><b>Line $oldline</b>";
print " <font size=-1>$funname</font></td></tr></table>";
print "</td><td width=\"50%\">";
print "<table width=\"100%\" border=1 cellpadding=5><tr><td><b>Line $newline</b>";
print " <font size=-1>$funname</font></td></tr></table>";
print "</td>\n";
$state = "dump";
$leftRow = 0;
$rightRow = 0;
}
else {
($diffcode,$rest) = $difftxt =~ /^([-+ ])(.*)/;
$_ = spacedHtmlText ($rest);
# Add fontface, size
$_ = "$fs $_$fe";
#########
# little state machine to parse unified-diff output (Hen, zeller@think.de)
# in order to get some nice 'ediff'-mode output
# states:
# "dump" - just dump the value
# "PreChangeRemove" - we began with '-' .. so this could be the start of a 'change' area or just remove
# "PreChange" - okey, we got several '-' lines and moved to '+' lines -> this is a change block
##########
if ($diffcode eq '+') {
if ($state eq "dump") { # 'change' never begins with '+': just dump out value
print "<tr><td bgcolor=\"$diffcolorEmpty\"> </td><td bgcolor=\"$diffcolorAdd\">$_</td></tr>\n";
}
else { # we got minus before
$state = "PreChange";
$rightCol[$rightRow++] = $_;
}
}
elsif ($diffcode eq '-') {
$state = "PreChangeRemove";
$leftCol[$leftRow++] = $_;
}
else { # empty diffcode
flush_diff_rows \@leftCol, \@rightCol, $leftRow, $rightRow;
print "<tr><td>$_</td><td>$_</td></tr>\n";
$state = "dump";
$leftRow = 0;
$rightRow = 0;
}
}
}
flush_diff_rows \@leftCol, \@rightCol, $leftRow, $rightRow;
# state is empty if we didn't have any change
if (!$state) {
print "<tr><td colspan=2> </td></tr>";
print "<tr bgcolor=\"$diffcolorEmpty\" >";
print "<td colspan=2 align=center><b>- No viewable Change -</b></td></tr>";
}
print "</table>";
close($fh);
print "<br><hr noshade width=\"100%\">\n";
print "<table border=0>";
print "<tr><td>";
# print legend
print "<table border=1><tr><td>";
print "Legend:<br><table border=0 cellspacing=0 cellpadding=1>\n";
print "<tr><td align=center bgcolor=\"$diffcolorRemove\">Removed from v.$rev1</td><td bgcolor=\"$diffcolorEmpty\"> </td></tr>";
print "<tr bgcolor=\"$diffcolorChange\"><td align=center colspan=2>changed lines</td></tr>";
print "<tr><td bgcolor=\"$diffcolorEmpty\"> </td><td align=center bgcolor=\"$diffcolorAdd\">Added in v.$rev2</td></tr>";
print "</table></td></tr></table>\n";
print "<td>";
# Print format selector
print "<FORM METHOD=\"GET\" ACTION=\"${scriptwhere}\">\n";
foreach my $var (keys %input) {
next if ($var eq "f");
next if (defined($DEFAULTVALUE{$var})
&& $DEFAULTVALUE{$var} eq $input{$var});
print "<INPUT TYPE=HIDDEN NAME=\"",urlencode($var),"\" VALUE=\"",
urlencode($input{$var}),"\">\n";
}
printDiffSelect($use_java_script);
print "<INPUT TYPE=SUBMIT VALUE=\"Show\">\n";
print "</FORM>\n";
print "</td>";
print "</tr></table>";
}
sub navigateHeader ($$$$$) {
my ($swhere,$path,$filename,$rev,$title) = @_;
$swhere = "" if ($swhere eq $scriptwhere);
$swhere = urlencode($filename) if ($swhere eq "");
print "<\!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0 Transitional//EN\">";
print "<HTML>\n<HEAD>\n";
local $charset = $config{'cvsenc'} || &get_charset();
if ($charset) {
print "<meta http-equiv=\"Content-Type\" content=\"text/html; Charset=$charset\">\n";
}
print '<!-- hennerik CVSweb $Revision: 1.112 $ -->';
print "\n<TITLE>$path$filename - $title - $rev</TITLE></HEAD>\n";
print "<BODY BGCOLOR=\"$backcolor\">\n";
print "<table width=\"100%\" border=0 cellspacing=0 cellpadding=1 bgcolor=\"$navigationHeaderColor\">";
print "<tr valign=bottom><td>";
print "<a href=\"$swhere$query#rev$rev\">$backicon";
print "</a> <b>Return to ", &link("$filename","$swhere$query#rev$rev")," CVS log";
print "</b> $fileicon</td>";
print "<td align=right>$diricon <b>Up to ", &clickablePath($path, 1), "</b></td>";
print "</tr></table>";
}
sub plural_write ($$)
{
my ($num,$text) = @_;
if ($num != 1) {
$text = $text . "s";
}
if ($num > 0) {
return $num . " " . $text;
}
else {
return "";
}
}
##
# print readable timestamp in terms of
# '..time ago'
# H. Zeller <zeller@think.de>
##
sub readableTime($$) {
my ($i, $break, $retval);
my ($secs,$long) = @_;
# this function works correct for time >= 2 seconds
if ($secs < 2) {
return "very little time";
}
my %desc = (1 , 'second',
60, 'minute',
3600, 'hour',
86400, 'day',
604800, 'week',
2628000, 'month',
31536000, 'year');
my @breaks = sort {$a <=> $b} keys %desc;
$i = 0;
while ($i <= $#breaks && $secs >= 2 * $breaks[$i]) {
$i++;
}
$i--;
$break = $breaks[$i];
$retval = plural_write(int ($secs / $break), $desc{"$break"});
if ($long == 1 && $i > 0) {
my $rest = $secs % $break;
$i--;
$break = $breaks[$i];
my $resttime = plural_write(int ($rest / $break),
$desc{"$break"});
if ($resttime) {
$retval = $retval . ", " . $resttime;
}
}
return $retval;
}
##
# clickablePath(String pathname, boolean last_item_clickable)
#
# returns a html-ified path whereas each directory is a link for
# faster navigation. last_item_clickable controls whether the
# basename (last directory/file) is a link as well
##
sub clickablePath($$) {
my ($pathname,$clickLast) = @_;
my $retval = '';
if ($pathname eq '/') {
# this should never happen - chooseCVSRoot() is
# intended to do this
$retval = "[$cvstree]";
}
else {
$retval = $retval . " <a href=\"${scriptname}/${query}#dirlist\">[$cvstree]</a>";
my $wherepath = '';
my ($lastslash) = $pathname =~ m|/$|;
foreach (split(/\//, $pathname)) {
$retval = $retval . " / ";
$wherepath = $wherepath . '/' . $_;
my ($last) = "$wherepath/" eq "/$pathname"
|| "$wherepath" eq "/$pathname";
if ($clickLast || !$last) {
$retval = $retval . "<a href=\"${scriptname}"
. urlencode($wherepath)
. (!$last || $lastslash ? '/' : '')
. ${query}
. (!$last || $lastslash ? "#dirlist" : "")
. "\">$_</a>";
}
else { # do not make a link to the current dir
$retval = $retval . $_;
}
}
}
return $retval;
}
sub chooseCVSRoot() {
my @foo;
foreach (sort keys %CVSROOT) {
if (-d $CVSROOT{$_}) {
push(@foo, $_);
}
}
if (@foo > 1) {
my ($k);
print "<form method=\"GET\" action=\"${scriptwhere}\">\n";
foreach $k (keys %input) {
print "<input type=hidden NAME=$k VALUE=$input{$k}>\n"
if ($input{$k}) && ($k ne "cvsroot");
}
# Form-Elements look wierd in Netscape if the background
# isn't gray and the form elements are not placed
# within a table ...
print "<table><tr>";
print "<td>CVS Root:</td>";
print "<td>\n<select name=\"cvsroot\"";
print " onchange=\"submit()\"" if ($use_java_script);
print ">\n";
foreach $k (@foo) {
print "<option value=\"$k\"";
print " selected" if ("$k" eq "$cvstree");
print ">" . ($CVSROOTdescr{"$k"} ? $CVSROOTdescr{"$k"} :
$k). "</option>\n";
}
print "</select>\n</td>";
print "<td><input type=submit value=\"Go\"></td>";
print "</tr></table></form>";
}
else {
# no choice ..
print "CVS Root: <b>[$cvstree]</b>";
}
}
sub chooseMirror() {
my ($mirror,$moremirrors);
$moremirrors = 0;
# This code comes from the original BSD-cvsweb
# and may not be useful for your site; If you don't
# set %MIRRORS this won't show up, anyway
#
# Should perhaps exlude the current site somehow..
if (keys %MIRRORS) {
print "\nThis cvsweb is mirrored in:\n";
foreach $mirror (keys %MIRRORS) {
print ", " if ($moremirrors);
print qq(<a href="$MIRRORS{$mirror}">$mirror</A>\n);
$moremirrors = 1;
}
print "<p>\n";
}
}
sub fileSortCmp() {
my ($comp) = 0;
my ($c,$d,$af,$bf);
($af = $a) =~ s/,v$//;
($bf = $b) =~ s/,v$//;
my ($rev1,$date1,$log1,$author1,$filename1) = @{$fileinfo{$af}}
if (defined($fileinfo{$af}));
my ($rev2,$date2,$log2,$author2,$filename2) = @{$fileinfo{$bf}}
if (defined($fileinfo{$bf}));
if (defined($filename1) && defined($filename2) && $af eq $filename1 && $bf eq $filename2) {
# Two files
$comp = -revcmp($rev1, $rev2) if ($byrev && $rev1 && $rev2);
$comp = ($date2 <=> $date1) if ($bydate && $date1 && $date2);
$comp = ($log1 cmp $log2) if ($bylog && $log1 && $log2);
$comp = ($author1 cmp $author2) if ($byauthor && $author1 && $author2);
}
if ($comp == 0) {
# Directories first, then sorted on name if no other sort critera
# available.
my $ad = ((-d "$fullname/$a")?"D":"F");
my $bd = ((-d "$fullname/$b")?"D":"F");
($c=$a) =~ s|.*/||;
($d=$b) =~ s|.*/||;
$comp = ("$ad$c" cmp "$bd$d");
}
return $comp;
}
# make A url for downloading
sub download_url($$$) {
my ($url,$revision,$mimetype) = @_;
$revision =~ s/\.0\././;
if (defined($checkout_magic)
&& (!defined($mimetype) || $mimetype ne "text/x-cvsweb-markup")) {
my ($path);
($path = $where) =~ s|/[^/]*$|/|;
$url = "$scriptname/$checkoutMagic/${path}$url";
}
$url .= "?rev=$revision";
$url .= "&content-type=$mimetype" if (defined($mimetype));
return $url;
}
# Presents a link to download the
# selected revision
sub download_link($$$$) {
my ($url,$revision,$textlink,$mimetype) = @_;
my ($fullurl) = download_url($url,$revision,$mimetype);
my ($paren) = $textlink =~ /^\(/;
$textlink =~ s/^\(// if ($paren);
$textlink =~ s/\)$// if ($paren);
print "(" if ($paren);
print "<A HREF=\"$fullurl";
print $barequery;
print "\"";
if ($open_extern_window && (!defined($mimetype) || $mimetype ne "text/x-cvsweb-markup")) {
print " target=\"cvs_checkout\"";
# we should have
# 'if (document.cvswin==null) document.cvswin=window.open(...'
# in order to allow the user to resize the window; otherwise
# the user may resize the window, but on next checkout - zap -
# its original (configured s. cvsweb.conf) size is back again
# .. annoying (if $extern_window_(width|height) is defined)
# but this if (..) solution is far from perfect
# what we need to do as well is
# 1) save cvswin in an invisible frame that always exists
# (document.cvswin will be void on next load)
# 2) on close of the cvs_checkout - window set the cvswin
# variable to 'null' again - so that it will be
# reopenend with the configured size
# anyone a JavaScript programmer ?
# .. so here without if (..):
# currently, the best way is to comment out the size parameters
# ($extern_window...) in cvsweb.conf.
if ($use_java_script) {
print " onClick=\"window.open('$fullurl','cvs_checkout',";
print "'resizeable,scrollbars";
print ",status,toolbar" if (defined($mimetype)
&& $mimetype eq "text/html");
print ",width=$extern_window_width" if (defined($extern_window_width));
print ",height=$extern_window_height" if (defined($extern_window_height));
print"');\"";
}
}
print "><b>$textlink</b></A>";
print ")" if ($paren);
}
# Returns a Query string with the
# specified parameter toggled
sub toggleQuery($$) {
my ($toggle,$value) = @_;
my ($newquery,$var);
my (%vars);
%vars = %input;
if (defined($value)) {
$vars{$toggle} = $value;
}
else {
$vars{$toggle} = $vars{$toggle} ? 0 : 1;
}
# Build a new query of non-default paramenters
$newquery = "";
foreach $var (@stickyvars) {
my ($value) = defined($vars{$var}) ? $vars{$var} : "";
my ($default) = defined($DEFAULTVALUE{$var}) ? $DEFAULTVALUE{$var} : "";
if ($value ne $default) {
$newquery .= "&" if ($newquery ne "");
$newquery .= urlencode($var) . "=" . urlencode($value);
}
}
if ($newquery) {
return '?' . $newquery;
}
return "";
}
sub urlencode($) {
my ($in) = @_;
my ($out);
($out = $in) =~ s/([\000-+{-\377])/sprintf("%%%02x", ord($1))/ge;
return $out;
}
sub http_header(;$) {
my $content_type = shift || "text/html";
my $is_mod_perl = defined($ENV{'MOD_PERL'});
if (defined($moddate)) {
if ($is_mod_perl) {
Apache->request->header_out("Last-Modified" => scalar gmtime($moddate) . " GMT");
}
else {
print "Last-Modified: " . scalar gmtime($moddate) . " GMT\r\n";
}
}
if ($is_mod_perl) {
Apache->request->content_type($content_type);
}
else {
print "Content-type: $content_type\r\n";
}
if ($allow_compress && $maycompress) {
if ($has_zlib || (defined($GZIPBIN) && open(GZIP, "|$GZIPBIN -1 -c"))) {
if ($is_mod_perl) {
Apache->request->content_encoding("x-gzip");
Apache->request->header_out(Vary => "Accept-Encoding");
Apache->request->send_http_header;
}
else {
print "Content-encoding: x-gzip\r\n";
print "Vary: Accept-Encoding\r\n"; #RFC 2068, 14.43
print "\r\n"; # Close headers
}
$| = 1; $| = 0; # Flush header output
if ($has_zlib) {
tie *GZIP, __PACKAGE__, \*STDOUT;
}
select(GZIP);
$gzip_open = 1;
# print "<!-- gzipped -->" if ($content_type eq "text/html");
}
else {
if ($is_mod_perl) {
Apache->request->send_http_header;
}
else {
print "\r\n"; # Close headers
}
print "<font size=-1>Unable to find gzip binary in the \$PATH to compress output</font><br>";
}
}
else {
if ($is_mod_perl) {
Apache->request->send_http_header;
}
else {
print "\r\n"; # Close headers
}
}
}
sub html_header($) {
&ui_print_header(undef, $text{'cvsweb_title'}, "");
# if (!&has_command("rlog")) {
# print "<p>",&text('cvsweb_ecmd', "<tt>rlog</tt>"),"<p>\n";
# &ui_print_footer("", $text{'index_return'});
# exit;
# }
if (!&has_command("rlog")) {
$no_rlog++;
}
return;
}
sub html_footer() {
&ui_print_footer("", $text{'index_return'});
return undef;
}
sub link_tags($)
{
my ($tags) = @_;
my ($ret) = "";
my ($fileurl,$filename);
($filename = $where) =~ s/^.*\///;
$fileurl = urlencode($filename);
foreach my $sym (split(", ", $tags)) {
$ret .= ",\n" if ($ret ne "");
$ret .= "<A HREF=\"$fileurl"
. toggleQuery('only_with_tag',$sym) . "\">$sym</A>";
}
return $ret."\n";
}
#
# See if a module is listed in the config file's @HideModule list.
#
sub forbidden_module($) {
my($module) = @_;
return checkForbidden($module, @HideModules);
}
sub forbidden_file($) {
my($file) = @_;
$file =~ s|^.*/||;
return checkForbidden($file, @DissallowRead);
}
sub checkForbidden($@) {
my($item, @list) = @_;
for (my $i=0; $i < @list; $i++) {
return 1 if $item =~ $list[$i];
}
return 0;
}
# Close the GZIP handle remove the tie.
sub gzipclose() {
if ($gzip_open) {
select(STDOUT);
close(GZIP);
untie *GZIP;
$gzip_open = 0;
}
}
# implement a gzipped file handle via the Compress:Zlib compression
# library.
sub MAGIC1() { 0x1f }
sub MAGIC2() { 0x8b }
sub OSCODE() { 3 }
sub TIEHANDLE {
my ($class, $out) = @_;
my ($d) = Compress::Zlib::deflateInit(-Level => Compress::Zlib::Z_BEST_COMPRESSION(),
-WindowBits => -Compress::Zlib::MAX_WBITS()) or return undef;
my ($o) = {
handle => $out,
dh => $d,
crc => 0,
len => 0,
};
my ($header) = pack("c10", MAGIC1, MAGIC2, Compress::Zlib::Z_DEFLATED(), 0,0,0,0,0,0, OSCODE);
print {$o->{handle}} $header;
return bless($o, $class);
}
sub PRINT {
my ($o) = shift;
my ($buf) = join(defined $, ? $, : "",@_);
my ($len) = length($buf);
my ($compressed, $status) = $o->{dh}->deflate($buf);
print {$o->{handle}} $compressed if defined($compressed);
$o->{crc} = Compress::Zlib::crc32($buf, $o->{crc});
$o->{len} += $len;
return $len;
}
sub PRINTF {
my ($o) = shift;
my ($fmt) = shift;
my ($buf) = sprintf($fmt, @_);
my ($len) = length($buf);
my ($compressed, $status) = $o->{dh}->deflate($buf);
print {$o->{handle}} $compressed if defined($compressed);
$o->{crc} = Compress::Zlib::crc32($buf, $o->{crc});
$o->{len} += $len;
return $len;
}
sub WRITE {
my ($o, $buf, $len, $off) = @_;
my ($compressed, $status) = $o->{dh}->deflate(substr($buf, 0, $len));
print {$o->{handle}} $compressed if defined($compressed);
$o->{crc} = Compress::Zlib::crc32(substr($buf, 0, $len), $o->{crc});
$o->{len} += $len;
return $len;
}
sub CLOSE {
my ($o) = @_;
return if !defined( $o->{dh});
my ($buf) = $o->{dh}->flush();
$buf .= pack("V V", $o->{crc}, $o->{len});
print {$o->{handle}} $buf;
undef $o->{dh};
}
sub DESTROY {
my ($o) = @_;
CLOSE($o);
}
|