# This is a basic configuration file with some examples, for device mapper
# multipath.
# For a complete list of the default configuration values, see
# /usr/share/doc/device-mapper-multipath-0.4.7/multipath.conf.defaults
# For a list of configuration options with descriptions, see
# /usr/share/doc/device-mapper-multipath-0.4.7/multipath.conf.annotated


# Blacklist all devices by default. Remove this to enable multipathing
# on the default devices. 
blacklist {
        devnode "*"
}

## By default, devices with vendor = "IBM" and product = "S/390.*" are
## blacklisted. To enable mulitpathing on these devies, uncomment the
## following lines.
#blacklist_exceptions {
#    device {
#        vendor    "IBM"
#        product    "S/390.*"
#    }
#}

## Use user friendly names, instead of using WWIDs as names.
defaults {
    user_friendly_names yes
}
##
## Here is an example of how to configure some standard options.
##
#
#defaults {
#    udev_dir        /dev
#    polling_interval     10
#    selector        "round-robin 0"
#    path_grouping_policy    multibus
#    getuid_callout        "/sbin/scsi_id -g -u -s /block/%n"
#    prio_callout        /bin/true
#    path_checker        readsector0
#    rr_min_io        100
#    max_fds            8192
#    rr_weight        priorities
#    failback        immediate
#    no_path_retry        fail
#    user_friendly_names    yes
#}
##
## The wwid line in the following blacklist section is shown as an example
## of how to blacklist devices by wwid.  The 2 devnode lines are the
## compiled in default blacklist. If you want to blacklist entire types
## of devices, such as all scsi devices, you should use a devnode line.
## However, if you want to blacklist specific devices, you should use
## a wwid line.  Since there is no guarantee that a specific device will
## not change names on reboot (from /dev/sda to /dev/sdb for example)
## devnode lines are not recommended for blacklisting specific devices.
##
#blacklist {
#       wwid 26353900f02796769
#    devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*"
#    devnode "^hd[a-z]"
#}
#multipaths {
#    multipath {
#        wwid            3600508b4000156d700012000000b0000
#        alias            yellow
#        path_grouping_policy    multibus
#        path_checker        readsector0
#        path_selector        "round-robin 0"
#        failback        manual
#        rr_weight        priorities
#        no_path_retry        5
#    }
#    multipath {
#        wwid            1DEC_____321816758474
#        alias            red
#    }
#}
#devices {
#    device {
#        vendor            "COMPAQ  "
#        product            "HSV110 (C)COMPAQ"
#        path_grouping_policy    multibus
#        getuid_callout          "/sbin/scsi_id -g -u -s /block/%n"
#        path_checker        readsector0
#        path_selector        "round-robin 0"
#        hardware_handler    "0"
#        failback        15
#        rr_weight        priorities
#        no_path_retry        queue
#    }
#    device {
#        vendor            "COMPAQ  "
#        product            "MSA1000         "
#        path_grouping_policy    multibus
#    }
#}